On any road

To warn that there is a traffic circle ahead where you may need to yield to other traffic.

Slow down so that you can stop or drive around the circle at a safe speed. Look out for road traffic signs and markings which will tell you whether you have the right of way or whether you have to yield. If there is no indication you have to give way to traffic approaching from the right. Vehicles within a traffic circle have right of way. If you have right of way still look out for traffic in the circle which may not yield to you.

Overview The Temporary Direction of Movement Signs (South Africa) – Traffic Circle Sign are used on public roads to warn drivers that a traffic circle (roundabout) is ahead. These signs help regulate the flow of vehicles where roads intersect in a circular junction. What the Sign Means This sign indicates that you are approaching a traffic circle where vehicles circulate around a central island and must yield according to road markings or signage. Drivers must be prepared to slow down, yield, and merge safely. The key purpose is: to warn of an upcoming traffic circle and guide drivers on yielding and safe entry rules. How It Works in Practice Vehicles travel around a central circular junction. Approaching drivers must slow down and assess right-of-way rules. If no signs are present, traffic from the right generally has priority. Vehicles already in the circle usually have right of way. Driver Responsibilities Reduce speed when approaching the traffic circle Check for signage and road markings indicating priority Yield to traffic already inside the circle when required Enter only when it is safe to do so Where You Will See This Sign At intersections in urban and suburban areas On roads with improved traffic flow systems In residential areas to control vehicle speed At temporary or newly constructed junctions Rules of the Traffic Circle Vehicles inside the circle generally have right of way If no signs are present, yield to traffic from the right Always follow road markings and posted instructions Do not assume priority without checking conditions Purpose of the Sign The purpose of the traffic circle sign is to warn drivers of a circular intersection ahead and ensure they reduce speed, understand right-of-way rules, and enter safely to maintain smooth traffic flow. Common Mistakes to Avoid Entering the circle without checking for traffic Failing to yield when required Driving too fast into the junction Ignoring road markings and signage Safety Tips Slow down well before reaching the circle Look left and right for approaching vehicles Yield when in doubt about right of way Enter only when a safe gap is available Penalties for Ignoring the Sign Ignoring traffic circle rules may result in: Traffic fines or penalties Collisions due to failure to yield Dangerous merging incidents Legal liability for damages or injuries caused Summary The traffic circle sign in South Africa warns drivers of an upcoming roundabout where vehicles circulate around a central island. Drivers must slow down, observe right-of-way rules, and yield appropriately to ensure safe and efficient traffic movement.

On any road

To warn that there is a gentle curve ahead to the left or right.

Ensure that you drive at such a speed that you can take the curve safely or stop within the distance that you can see.

Overview The Temporary Direction of Movement Signs (South Africa) – Gentle Curve Sign are used on public roads to warn drivers of a gradual bend in the road ahead, either to the left or to the right. These signs help drivers adjust their speed and steering in advance for safe navigation. What the Sign Means This sign indicates that the road ahead will curve gently, requiring controlled steering and appropriate speed adjustment. While the curve is not sharp, drivers must still remain cautious and prepared. The key purpose is: to warn of a gentle left or right curve ahead and require drivers to adjust speed for safe driving. How It Works in Practice The road bends gradually to the left or right. Drivers must maintain control through the curve. Visibility may be slightly reduced depending on terrain. Safe speed is required to maintain stability through the bend. Driver Responsibilities Reduce speed before entering the curve if necessary Steer smoothly through the bend without sudden movements Keep within your lane at all times Ensure you can stop within visible distance if needed Where You Will See This Sign On rural and urban roads with gradual bends On highways and scenic routes In areas with natural road curvature due to terrain Before long sweeping bends in the road Purpose of the Sign The purpose of the gentle curve sign is to alert drivers of an upcoming bend in the road so they can adjust speed and steering early, ensuring safe and controlled movement through the curve. Common Mistakes to Avoid Approaching the curve at high speed Sudden steering corrections during the bend Drifting out of lane while turning Ignoring reduced visibility conditions Safety Tips Slow down before entering the curve Maintain steady steering throughout the bend Keep a safe and consistent lane position Be prepared for unexpected obstacles or changes in road conditions Penalties for Ignoring the Sign Ignoring gentle curve warnings may result in: Loss of vehicle control Road departure or rollover accidents Traffic fines for reckless or unsafe driving Damage to property or injury to passengers Summary The gentle curve sign in South Africa warns drivers of a gradual bend ahead. Drivers must adjust speed, steer smoothly, and maintain control to safely navigate the curve.

On any road

To warn that there is a gentle curve ahead to the left or right.

Ensure that you drive at such a speed that you can take the curve safely or stop within the distance that you can see.

Overview The Temporary Direction of Movement Signs (South Africa) – Gentle Curve Sign are used on public roads to warn drivers of a gradual bend in the road ahead, either to the left or right. These signs help drivers prepare to adjust speed and steering in advance for safe travel through the curve. What the Sign Means This sign indicates that the road ahead will curve gently in either direction. Although the bend is not sharp, drivers still need to adjust speed and maintain control to ensure safe passage. The key purpose is: to warn of a gentle left or right curve ahead and ensure drivers travel at a safe speed to maintain control or stop within visible distance. How It Works in Practice The road bends gradually to the left or right. Drivers must adjust speed before entering the curve. Visibility may be slightly reduced depending on surroundings. Safe control of the vehicle is required throughout the bend. Driver Responsibilities Reduce speed if necessary before entering the curve Maintain smooth and controlled steering Stay within your lane at all times Ensure you can stop safely within the visible distance Where You Will See This Sign On rural and urban roads with gradual bends On highways and long-distance routes In areas shaped by natural terrain Before long sweeping curves in the roadway Purpose of the Sign The purpose of the gentle curve sign is to warn drivers of an upcoming bend so they can adjust speed and steering early, ensuring safe control of the vehicle throughout the curve. Common Mistakes to Avoid Driving too fast into the curve Making sudden steering corrections Drifting out of lane during the bend Ignoring visibility and road conditions Safety Tips Slow down before entering the curve Steer smoothly and steadily Maintain a safe lane position Be prepared to stop if unexpected hazards appear Penalties for Ignoring the Sign Ignoring gentle curve warnings may result in: Loss of vehicle control Skidding or road departure accidents Traffic fines for unsafe driving Damage to vehicles or injury to passengers Summary The gentle curve sign in South Africa warns drivers of a gradual bend ahead. Drivers must reduce speed, maintain control, and drive carefully to safely navigate the curve within visible distance.

On any road

To warn that there is a sharp curve ahead to the left or right.

Slow down so that you can take the curve safely or stop within the distance that you can see.

Overview The Temporary Direction of Movement Signs (South Africa) – Sharp Curve Sign are used on public roads to warn drivers of a sudden, tight bend in the road ahead, either to the left or right. These signs are especially important in areas where visibility is limited or where road alignment changes quickly. What the Sign Means This sign indicates that the road ahead has a sharp curve requiring significant speed reduction and careful steering. The bend may reduce visibility and increase the risk of losing control if approached too fast. The key purpose is: to warn of a sharp left or right curve ahead and require drivers to slow down to safely navigate or stop within visible distance. How It Works in Practice The road changes direction abruptly to the left or right. Drivers must reduce speed significantly before entering the curve. Visibility may be limited around the bend. Vehicle control must be maintained throughout the turn. Driver Responsibilities Slow down well before reaching the curve Use smooth and controlled steering Stay within your lane at all times Be prepared to stop if hazards are visible ahead Where You Will See This Sign On mountainous or winding rural roads On highways with sudden directional changes In areas with limited visibility due to terrain or vegetation Before dangerous bends in temporary road layouts Purpose of the Sign The purpose of the sharp curve sign is to warn drivers of an abrupt change in road direction so they can reduce speed in advance and safely maintain control of their vehicles through the bend. Common Mistakes to Avoid Entering the curve at high speed Braking suddenly while in the curve Crossing into oncoming traffic lanes Ignoring reduced visibility ahead Safety Tips Slow down significantly before the curve Steer smoothly and avoid sudden movements Maintain full control of your vehicle Only proceed at a speed that allows safe stopping if needed Penalties for Ignoring the Sign Ignoring sharp curve warnings may result in: Loss of vehicle control or skidding Serious accidents such as rollovers or road departures Traffic fines for negligent or reckless driving Injury to occupants or other road users Summary The sharp curve sign in South Africa warns drivers of a sudden and tight bend in the road. Drivers must reduce speed, maintain careful control, and proceed cautiously to safely navigate the curve within visible distance.

On any road

To warn that there is a sharp curve ahead to the left or right.

Slow down so that you can take the curve safely or stop within the distance that you can see.

Overview The Temporary Direction of Movement Signs (South Africa) – Sharp Curve Sign are used on public roads to warn drivers of a sudden and pronounced bend in the road ahead, either to the left or right. These signs are important for preventing loss of control in areas with reduced visibility or tight road alignment. What the Sign Means This sign indicates that the road ahead curves sharply, requiring a significant reduction in speed and careful steering. The curve may limit visibility and increase the risk of accidents if approached too fast. The key purpose is: to warn of a sharp left or right curve ahead and require drivers to slow down so they can safely navigate or stop within visible distance. How It Works in Practice The road changes direction abruptly to the left or right. Drivers must reduce speed well in advance. Visibility around the bend may be limited. Careful steering is required to maintain control. Driver Responsibilities Slow down before entering the curve Maintain steady and controlled steering Stay within your lane at all times Be prepared to stop if hazards are visible ahead Where You Will See This Sign On winding rural or mountainous roads On highways with sudden directional changes In areas with limited visibility due to terrain or obstacles Near construction or temporary road diversions Purpose of the Sign The purpose of the sharp curve sign is to warn drivers of a sudden change in road direction so they can reduce speed in advance and safely maintain control of their vehicle through the bend. Common Mistakes to Avoid Approaching the curve at high speed Braking suddenly while inside the curve Drifting out of lane during the turn Ignoring reduced visibility ahead Safety Tips Slow down well before reaching the curve Steer smoothly without sudden movements Maintain full control of your vehicle Drive at a speed that allows safe stopping if necessary Penalties for Ignoring the Sign Ignoring sharp curve warnings may result in: Loss of vehicle control or skidding Serious accidents such as rollovers or road departures Traffic fines for negligent or reckless driving Injury to passengers or other road users Summary The sharp curve sign in South Africa warns drivers of a sudden and tight bend ahead. Drivers must reduce speed, maintain careful control, and proceed cautiously to safely navigate the curve within visible distance.

On any public road especially in mountainous areas.

To warn that there is a very sharp, U-shaped curve ahead to the left or right.

Slow down so that you can take the curve safely or stop within the distance you can see.

Overview The Temporary Direction of Movement Signs (South Africa) – Hairpin Bend Sign are used on public roads, especially in mountainous or steep terrain, to warn drivers of a very sharp U-shaped curve ahead to the left or right. These bends require extreme caution due to their tight turning radius. What the Sign Means This sign indicates that the road ahead makes a very sharp U-shaped turn (often close to 180 degrees). Drivers must significantly reduce speed and prepare for a tight turn that requires full attention and control. The key purpose is: to warn of a hairpin (U-shaped) bend ahead and require drivers to slow down to safely navigate or stop within visible distance. How It Works in Practice The road curves sharply back on itself in a tight U-shape. Visibility is often limited, especially in mountainous areas. Vehicles must slow to a very low and controlled speed. Steering must be precise to avoid leaving the roadway. Driver Responsibilities Reduce speed well in advance of the bend Use low gear where necessary for better control Steer smoothly and carefully through the turn Stay within your lane and avoid overtaking Where You Will See This Sign In mountainous or hilly regions On steep, winding rural roads Along scenic routes with sharp elevation changes In areas with extreme road curvature or switchbacks Purpose of the Sign The purpose of the hairpin bend sign is to warn drivers of an extremely sharp U-shaped turn so they can reduce speed in advance and maintain full control of their vehicle while navigating dangerous terrain. Common Mistakes to Avoid Approaching the bend at normal or high speed Sudden braking inside the curve Crossing into the opposite lane Overtaking near or within the bend Safety Tips Slow down significantly before reaching the bend Use low gear for better control on steep roads Steer gently and avoid abrupt movements Only proceed when the path is clear and safe Penalties for Ignoring the Sign Ignoring hairpin bend warnings may result in: Severe loss of vehicle control Run-off-road accidents or rollovers Traffic fines for reckless driving Serious injury or fatalities in extreme cases Summary The hairpin bend sign in South Africa warns drivers of a very sharp U-shaped curve, typically in mountainous areas. Drivers must reduce speed significantly, maintain full control, and proceed carefully to safely navigate the bend.

On any public road especially in mountainous areas.

To warn that there is a very sharp, U-shaped curve ahead to the left or right.

Slow down so that you can take the curve safely or stop within the distance you can see.

Overview The Temporary Direction of Movement Signs (South Africa) – Hairpin Bend Sign are used on public roads, especially in mountainous or steep terrain, to warn drivers of a very sharp U-shaped bend ahead to the left or right. These bends are among the most demanding road curves and require careful speed control. What the Sign Means This sign indicates that the road ahead turns back on itself in a tight U-shape (a hairpin bend). Drivers must reduce speed significantly to safely navigate the turn and maintain control of the vehicle. The key purpose is: to warn of a very sharp U-shaped hairpin bend ahead and require drivers to slow down to safely navigate or stop within visible distance. How It Works in Practice The road curves sharply back in the opposite direction. The bend often occurs on steep or mountainous terrain. Visibility around the curve may be limited. Very low speed is required to maintain control. Driver Responsibilities Slow down well before entering the hairpin bend Use low gear for better vehicle control on steep roads Steer smoothly and carefully through the turn Avoid overtaking or sudden movements Where You Will See This Sign In mountainous and hilly regions On steep rural roads with sharp elevation changes Along winding scenic or coastal routes In areas with extreme road curvature (switchbacks) Purpose of the Sign The purpose of the hairpin bend sign is to warn drivers of an extremely sharp U-shaped curve so they can reduce speed in advance and safely maintain control of their vehicle in difficult terrain conditions. Common Mistakes to Avoid Entering the bend at normal driving speed Braking suddenly while in the curve Crossing into the opposite lane Attempting to overtake near the bend Safety Tips Reduce speed significantly before the curve Use low gear for stability on steep sections Steer gently and maintain full control Only proceed when the road ahead is clear Penalties for Ignoring the Sign Ignoring hairpin bend warnings may result in: Severe loss of vehicle control Run-off-road or rollover accidents Traffic fines for reckless or negligent driving Serious injury or fatal collisions in extreme cases Summary The hairpin bend sign in South Africa warns drivers of a very sharp U-shaped turn, typically in mountainous areas. Drivers must slow down significantly, maintain careful control, and proceed cautiously to safely navigate the bend within visible distance.

On any public road especially in mountainous areas.

To warn of a series of curves ahead to the right.

Overview The Temporary Direction of Movement Signs (South Africa) – Winding Road Sign are used on public roads, especially in mountainous or rural areas, to warn drivers that a series of curves lies ahead. In this case, the road has multiple bends, typically starting or continuing to the right. What the Sign Means This sign indicates that the road ahead is not straight and contains multiple consecutive curves. Drivers should expect continuous steering adjustments and changing road direction. The key purpose is: to warn of a series of curves ahead to the right and require drivers to reduce speed and drive with caution. How It Works in Practice The road contains multiple bends in succession. The first or dominant direction of curvature is to the right. Visibility may be reduced due to repeated curves. Continuous steering adjustments are required. Driver Responsibilities Reduce speed before entering the winding section Maintain steady and controlled steering throughout Stay fully within your lane at all times Be prepared for unexpected changes in road direction Where You Will See This Sign In mountainous or hilly terrain On rural roads with natural curves Along scenic routes with changing elevation Before long sections of continuous bends Purpose of the Sign The purpose of the winding road sign is to warn drivers of a sequence of curves so they can reduce speed in advance and maintain safe, controlled driving throughout the winding section. Common Mistakes to Avoid Driving too fast into the winding section Overtaking in areas with limited visibility Failing to anticipate successive curves Making sudden steering corrections Safety Tips Slow down before entering the winding road Keep a steady grip and smooth steering control Stay alert for repeated changes in direction Drive at a speed that allows safe stopping if needed Penalties for Ignoring the Sign Ignoring winding road warnings may result in: Loss of vehicle control Road departure or rollover accidents Traffic fines for unsafe driving behaviour Serious injury or damage in severe cases Summary The winding road sign in South Africa warns drivers of a series of curves ahead, usually in mountainous areas. Drivers must reduce speed, stay alert, and maintain smooth control to safely navigate the continuous bends.

On any public road especially in mountainous areas.

To warn of a series of curves ahead to the left.

Overview The Temporary Direction of Movement Signs (South Africa) – Winding Road Sign are used on public roads, especially in mountainous or rural areas, to warn drivers that a series of curves is ahead. In this case, the curves predominantly lead to the left. What the Sign Means This sign indicates that the road ahead is winding, with multiple consecutive bends mainly turning to the left. Drivers should expect continuous changes in direction and reduced visibility. The key purpose is: to warn of a series of left-hand curves ahead and require drivers to reduce speed and proceed with caution. How It Works in Practice The road contains multiple successive left-hand bends. Continuous steering adjustments are required. Visibility may be limited between curves. Road conditions may change quickly from one bend to the next. Driver Responsibilities Reduce speed before entering the winding section Maintain smooth and controlled steering Stay fully within your lane at all times Remain alert for successive left-hand bends Where You Will See This Sign In mountainous or hilly terrain On rural roads with natural curvature Along scenic or forested routes Before long sections of continuous left bends Purpose of the Sign The purpose of the winding road sign is to warn drivers of a sequence of left-hand curves so they can reduce speed in advance and maintain safe and controlled driving throughout the winding section. Common Mistakes to Avoid Driving too fast into the winding section Overtaking in areas with limited visibility Failing to anticipate repeated left-hand curves Making sudden steering corrections Safety Tips Slow down before entering the winding road Steer smoothly through each curve Maintain a safe and steady lane position Drive at a speed that allows safe stopping if necessary Penalties for Ignoring the Sign Ignoring winding road warnings may result in: Loss of vehicle control Road departure or rollover accidents Traffic fines for unsafe driving behaviour Serious injury or damage in severe cases Summary The winding road sign in South Africa warns drivers of a series of left-hand curves ahead, typically in mountainous areas. Drivers must reduce speed, remain alert, and maintain smooth control to safely navigate the continuous bends.

On any public road especially in mountainous areas.

To warn that there are two sharp curves ahead in opposite directions. W210 indicates the first curve is to the right and W211 that the first curve is to the left.

Slow down enough to be able to round the curves safely or stop within the sight distance you can see.

Overview The Temporary Direction of Movement Signs (South Africa) – Combined Curves Sign is a warning sign used on public roads, especially in mountainous or winding areas. It indicates that there are two sharp curves ahead in opposite directions, requiring careful speed control and steering. What the Sign Means This sign warns drivers that the road ahead will bend sharply in one direction and then immediately in the opposite direction. The first curve may be either to the right or to the left, depending on the specific sign variant (W210 or W211). W210: First curve is to the right, followed by a left curve W211: First curve is to the left, followed by a right curve How It Works in Practice The road contains two consecutive sharp bends in opposite directions. Drivers must quickly adjust steering between curves. Visibility may be limited, especially in mountainous terrain. Speed must be low enough to maintain full control throughout both curves. Driver Responsibilities Slow down significantly before entering the first curve Maintain full control of steering through both bends Stay within your lane at all times Be prepared to stop within the visible distance if necessary Where You Will See This Sign This sign is commonly found: In mountainous or hilly regions On rural roads with sharp directional changes In areas with winding or narrow road layouts Purpose of the Sign The purpose of the combined curves sign is to warn drivers of two sharp, consecutive bends in opposite directions, allowing them to reduce speed early and safely navigate complex road geometry. Common Mistakes to Avoid Entering the first curve at excessive speed Failing to adjust quickly between bends Braking suddenly during the curve sequence Misjudging the sharpness of the second curve Safety Tips Reduce speed well before reaching the curves Steer smoothly and anticipate the second bend Keep both hands firmly on the steering wheel Stay alert for hidden hazards beyond the bends Penalties for Ignoring the Sign Ignoring combined curve warnings may result in: Loss of vehicle control Collisions due to excessive speed or misjudged steering Traffic fines for dangerous driving Serious injury in road accidents Summary The combined curves sign in South Africa warns of two sharp bends in opposite directions ahead. Drivers must slow down, maintain control, and carefully adjust steering to safely navigate both curves.

On any public road especially in mountainous areas.

To warn that there are two sharp curves ahead in opposite directions. W210 indicates the first curve is to the right and W211 that the first curve is to the left.

Slow down enough to be able to round the curves safely or stop within the sight distance you can see.

Overview The Temporary Direction of Movement Signs (South Africa) – Combined Curves Sign is a warning sign used on public roads, especially in mountainous or winding areas. It indicates that two sharp curves in opposite directions are ahead and that drivers must prepare for quick steering adjustments. What the Sign Means This sign warns that the road ahead contains two consecutive sharp bends in opposite directions. The first curve direction depends on the specific sign used: W210: First curve to the right, followed by a left curve W211: First curve to the left, followed by a right curve How It Works in Practice The road has two sharp bends in opposite directions in quick succession. Drivers must adjust steering rapidly between curves. Visibility may be limited, especially in mountainous terrain. Low speed is essential to maintain control through both bends. Driver Responsibilities Slow down significantly before reaching the first curve Maintain full control of steering through both bends Stay within your lane at all times Be prepared to stop within the distance you can see Where You Will See This Sign This sign is commonly found: In mountainous or hilly areas On rural roads with sharp directional changes Along winding roads with limited visibility Purpose of the Sign The purpose of the combined curves sign is to warn drivers of two sharp, opposite-direction bends ahead, allowing them to reduce speed early and safely navigate both curves without losing control. Common Mistakes to Avoid Entering the first curve at high speed Failing to adjust steering quickly between bends Braking suddenly mid-curve Misjudging the severity of the second curve Safety Tips Slow down well in advance of the warning sign Steer smoothly and anticipate both curves Keep both hands firmly on the steering wheel Stay alert for hidden hazards beyond the bends Penalties for Ignoring the Sign Ignoring combined curve warnings may result in: Loss of vehicle control Collisions due to excessive speed or poor steering Traffic fines for dangerous driving Serious injury in road accidents Summary The combined curves sign in South Africa warns of two sharp bends in opposite directions ahead, with W210 and W211 indicating the order of the curves. Drivers must slow down, maintain control, and carefully navigate both bends to ensure safe travel.

On any one-way road.

To warn that the one-way roadway you are travelling on will soon become a two-way roadway.

Be aware that you are entering a roadway with two-way traffic and have to be more careful when overtaking to allow for oncoming vehicles.

Overview The Temporary Direction of Movement Signs (South Africa) – Two-Way Traffic Sign is a warning sign used on roads where traffic conditions have been temporarily changed, usually due to construction or roadworks. It alerts drivers that a one-way road is about to become a two-way roadway. What the Sign Means This sign warns that the road you are currently travelling on as a one-way route will soon carry traffic in both directions. Drivers must prepare for oncoming vehicles in what was previously a single-direction flow. How It Works in Practice A one-way road transitions into a two-way traffic system ahead. Oncoming vehicles will soon share the same roadway. Road width or lane markings may be temporarily adjusted. Overtaking becomes more hazardous due to opposing traffic. Driver Responsibilities Slow down when approaching the change in traffic flow Stay alert for oncoming vehicles entering from the opposite direction Avoid unsafe overtaking in the transition area Follow any temporary lane markings or instructions Where You Will See This Sign This sign is commonly found: In road construction and maintenance zones Where traffic flow is temporarily altered At transitions between one-way and two-way systems Purpose of the Sign The purpose of the two-way traffic sign is to warn drivers that opposing traffic will soon share the same roadway, allowing them to reduce speed, adjust driving behaviour, and prepare for safer interaction with oncoming vehicles. Common Mistakes to Avoid Continuing to drive as if the road is still one-way Unsafe overtaking after the change begins Failing to expect oncoming traffic Ignoring temporary road layout changes Safety Tips Reduce speed early when approaching the sign Stay within your lane at all times Watch carefully for oncoming vehicles Only overtake when it is clearly safe to do so Penalties for Ignoring the Sign Ignoring this warning may result in: Traffic fines or penalties Head-on collisions with oncoming vehicles Legal consequences in the event of an accident Serious risk to all road users Summary The two-way traffic sign in South Africa warns drivers that a one-way road will soon become a two-way roadway. Drivers must slow down, stay alert for oncoming traffic, and avoid unsafe overtaking to ensure safe travel through the transition area.

In urban areas.

To warn that one-way street you are driving on will soon be crossed by a street that carries two-way traffic.

If you are driving in the left hand lane and want to turn to the right at the first intersection, change to the right hand lane in good time. If you are driving in the right hand lane and wish to turn to the left at the first intersection, change to the left hand lane in good time.

Overview The Temporary Direction of Movement Signs (South Africa) – Two-Way Traffic Crossroad Sign is a temporary warning sign used mainly in urban areas. It alerts drivers that they are travelling on a one-way street that will soon be crossed by a street carrying two-way traffic. What the Sign Means This sign warns that a one-way road ahead will intersect with a road where traffic flows in both directions. Drivers must prepare for cross-traffic coming from either side at the upcoming intersection. How It Works in Practice You are driving on a one-way street approaching an intersection. The intersecting road carries two-way traffic. Vehicles may approach from both the left and right at the crossing. Lane positioning is important for safe turning movements. Driver Responsibilities Slow down when approaching the intersection Be aware of cross-traffic from both directions Choose your lane early to prepare for turning Follow lane discipline to avoid last-minute changes Lane Position Guidance Left lane: Move to the right lane in advance if you plan to turn right at the first intersection Right lane: Move to the left lane in advance if you plan to turn left at the first intersection Where You Will See This Sign This sign is commonly found: In urban roadwork areas On temporary or adjusted one-way street systems At intersections where traffic flow has been modified Purpose of the Sign The purpose of the two-way traffic crossroad sign is to warn drivers of an upcoming intersection with opposing traffic flow, allowing them to position their vehicle correctly in advance and reduce the risk of confusion or collisions. Common Mistakes to Avoid Changing lanes too late before the intersection Not checking for cross-traffic from both directions Failing to plan turning movements early Ignoring temporary road layout changes Safety Tips Reduce speed well before reaching the intersection Check mirrors and blind spots before changing lanes Signal early when preparing to turn Stay alert for vehicles crossing from either direction Penalties for Ignoring the Sign Ignoring this warning may result in: Traffic fines for improper lane usage Collisions at intersections Legal consequences in the event of an accident Increased risk in complex urban traffic conditions Summary The two-way traffic crossroad sign in South Africa warns drivers on a one-way street that they will soon cross a road with two-way traffic. Drivers must slow down, choose the correct lane early, and stay alert for vehicles approaching from both directions.

On any road with more than one traffic lane in the direction you are travelling.

To warn that the double-lane road you are driving on narrows by a full lane from the left (W215 or TW215) or from the right-hand side.

Depending on which sign is displayed, change in good time to the lane that carries on.

Overview The Temporary Direction of Movement Signs (South Africa) – Lane Ends Sign is a warning sign used on multi-lane roads to indicate that the roadway is narrowing ahead. It alerts drivers that one traffic lane is ending and that they must merge safely into the remaining lane. What the Sign Means This sign warns that a dual-lane road in your direction of travel is reducing to a single lane. The lane closure may occur from either the left or the right side, depending on the specific sign variant (W215 or TW215). W215 / TW215: Lane ends from the left-hand side Alternative version indicates lane ends from the right-hand side How It Works in Practice A multi-lane road narrows to fewer lanes ahead. One lane will merge into the remaining lane of traffic. Drivers must adjust position early to avoid last-minute merging. Traffic flow may slow due to merging vehicles. Driver Responsibilities Begin merging well before the lane ends Check mirrors and blind spots before changing lanes Yield appropriately when merging into the remaining lane Maintain safe following distances during the merge Where You Will See This Sign This sign is commonly found: In road construction or maintenance zones On highways where lanes are temporarily reduced In areas where road width changes due to works or hazards Purpose of the Sign The purpose of the lane ends sign is to warn drivers that a lane is about to close, allowing them to merge early, reduce congestion, and prevent sudden or unsafe lane changes. Common Mistakes to Avoid Waiting until the last moment to merge Forcing entry into the remaining lane Ignoring surrounding traffic flow Failing to check blind spots before merging Safety Tips Merge early and smoothly when safe to do so Signal your intention clearly in advance Keep a safe and steady speed during merging Stay alert for other vehicles doing the same Penalties for Ignoring the Sign Ignoring lane-end warnings may result in: Traffic fines for unsafe lane changes Collisions during merging Increased traffic congestion Legal consequences in the event of an accident Summary The lane ends sign in South Africa warns drivers that a multi-lane road is narrowing ahead. Drivers must merge early, check blind spots, and adjust safely into the remaining lane to ensure smooth and safe traffic flow.

On any road with more than one traffic lane in the direction you are travelling.

To warn that the double-lane road you are driving on narrows by a full lane from the left (W215 or TW215) or from the right-hand side.

Depending on which sign is displayed, change in good time to the lane that carries on.

Overview The Temporary Direction of Movement Signs (South Africa) – Lane Ends Sign is a warning sign used on roads with multiple lanes in the same direction of travel. It informs drivers that one lane is ending ahead and that they must merge safely into the continuing lane. What the Sign Means This sign warns that a dual-lane road is narrowing to a single lane. The lane reduction may occur from either the left or the right side, depending on the specific version of the sign (W215 or TW215). Drivers must adjust their position in advance to stay in the lane that continues. W215 / TW215: Lane ends from the left-hand side Alternative version indicates lane ends from the right-hand side How It Works in Practice A road with multiple lanes narrows by one full lane ahead. Traffic must merge into the remaining lane. Lane closures may be gradual or sudden depending on road conditions. Early merging helps maintain smooth traffic flow. Driver Responsibilities Begin merging well before reaching the lane closure Check mirrors and blind spots before changing lanes Signal your intention clearly and in advance Yield appropriately when merging into the continuing lane Where You Will See This Sign This sign is commonly found: In construction and roadwork zones On highways where lanes are temporarily reduced Where road width changes due to maintenance or hazards Purpose of the Sign The purpose of the lane ends sign is to warn drivers of an upcoming lane reduction, allowing them to merge early, reduce congestion, and prevent sudden or unsafe lane changes. Common Mistakes to Avoid Waiting until the last moment to merge Forcing entry into the remaining lane Ignoring surrounding traffic conditions Failing to check blind spots before merging Safety Tips Merge early and smoothly when it is safe Maintain a steady and appropriate speed Keep a safe following distance during merging Stay alert for other drivers merging at the same time Penalties for Ignoring the Sign Ignoring lane-end warnings may result in: Traffic fines for unsafe lane changes Collisions during merging Traffic congestion and disruption Legal consequences in the event of an accident Summary The lane ends sign in South Africa warns drivers that a multi-lane road is narrowing ahead. Drivers must merge early, check blind spots, and safely move into the continuing lane to maintain smooth and safe traffic flow.

On any road

To warn that one or more concealed driveways enter the road you are driving on from the left or right in such a way that you cannot easily see the road or traffic travelling on that road.

Slow down so that you can stop or yield if there is cross traffic that do not yield at the intersection. Remember that a driver of such a vehicle that joins your road from the concealed driveway sometimes finds it also difficult to see you.

Overview The Temporary Direction of Movement Signs (South Africa) – Concealed Driveway Sign is a warning sign used on public roads to alert drivers to hidden or hard-to-see access points joining the road. It indicates that one or more driveways enter the roadway from the left or right, but visibility is limited. What the Sign Means This sign warns that concealed driveways are ahead, where vehicles may enter or exit the main road without clear visibility of oncoming traffic. Both you and the drivers emerging from the driveway may have difficulty seeing each other in time. How It Works in Practice Hidden driveways connect to the main road from either side. Vehicles may enter the road unexpectedly due to limited visibility. Cross traffic may not yield when joining the main road. Drivers on the main road must be prepared to react quickly. Driver Responsibilities Slow down when approaching the area Be prepared to stop or yield if necessary Stay alert for vehicles emerging from concealed entrances Maintain full control of speed and positioning Where You Will See This Sign This sign is commonly found: On rural roads with farms or private properties In suburban areas with hidden residential entrances Along roads with limited visibility due to vegetation, walls, or terrain Purpose of the Sign The purpose of the concealed driveway sign is to warn drivers of hidden access points entering the road, allowing them to reduce speed and remain alert for vehicles that may appear suddenly due to poor visibility. Common Mistakes to Avoid Driving at normal speed through low-visibility areas Assuming no vehicles will enter from driveways Failing to anticipate sudden vehicle movement Not slowing down in areas with dense vegetation or obstructions Safety Tips Reduce speed well before reaching concealed entrances Scan both sides of the road continuously Be prepared to stop at short notice Drive defensively, assuming other drivers may not see you Penalties for Ignoring the Sign Ignoring concealed driveway warnings may result in: Collisions with vehicles entering or exiting driveways Traffic fines for unsafe driving Legal consequences in the event of an accident Increased risk of injury to all road users Summary The concealed driveway sign in South Africa warns of hidden access points entering the road ahead. Drivers must slow down, stay alert, and be prepared to stop or yield due to limited visibility and unpredictable traffic movements.

On any road

To warn that one or more concealed driveways enter the road you are driving on from the left or right in such a way that you cannot easily see the road or traffic travelling on that road.

Slow down so that you can stop or yield if there is cross traffic that do not yield at the intersection. Remember that a driver of such a vehicle that joins your road from the concealed driveway sometimes finds it also difficult to see you.

Overview The Temporary Direction of Movement Signs (South Africa) – Concealed Driveway Sign is a warning sign used on public roads to alert drivers that hidden driveways join the roadway ahead. These driveways are not easily visible, increasing the risk of unexpected vehicle movements. What the Sign Means This sign warns that one or more concealed driveways enter the road from the left or right. Due to limited visibility, both main-road drivers and vehicles exiting the driveway may not clearly see each other in time. How It Works in Practice Driveways connect to the main road but are hidden or difficult to see. Vehicles may enter the roadway unexpectedly. Cross-traffic may not always yield when joining the road. Visibility is reduced due to obstacles such as walls, trees, or terrain. Driver Responsibilities Reduce speed when approaching the area Be prepared to stop or yield if necessary Watch carefully for vehicles emerging from hidden driveways Drive defensively and expect sudden movements Where You Will See This Sign This sign is commonly found: On rural roads with farms or private property entrances In suburban areas with obstructed residential driveways Along roads with poor visibility due to vegetation or structures Purpose of the Sign The purpose of the concealed driveway sign is to warn drivers of hidden access points entering the road, allowing them to slow down and remain alert for vehicles that may appear suddenly due to restricted visibility. Common Mistakes to Avoid Driving at normal speed through low-visibility areas Assuming no vehicles will enter from concealed driveways Failing to anticipate sudden merging traffic Ignoring visual obstructions along the roadside Safety Tips Slow down well before reaching concealed access points Scan both sides of the road continuously Be prepared to stop at short notice Drive defensively, expecting unpredictable movements Penalties for Ignoring the Sign Ignoring concealed driveway warnings may result in: Collisions with vehicles entering the road Traffic fines for unsafe or negligent driving Legal consequences in the event of an accident Increased risk of injury to all road users Summary The concealed driveway sign in South Africa warns of hidden road entrances ahead. Drivers must slow down, stay alert, and be prepared for sudden vehicle movements due to limited visibility at these junctions.

On any road

To warn that one or more concealed driveways enter the road you are driving on from the left or right in such a way that you cannot easily see the road or traffic travelling on that road.

Slow down so that you can stop or yield if there is cross traffic that do not yield at the intersection. Remember that a driver of such a vehicle that joins your road from the concealed driveway sometimes finds it also difficult to see you.

Overview The Temporary Direction of Movement Signs (South Africa) – Concealed Driveway Sign is a warning sign used on public roads to indicate hidden or difficult-to-see driveways entering the roadway ahead. It alerts drivers to increased risk due to limited visibility at these entry points. What the Sign Means This sign warns that one or more concealed driveways join the road from the left or right, where visibility is restricted. Drivers on both the main road and the driveway may not easily see each other in time to react safely. How It Works in Practice Hidden driveways enter the main road from either side. Vehicles may enter the road unexpectedly due to poor visibility. Cross-traffic may fail to yield when merging. Obstructions like walls, trees, or terrain reduce sight distance. Driver Responsibilities Slow down when approaching the area Be ready to stop or yield if necessary Watch carefully for vehicles emerging from concealed driveways Drive defensively due to reduced visibility Where You Will See This Sign This sign is commonly found: On rural roads with farm or private property entrances In suburban areas with hidden residential driveways Along roads with vegetation, walls, or terrain limiting visibility Purpose of the Sign The purpose of the concealed driveway sign is to warn drivers of hidden access points joining the road, helping them reduce speed and stay alert for vehicles that may enter unexpectedly due to limited sight distance. Common Mistakes to Avoid Maintaining normal speed in low-visibility areas Assuming no vehicles will emerge from hidden driveways Failing to anticipate sudden entry onto the roadway Ignoring roadside obstructions that limit visibility Safety Tips Slow down well in advance of concealed driveways Scan both sides of the road continuously Be prepared to stop at short notice Drive defensively and expect unexpected movements Penalties for Ignoring the Sign Ignoring this warning may result in: Collisions with vehicles entering from driveways Traffic fines for negligent driving Legal consequences in the event of an accident Increased risk of serious injury Summary The concealed driveway sign in South Africa warns of hidden road entrances ahead where visibility is limited. Drivers must slow down, remain alert, and be prepared to stop or yield due to unpredictable vehicle movements.