On any road especially in rural areas.

To warn that there is an obstruction or temporary obstruction next to the road and that the road alignment to the left or right hand side is altered.

Do not pass to the right.

Overview The Temporary Hazard Marker Signs (South Africa) – Danger Plate Sign is used on public roads, especially in rural areas, to warn drivers of a hazardous obstruction near the roadway that affects normal road alignment. What the Sign Means This sign indicates that there is a temporary or fixed obstruction close to the road, and traffic must adjust its path accordingly. It also warns drivers specifically not to pass on the side indicated as unsafe (for example, “do not pass to the right”). How It Works in Practice An object or barrier is partially blocking or narrowing the road. The road alignment shifts left or right to guide traffic safely. Passing on the wrong side may lead to collisions or leaving the roadway. It is commonly used as a temporary safety measure in work zones or rural hazards. Driver Responsibilities Follow the indicated safe side of passage Slow down when approaching the obstruction Do not attempt to pass on the prohibited side Stay alert for additional warning signs or barriers Where You Will See This Sign This sign is commonly found: In rural areas with roadside obstacles At roadworks or maintenance zones Near damaged roads or temporary hazards Where road alignment is temporarily changed Purpose of the Sign The purpose of the danger plate sign is to safely guide traffic around a roadside obstruction by clearly indicating the correct direction of travel and preventing vehicles from entering hazardous areas. Common Mistakes to Avoid Ignoring the instruction to avoid one side Driving too fast near the obstruction Failing to follow the temporary road alignment Assuming the road continues straight as normal Safety Tips Slow down early when hazard markers are visible Follow directional arrows or markings carefully Maintain full attention on temporary road changes Proceed cautiously through the altered section Penalties for Ignoring the Sign Ignoring this warning may result in: Collisions with roadside obstacles or barriers Vehicle damage from unsafe detours Loss of control due to sudden manoeuvres Traffic fines for unsafe driving behaviour Summary The danger plate sign in South Africa warns drivers of a temporary roadside obstruction and guides them to pass safely on the correct side. Drivers must slow down and follow the indicated direction to avoid hazards.

On any road especially in rural areas.

To warn that there is an obstruction or temporary obstruction next to the road and that the road alignment to the left or right hand side is altered.

Do not pass to the left.

Overview The Temporary Hazard Marker Signs (South Africa) – Danger Plate Sign is used on public roads, especially in rural areas, to warn drivers of a roadside obstruction that temporarily alters the normal alignment of the road. What the Sign Means This sign indicates that there is an obstruction or hazard near the roadway, and traffic must deviate safely around it. It specifically instructs drivers that the left side is unsafe for passing in this case. How It Works in Practice An object or barrier is positioned close to or partially blocking the road. The roadway is temporarily shifted to guide vehicles safely around the obstruction. Passing on the left-hand side is prohibited due to danger or blockage. The sign forms part of temporary traffic control in hazard areas. Driver Responsibilities Slow down when approaching the hazard marker Do not pass on the left-hand side Follow the safe route indicated by road layout or additional signage Remain alert for workers, barriers, or uneven surfaces Where You Will See This Sign This sign is commonly found: In rural areas with roadside obstructions At roadworks or maintenance sites Where part of the road is damaged or closed Where temporary traffic diversion is required Purpose of the Sign The purpose of the danger plate sign is to safely direct traffic around a hazard by clearly indicating which side is unsafe to pass, preventing collisions and ensuring orderly movement through the affected area. Common Mistakes to Avoid Attempting to pass on the prohibited left side Driving too fast through temporary work zones Ignoring barriers or directional markings Assuming normal road alignment applies Safety Tips Reduce speed well before the hazard area Follow all temporary road signs and markings Stay focused on changes in road layout Proceed cautiously through narrowed or diverted sections Penalties for Ignoring the Sign Ignoring this warning may result in: Collisions with barriers or roadworks equipment Vehicle damage due to unsafe manoeuvres Endangering road workers or other motorists Traffic fines for non-compliance with road signage Summary The danger plate sign in South Africa warns drivers of a roadside obstruction and indicates that passing on the left is not allowed. Drivers must slow down and follow the safe alternative route to avoid hazards.

On any road especially in mountainous areas.

To warn that the road ahead curves suddenly

Slow down to take the curve at a safe speed or to be able to stop within the distance you can see.

Overview The Temporary Hazard Marker Signs (South Africa) – Sharp Curve Chevron Sign is used on public roads, especially in mountainous or high-risk areas, to clearly indicate a sharp change in road direction ahead. What the Sign Means This sign warns that the road ahead has a sudden and pronounced curve. It helps guide drivers through the bend and reduces the risk of leaving the roadway due to excessive speed or poor visibility. How It Works in Practice Multiple chevron boards point in the direction of the curve. The road bends sharply left or right ahead. Visibility through the curve may be limited. Speed control is essential to maintain vehicle stability. Driver Responsibilities Slow down well before entering the curve Follow the direction indicated by the chevron markers Maintain a steady steering input through the bend Be prepared to stop within visible distance if necessary Where You Will See This Sign This sign is commonly found: In mountainous or hilly regions On winding rural roads At sharp bends with limited visibility In temporary roadwork or diversion zones Purpose of the Sign The purpose of the sharp curve chevron sign is to clearly guide drivers through dangerous bends in the road, helping them maintain control and avoid running off the roadway or colliding with roadside obstacles. Common Mistakes to Avoid Approaching the curve at high speed Ignoring the direction indicated by chevrons Sudden braking while already in the curve Oversteering or understeering through the bend Safety Tips Reduce speed before entering the curve, not during it Look ahead through the bend where possible Keep both hands firmly on the steering wheel Drive smoothly and avoid sudden movements Penalties for Ignoring the Sign Ignoring sharp curve chevron warnings may result in: Loss of vehicle control Leaving the roadway or rolling over Collisions with roadside barriers or terrain Serious injury or fatal accidents Summary The sharp curve chevron sign in South Africa warns drivers of a sudden bend in the road. Drivers must slow down, follow the indicated direction, and maintain control to safely navigate the curve.

On any road especially in mountainous areas.

To warn that the road ahead curves suddenly

Slow down to take the curve at a safe speed or to be able to stop within the distance you can see.

Overview The Temporary Hazard Marker Signs (South Africa) – Sharp Curve Chevron Sign is used on roads, especially in mountainous or high-risk areas, to warn drivers of a sudden and sharp change in road direction ahead. What the Sign Means This sign indicates that the road ahead curves sharply to the left or right. The chevron boards visually guide drivers through the bend and highlight the safest direction of travel. How It Works in Practice Multiple chevron arrows point in the direction of the curve. The bend may be sharp and difficult to see in advance. Vehicle stability can be affected if speed is too high. Road edges or obstacles may be close to the travel path. Driver Responsibilities Slow down before reaching the curve Follow the direction indicated by the chevrons Maintain control of steering throughout the bend Be prepared to stop within visible distance if needed Where You Will See This Sign This sign is commonly found: In mountainous or hilly terrain On winding rural or gravel roads At sharp bends with limited visibility In temporary roadworks or diversion routes Purpose of the Sign The purpose of the sharp curve chevron sign is to clearly guide drivers through a dangerous bend, helping them reduce speed, stay in lane, and avoid leaving the roadway or losing control. Common Mistakes to Avoid Entering the curve at high speed Ignoring the direction of the chevrons Braking suddenly while already in the curve Overcorrecting steering during the bend Safety Tips Reduce speed well before the curve begins Look ahead to anticipate the bend Steer smoothly and consistently through the curve Keep a safe distance from road edges Penalties for Ignoring the Sign Ignoring this warning may result in: Loss of control on sharp bends Collisions with roadside barriers or terrain Vehicles leaving the roadway Serious injury or fatal accidents Summary The sharp curve chevron sign in South Africa warns drivers of a sudden bend in the road. Drivers must slow down, follow the indicated direction, and maintain control to navigate the curve safely.

On any road especially in mountainous areas.

To warn that the road ahead curves suddenly

Slow down to take the curve at a safe speed or to be able to stop within the distance you can see.

Overview The Temporary Hazard Marker Signs (South Africa) – Sharp Curve Chevron Sign is a warning sign used on roads, especially in mountainous areas, to indicate a sudden and sharp bend ahead. What the Sign Means This sign warns that the road changes direction abruptly. The chevron boards show the safest direction to follow through the curve and help drivers anticipate the bend in advance. How It Works in Practice The road curves sharply left or right ahead. Visibility through the bend may be limited. Multiple chevrons guide the correct path of travel. Higher speeds increase the risk of losing control. Driver Responsibilities Slow down before entering the curve Follow the direction indicated by the chevrons Maintain steady steering through the bend Be able to stop within the distance you can see Where You Will See This Sign This sign is commonly found: In mountainous and hilly regions On winding rural or gravel roads At sharp bends with limited visibility In temporary road diversions or work zones Purpose of the Sign The purpose of the sharp curve chevron sign is to warn drivers of a sudden change in road direction so they can reduce speed, follow the correct path, and maintain safe vehicle control through the bend. Common Mistakes to Avoid Approaching the curve too fast Ignoring the chevron direction markers Braking harshly while inside the curve Drifting out of lane due to poor control Safety Tips Reduce speed well before the curve begins Look ahead to anticipate the road direction Steer smoothly and avoid sudden movements Keep a safe and controlled driving line Penalties for Ignoring the Sign Ignoring this warning may result in: Loss of vehicle control on sharp bends Running off the road or overturning Collisions with roadside objects or barriers Serious injury or fatal accidents Summary The sharp curve chevron sign in South Africa warns drivers of a sudden bend in the road. Drivers must slow down, follow the indicated direction, and maintain control to safely navigate the curve.

On any road especially in mountainous areas.

To warn that the road ahead curves suddenly

Slow down to take the curve at a safe speed or to be able to stop within the distance you can see.

Overview The Temporary Hazard Marker Signs (South Africa) – Sharp Curve Chevron Sign is used on public roads, especially in mountainous or high-risk areas, to warn drivers of a sudden change in road direction ahead. What the Sign Means This sign indicates that the road ahead has a sharp bend. The chevron boards point in the direction of the curve and help drivers clearly see how the road turns. How It Works in Practice The road curves suddenly to the left or right. Visibility around the bend may be limited. The chevrons guide drivers through the safest path. Speed must be reduced to maintain control. Driver Responsibilities Slow down before entering the curve Follow the direction shown by the chevrons Drive at a speed that allows safe control through the bend Be able to stop within the distance you can see ahead Where You Will See This Sign This sign is commonly found: In mountainous or hilly areas On winding rural or gravel roads At sharp bends with poor visibility In temporary roadworks or diversion routes Purpose of the Sign The purpose of the sharp curve chevron sign is to warn drivers of an abrupt road bend so they can reduce speed, follow the correct direction, and maintain safe control of their vehicle. Common Mistakes to Avoid Entering the curve at excessive speed Ignoring the chevron direction indicators Braking suddenly while already in the curve Failing to adjust steering smoothly Safety Tips Reduce speed well in advance of the curve Look ahead to anticipate the bend Steer smoothly through the turn Maintain full control of the vehicle at all times Penalties for Ignoring the Sign Ignoring this warning may result in: Loss of vehicle control Vehicles leaving the roadway Collisions with roadside obstacles or terrain Serious injury or fatal crashes Summary The sharp curve chevron sign in South Africa warns drivers of a sudden bend in the road. Drivers must slow down, follow the indicated direction, and maintain control to navigate the curve safely.

On any road

To indicate danger from above

Slow down if needed and be on the lookout above.

Overview The Temporary Hazard Marker Signs (South Africa) – Overhead Danger Plate Sign are used on any road to warn drivers of a possible hazard above the roadway. These are typically temporary signs used in work zones, maintenance areas, or locations with overhead obstructions. What the Sign Means This sign indicates that there is a potential danger from above the road, such as low-hanging structures, equipment, cranes, temporary scaffolding, or overhead cables. The key purpose is: to warn of an overhead hazard and require drivers to slow down and stay alert to avoid contact with objects above the roadway. How It Works in Practice Temporary structures or equipment may extend over the road. Roadworks may involve cranes, scaffolding, or lifting equipment. Overhead cables or beams may reduce clearance height. Drivers must be aware of vertical (not just horizontal) hazards. Driver Responsibilities Slow down when approaching the warning area Look upward for any overhead obstructions Check vehicle height clearance if driving a tall vehicle Follow any additional temporary instructions or signage Where You Will See This Sign Road construction or maintenance zones Areas with overhead bridge or structure work Industrial zones with lifting equipment or cranes Temporary detours or diverted traffic routes Purpose of the Sign The overhead danger plate sign is used to alert drivers to hazards above the roadway, ensuring they reduce speed and remain alert to avoid collisions with structures or equipment extending over the road. Common Mistakes to Avoid Ignoring overhead clearance warnings Driving tall vehicles without checking height restrictions Focusing only on road-level hazards Proceeding at normal speed through work zones Safety Tips Always reduce speed in construction areas Scan both road level and overhead areas Confirm vehicle height clearance before passing under structures Follow all temporary roadwork instructions carefully Penalties for Ignoring the Sign Ignoring overhead hazard warnings may result in: Vehicle damage from overhead impact Serious injury to occupants Damage to construction equipment or infrastructure Fines for unsafe driving in work zones Summary The overhead danger plate sign in South Africa warns drivers of hazards above the road. Drivers must slow down, stay alert, and check for overhead obstructions to ensure safe passage.