On any road

To warn that a hazard (a crossroad) is ahead in the road.

Approach it cautiously, look carefully and be able to stop if cross-traffic requires you to do so.

Overview The Road Layout Signs (South Africa) – Crossroad Sign is a warning sign used on public roads to alert drivers that a crossroad (an intersection where another road crosses ahead) is approaching. It helps drivers prepare for possible crossing traffic and changing right-of-way conditions. What the Sign Means A crossroad sign warns that another road intersects with your current road ahead. This means vehicles may be entering or crossing from multiple directions, creating a potential hazard if not approached carefully. How It Works in Practice The sign indicates an upcoming intersection with crossing traffic. Drivers must be prepared for vehicles entering from side roads. Right-of-way may vary depending on additional road markings or signals. Driver Responsibilities Approach the crossroad cautiously and reduce speed if necessary Look carefully in all directions for crossing traffic Be prepared to stop if other vehicles have right of way Do not assume your direction always has priority Where You Will See This Sign This sign is commonly found: On rural and urban roads approaching intersections Before uncontrolled junctions without traffic lights In areas with frequent crossing traffic Purpose of the Sign The purpose of the crossroad sign is to warn drivers of an upcoming intersection where traffic from other roads may cross their path, allowing them to adjust speed and driving behaviour in advance to prevent collisions. Common Mistakes to Avoid Failing to slow down when approaching a crossroad Not checking for vehicles from side roads Assuming right-of-way without confirmation Entering the intersection too quickly Safety Tips Always reduce speed when a crossroad sign is visible Scan left and right for approaching vehicles Be prepared to yield if necessary Approach intersections with full attention and control Penalties for Ignoring the Sign Ignoring a crossroad warning sign may result in: Traffic fines or penalties (if negligence is involved) Increased risk of collisions at intersections Legal consequences in the event of an accident Endangerment of other road users Summary The crossroad sign in South Africa is a warning sign that alerts drivers to an upcoming intersection where other roads cross their path. It requires drivers to approach cautiously, stay alert, and be prepared to stop if cross-traffic has the right of way.

On any road

To warn that you are approaching an intersection where you have right of way. (The thicker leg of the cross on the signs indicates which road has priority.)

Approach cautiously, look carefully and be able to stop if cross-traffic does not yield.

Overview The Road Layout Signs (South Africa) – Priority Crossroad Sign is a warning sign used to indicate that you are approaching an intersection where priority (right of way) is assigned to a specific road. It helps drivers understand which traffic flow has priority at a crossroad, improving safety and reducing confusion at intersections. What the Sign Means This sign shows a crossroad ahead and indicates which road has priority by using a thicker line on the diagram. If you are on the priority road, you generally have right of way, but you must still remain alert for other road users who may not yield. How It Works in Practice The thicker line on the sign indicates the priority road. Vehicles on the priority road have right of way at the intersection. Vehicles from non-priority roads must yield unless otherwise directed. All drivers must still exercise caution when approaching the intersection. Driver Responsibilities Approach the intersection with caution and reduced speed if necessary Be aware of vehicles entering from non-priority roads Be prepared to stop if another road user fails to yield Do not assume absolute safety even when you have priority Where You Will See This Sign This sign is commonly found: At rural and urban intersections without traffic lights On roads where priority flow has been established At junctions with uneven traffic distribution Purpose of the Sign The purpose of the priority crossroad sign is to clearly indicate right of way at intersections, reducing uncertainty and improving safety by showing which road has priority through the intersection. Common Mistakes to Avoid Assuming full safety without checking for other vehicles Failing to yield when entering from a non-priority road Approaching intersections too quickly Not paying attention to the direction of the priority road Safety Tips Always slow down when approaching any intersection Look carefully for vehicles from all directions Be prepared to stop even if you have priority Drive defensively at all crossroad junctions Penalties for Ignoring the Sign Ignoring priority rules at a crossroad may result in: Traffic fines or penalties Collisions due to failure to yield Legal consequences in the event of an accident Serious injury risk to road users Summary The priority crossroad sign in South Africa indicates which road has right of way at an intersection, shown by a thicker line on the diagram. Drivers must approach cautiously, observe carefully, and be prepared to stop if other vehicles do not yield, ensuring safe and orderly traffic flow.

On any road

To warn that you are approaching an intersection where you have to yield to cross-traffic. (The thicker leg of the cross on the sign indicates which road has priority.)

Approach cautiously, and yield to traffic approaching from left or right.

Overview The Road Layout Signs (South Africa) – Secondary Crossroad Sign is a warning sign used on public roads to indicate that you are approaching an intersection where you do not have priority. It alerts drivers that cross-traffic has right of way and that they must yield before entering or crossing the intersection. What the Sign Means This sign shows a crossroad layout and uses a thicker line to indicate the priority road. If your road is not shown as the thicker line, you are on the secondary road and must yield to traffic on the priority road coming from left or right. How It Works in Practice The thicker line on the sign indicates the priority road. Vehicles on the secondary road must yield to cross-traffic. Traffic approaching from left or right on the priority road has right of way. Drivers must only enter the intersection when it is safe and clear. Driver Responsibilities Reduce speed when approaching the intersection Yield to all cross-traffic on the priority road Look carefully left and right before entering Proceed only when the intersection is completely clear Where You Will See This Sign This sign is commonly found: At rural and urban intersections without traffic lights Where traffic flow is controlled by priority rules At junctions where one road carries heavier or continuous traffic Purpose of the Sign The purpose of the secondary crossroad sign is to warn drivers that they must yield at an upcoming intersection, helping prevent collisions and ensuring safe interaction between priority and non-priority roads. Common Mistakes to Avoid Failing to yield to cross-traffic Entering the intersection without checking both directions Misinterpreting which road has priority Approaching too fast to stop safely Safety Tips Always slow down well in advance of the intersection Check both left and right before proceeding Be prepared to come to a complete stop if necessary Do not assume the road is clear without confirming Penalties for Ignoring the Sign Ignoring a secondary crossroad (yield) requirement may result in: Traffic fines or penalties Collisions with cross-traffic vehicles Legal consequences if an accident occurs Serious injury or damage risks Summary The secondary crossroad sign in South Africa warns drivers that they must yield at an upcoming intersection. Traffic on the thicker (priority) road has right of way, and drivers must approach cautiously, yield to cross-traffic, and only proceed when it is safe.

On any road before you reach the place where two roads meet.

To warn that you are approaching an intersection where you have to turn sharp to the right or left.

Look out for cross-traffic. Slow down and be prepared to stop and go round the corner at a safe speed.

Overview The Road Layout Signs (South Africa) – T-Junction Sign is a warning sign used on public roads to indicate that a T-junction is ahead, where your current road ends and meets another road at a right angle. It prepares drivers for a mandatory left or right turn and helps improve safety by reducing sudden braking or last-minute manoeuvres. What the Sign Means A T-junction sign warns that the road you are travelling on will end ahead and you will need to turn either left or right. It also indicates the possibility of cross-traffic on the intersecting road, requiring caution before turning. How It Works in Practice The road ahead ends at a junction forming a “T” shape. You must turn either left or right—there is no straight ahead option. Cross-traffic may be present on the main road you are joining. Right-of-way depends on traffic rules or signage at the junction. Driver Responsibilities Slow down well in advance of the junction Be prepared to stop if required Check carefully for cross-traffic before turning Turn at a safe and controlled speed Where You Will See This Sign This sign is commonly found: On rural and suburban roads approaching junctions Before intersections where a road ends at another road In areas with limited visibility or higher-speed approaches Purpose of the Sign The purpose of the T-junction sign is to warn drivers that the road ahead ends and that they must turn left or right. It helps reduce sudden braking, prevents collisions, and ensures safe turning at intersections. Common Mistakes to Avoid Approaching the junction at high speed Failing to check for cross-traffic before turning Not reducing speed in time to make a safe turn Misjudging the sharpness of the turn Safety Tips Slow down early when you see a T-junction sign Look both directions for approaching traffic Signal your intended turn in advance Turn smoothly and avoid cutting corners Penalties for Ignoring the Sign Ignoring T-junction warnings may result in: Traffic fines or penalties Collisions with cross-traffic Legal consequences in the event of an accident Serious injury or vehicle damage Summary The T-junction sign in South Africa warns drivers that the road ahead ends and requires a left or right turn. Drivers must slow down, check for cross-traffic, and complete the turn safely and at an appropriate speed.

On any road

To warn that you are approaching an intersection where another road meet yours at an angle.

Look out for cross-traffic. Slow down and be prepared to stop.

Overview The Road Layout Signs (South Africa) – Skew T-Junction Sign is a warning sign used on public roads to indicate that a T-junction is ahead, but the intersecting road meets your road at an angle rather than a straight 90-degree junction. It alerts drivers to an unusual junction layout that may require extra caution when turning. What the Sign Means A skew T-junction sign warns that your current road will meet another road at an angled intersection. You will need to turn left or right, but the junction is not a standard straight T-shape, which may affect visibility and turning approach. How It Works in Practice The road ahead ends at an angled intersection. You must turn left or right onto the intersecting road. Cross-traffic may approach from an unexpected angle due to the layout. Visibility may be reduced compared to a normal T-junction. Driver Responsibilities Slow down well before reaching the junction Be prepared to stop if necessary Check carefully for cross-traffic from both directions Turn cautiously due to the angled road alignment Where You Will See This Sign This sign is commonly found: On rural roads with irregular junction layouts At intersections where roads meet at non-standard angles In areas with limited visibility or curved road approaches Purpose of the Sign The purpose of the skew T-junction sign is to warn drivers of an angled intersection ahead, allowing them to reduce speed, prepare for turning, and anticipate cross-traffic from less predictable directions. Common Mistakes to Avoid Approaching the junction too fast Failing to account for reduced visibility Not checking both directions for cross-traffic Misjudging the turning angle Safety Tips Reduce speed early when approaching the sign Scan carefully in both directions before turning Signal your intention well in advance Turn slowly and maintain full control of the vehicle Penalties for Ignoring the Sign Ignoring skew T-junction warnings may result in: Traffic fines or penalties Collisions due to misjudged turning or cross-traffic Legal consequences if an accident occurs Risk of injury to road users Summary The skew T-junction sign in South Africa warns drivers of an angled intersection ahead where the road meets another road at a non-standard angle. Drivers must slow down, stay alert for cross-traffic, and turn carefully due to reduced visibility and unusual road alignment.

On any road

To warn that you are approaching an intersection where another road meet yours at an angle.

Look out for cross-traffic. Slow down and be prepared to stop.

Overview The Road Layout Signs (South Africa) – Skew T-Junction Sign is a warning sign used on public roads to indicate that a skew (angled) T-junction is ahead. It alerts drivers that another road meets their current road at an angle, requiring extra caution when approaching and turning. What the Sign Means A skew T-junction sign warns that your road will intersect with another road at a non-90-degree angle. You will need to turn left or right, but the unusual angle of the junction may affect visibility and positioning. How It Works in Practice The road ahead ends at an angled intersection. You must turn left or right onto the intersecting road. Cross-traffic may approach from an unexpected direction due to the angle. The junction may require slower and more careful navigation than a standard T-junction. Driver Responsibilities Slow down well in advance of the junction Be prepared to stop if required Check carefully for cross-traffic in both directions Turn cautiously due to the angled road layout Where You Will See This Sign This sign is commonly found: On rural and suburban roads At intersections with non-standard road angles In areas with limited visibility or curved approaches Purpose of the Sign The purpose of the skew T-junction sign is to warn drivers of an angled intersection ahead, allowing them to reduce speed, prepare for turning, and safely manage cross-traffic that may approach from unusual directions. Common Mistakes to Avoid Approaching the junction too quickly Failing to check both directions for cross-traffic Misjudging the angle of the turn Not reducing speed early enough Safety Tips Slow down as soon as you see the warning sign Look carefully in both directions before turning Be prepared to stop completely if necessary Turn slowly and maintain full vehicle control Penalties for Ignoring the Sign Ignoring a skew T-junction warning may result in: Traffic fines or penalties Collisions with cross-traffic vehicles Legal consequences if an accident occurs Risk of injury to road users Summary The skew T-junction sign in South Africa warns drivers of an angled intersection where another road meets theirs. Drivers must slow down, stay alert for cross-traffic, and be prepared to stop before turning safely at the junction.

On any road before you reach the place where another road joins your road from the left or from the right.

To warn that traffic may be approaching you from the left or right-hand side.

Slow down so that you will be able to stop, or go around the corner or pass the intersection at a safe speed. Look out for other traffic at the intersection that might not yield.

Overview The Road Layout Signs (South Africa) – Side Road Junction Sign is a warning sign used on public roads to indicate that another road is joining your road from either the left or the right ahead. It alerts drivers to the presence of merging or crossing traffic that may enter the roadway unexpectedly. What the Sign Means A side road junction sign warns that traffic may enter your road from a side street at the upcoming intersection. This means vehicles could join from the left or right, creating a potential conflict point that requires caution. How It Works in Practice A side road will join your road ahead from either the left or right side. Vehicles from the side road may enter or cross your path. Right of way may depend on markings, signs, or traffic conditions. Drivers must be prepared for sudden vehicle movement from the side road. Driver Responsibilities Slow down when approaching the junction Be prepared to stop if necessary Check carefully for vehicles entering from the side road Proceed only when it is safe to do so Where You Will See This Sign This sign is commonly found: On rural and urban roads approaching intersections Before junctions where minor roads connect to main roads In areas with frequent merging or crossing traffic Purpose of the Sign The purpose of the side road junction sign is to warn drivers of an upcoming intersection where vehicles may enter from the side, allowing them to reduce speed, stay alert, and prevent collisions. Common Mistakes to Avoid Failing to reduce speed when approaching the junction Not checking for vehicles entering from the side road Assuming you always have right of way Approaching the intersection too fast to react safely Safety Tips Always slow down early when you see the warning sign Scan both sides of the road for entering vehicles Be ready to stop if another vehicle fails to yield Drive cautiously through all intersections Penalties for Ignoring the Sign Ignoring a side road junction warning may result in: Traffic fines or penalties (where negligence applies) Collisions with vehicles entering from side roads Legal consequences if an accident occurs Risk of injury to road users Summary The side road junction sign in South Africa warns drivers that a road is joining from the left or right ahead. Drivers must slow down, stay alert for merging traffic, and be prepared to stop or yield if necessary to ensure safe passage through the intersection.

On any road before you reach the place where another road joins your road from the left or from the right.

To warn that traffic may be approaching you from the left or right-hand side.

Slow down so that you will be able to stop, or go around the corner or pass the intersection at a safe speed. Look out for other traffic at the intersection that might not yield.

Overview The Road Layout Signs (South Africa) – Side Road Junction Sign are used on public roads to warn drivers that another road is joining the main road from either the left or right. These signs are important for preparing drivers for possible merging or crossing traffic ahead. What the Sign Means This sign indicates that a side road junction is approaching, meaning vehicles may enter the road you are travelling on from either side. Drivers must be aware that cross-traffic or merging traffic may not always yield. The key purpose is: to warn of an upcoming junction where vehicles may join your road from the left or right. How It Works in Practice A side road connects to your road from either the left or right. Vehicles may enter, merge, or cross into your lane. Traffic from the side road may not always stop or yield. Drivers must adjust speed and be ready for sudden movement. Driver Responsibilities Slow down when approaching the junction Stay alert for vehicles entering from both sides Be prepared to stop if necessary Proceed only when it is safe to do so Where You Will See This Sign On rural and urban roads At temporary road layouts and construction zones Where roadworks have altered normal intersections Before junctions with limited visibility Purpose of the Sign The purpose of the side road junction sign is to warn drivers of merging or crossing traffic from side roads so they can reduce speed, stay alert, and prevent collisions at intersections. Common Mistakes to Avoid Driving through the junction at full speed Failing to observe side traffic Assuming other vehicles will always yield Not preparing to stop when necessary Safety Tips Reduce speed early when approaching the sign Check both left and right for approaching vehicles Be ready to stop if cross-traffic enters Proceed only when the road is clear and safe Penalties for Ignoring the Sign Ignoring side road junction warnings may result in: Traffic fines or penalties Increased risk of intersection collisions Legal consequences in the event of an accident Liability for damage or injury caused Summary The side road junction sign in South Africa warns drivers that another road is joining from the left or right. Drivers must slow down, remain alert for merging traffic, and be prepared to stop if necessary to ensure safe travel through the intersection.

On any road before you reach the place where two roads join your road within a short distance.

To warn that your road is first joined by another road from the left hand side first and within a short distance by another from the right hand side or from the right first and then from the left.

Slow down and be prepared to stop or turn at a safe speed. Look out for traffic at the intersection that might not yield.

Overview The Road Layout Signs (South Africa) – Staggered Junction Sign are used on public roads to warn drivers that two side roads will join the main road in quick succession. These intersections do not occur directly opposite each other, but are offset (staggered) on either side of the road. What the Sign Means This sign indicates that your road will first be joined by a side road from one side (left or right), followed shortly by another side road from the opposite side. Drivers must be prepared for multiple turning or merging points within a short distance. The key purpose is: to warn of two closely spaced junctions on opposite sides of the road, requiring extra caution and speed reduction. How It Works in Practice A side road joins the main road from one side first. Shortly after, another side road joins from the opposite side. Vehicles may enter or cross from either junction. Traffic conditions may change rapidly within a short distance. Driver Responsibilities Slow down well in advance of the staggered junction area Be alert for vehicles entering from both sides in quick succession Be prepared to stop or yield if necessary Proceed carefully through both junctions Where You Will See This Sign On rural and urban roads with closely spaced intersections At temporary road layouts or construction zones Where road planning creates offset junctions In areas with limited visibility between intersections Purpose of the Sign The purpose of the staggered junction sign is to warn drivers of two nearby intersections on opposite sides of the road, allowing them to reduce speed and prepare for multiple potential conflict points. Common Mistakes to Avoid Maintaining high speed through both junctions Failing to anticipate the second side road Assuming only one intersection is present Not checking both sides for cross-traffic Safety Tips Reduce speed before entering the staggered junction area Stay alert for vehicles entering from both directions Be prepared to stop at either intersection Proceed only when both junctions are clear and safe Penalties for Ignoring the Sign Ignoring staggered junction warnings may result in: Traffic fines or penalties Increased risk of multiple intersection collisions Legal consequences in the event of an accident Liability for damage or injury caused Summary The staggered junction sign in South Africa warns drivers of two closely spaced side roads joining from opposite directions. Drivers must slow down, stay alert, and be prepared for multiple turning or merging points to ensure safe passage.

On any road before you reach the place where two roads join your road within a short distance.

To warn that your road is first joined by another road from the left hand side first and within a short distance by another from the right hand side or from the right first and then from the left.

Slow down and be prepared to stop or turn at a safe speed. Look out for traffic at the intersection that might not yield.

Overview The Road Layout Signs (South Africa) – Staggered Junction Sign are used on public roads to warn drivers that two side roads will join the main road in close succession. These junctions are offset from each other rather than being directly opposite. What the Sign Means This sign indicates that your road will be joined by one side road first (from either the left or right), followed shortly by another side road from the opposite side. Drivers must be prepared for multiple points of conflict within a short distance. The key purpose is: to warn of two closely spaced, offset junctions where traffic may enter from both sides in quick succession. How It Works in Practice A side road joins the main road from one side first. Another side road joins shortly after from the opposite side. Vehicles may enter, cross, or merge at both points. Drivers must be prepared for changing traffic conditions within a short distance. Driver Responsibilities Slow down well before reaching the staggered junction area Stay alert for traffic entering from both sides Be ready to stop or yield if necessary Proceed cautiously through both junctions Where You Will See This Sign On rural and urban roads with offset intersections At temporary road layouts and construction zones Where road design creates closely spaced junctions In areas with limited visibility between intersections Purpose of the Sign The purpose of the staggered junction sign is to warn drivers of two nearby intersections on opposite sides of the road so they can reduce speed and safely manage multiple potential traffic conflicts. Common Mistakes to Avoid Driving at normal speed through both junctions Failing to anticipate the second intersection Assuming only one side road exists Not checking both sides for merging traffic Safety Tips Reduce speed early when approaching the sign Scan both sides of the road carefully Be prepared to stop at either junction if needed Proceed only when both intersections are clear Penalties for Ignoring the Sign Ignoring staggered junction warnings may result in: Traffic fines or penalties Increased risk of multiple-vehicle collisions Legal consequences in the event of an accident Liability for damage or injury caused Summary The staggered junction sign in South Africa warns drivers of two closely spaced side roads joining from opposite sides. Drivers must slow down, remain alert, and be prepared for multiple merging or crossing points to ensure safe driving.

On any road

To warn that traffic could merge from the left or from the right at sharp angles.

Pass the intersection at a safe speed and look out for merging traffic that might not yield.

Overview The Road Layout Signs (South Africa) – Sharp Junction Sign are used on public roads to warn drivers of an upcoming intersection where traffic may join or cross at sharp angles from either the left or right. These signs are especially important in areas with limited visibility or unusual road geometry. What the Sign Means This sign indicates that a junction ahead has sharp-angle entry points, meaning vehicles may merge or cross your path from the left or right at an unexpected angle. Drivers must be prepared for sudden or fast-moving cross-traffic. The key purpose is: to warn of a sharp-angle intersection where merging traffic may not yield and caution is required. How It Works in Practice The road ahead has an intersection with sharp or angled entry points. Vehicles may merge quickly from the left or right side. Cross-traffic may have limited visibility or reaction time. Drivers must adjust speed and be ready for sudden movement. Driver Responsibilities Reduce speed when approaching the junction Stay alert for vehicles merging from sharp angles Be prepared to stop if traffic does not yield Proceed only when it is safe to do so Where You Will See This Sign On rural and urban roads with angled intersections At temporary road layouts and construction zones Where road design creates non-standard junctions In areas with limited visibility or fast merging traffic Purpose of the Sign The purpose of the sharp junction sign is to warn drivers of an angled intersection where merging traffic may enter unexpectedly, allowing them to reduce speed and prepare for safe interaction with other road users. Common Mistakes to Avoid Driving through the junction at high speed Failing to notice merging traffic from sharp angles Assuming other drivers will always yield Not preparing to stop if necessary Safety Tips Slow down well in advance of the junction Check both left and right for merging vehicles Be ready to stop if traffic enters unexpectedly Proceed only when the intersection is clear and safe Penalties for Ignoring the Sign Ignoring sharp junction warnings may result in: Traffic fines or penalties Increased risk of side-impact or merging collisions Legal consequences in the event of an accident Liability for damage or injury caused Summary The sharp junction sign in South Africa warns drivers of an upcoming intersection where traffic may merge from sharp angles. Drivers must slow down, stay alert, and be prepared to yield or stop to ensure safe passage.

On any road

To warn that traffic could merge from the left or from the right at sharp angles.

Pass the intersection at a safe speed and look out for merging traffic that might not yield.

Overview The Road Layout Signs (South Africa) – Sharp Junction Sign are used on public roads to warn drivers of an upcoming intersection where traffic may merge from the left or right at sharp angles. These conditions are common in areas with irregular road layouts, construction zones, or limited visibility. What the Sign Means This sign indicates that a junction ahead allows vehicles to enter or cross the main road at a sharp angle from either side. Drivers must be alert because merging traffic may appear suddenly and may not always yield. The key purpose is: to warn of a sharp-angle intersection where merging traffic may enter unexpectedly and caution is required. How It Works in Practice The road ahead includes an intersection with sharp-angle entry points. Vehicles may merge quickly from the left or right. Cross-traffic may have limited visibility or reaction time. Traffic conditions may change suddenly near the junction. Driver Responsibilities Reduce speed when approaching the junction Watch carefully for merging or crossing vehicles Be prepared to stop if necessary Proceed only when it is safe and clear Where You Will See This Sign On rural and urban roads with angled intersections At temporary road layouts and construction areas Where road design creates non-standard junction angles In areas with limited visibility or fast-moving cross-traffic Purpose of the Sign The purpose of the sharp junction sign is to alert drivers to intersections where vehicles may merge at sharp angles, helping them reduce speed, stay alert, and avoid collisions with unexpected traffic movements. Common Mistakes to Avoid Driving through the junction at normal or high speed Failing to notice merging traffic from either side Assuming other drivers will always yield Not preparing to stop when required Safety Tips Slow down early when approaching the sign Check both sides for approaching vehicles Be ready to stop if traffic enters suddenly Proceed only when the intersection is clear and safe Penalties for Ignoring the Sign Ignoring sharp junction warnings may result in: Traffic fines or penalties Increased risk of merging or side-impact collisions Legal consequences in the event of an accident Liability for damage or injury caused Summary The sharp junction sign in South Africa warns drivers of an upcoming intersection where traffic may merge from sharp angles. Drivers must slow down, remain alert, and be prepared to stop or yield to ensure safe travel through the area.

On any road

To warn that traffic could merge from the left or from the right at sharp angles.

Pass the intersection at a safe speed and look out for merging traffic that might not yield.

Overview The Road Layout Signs (South Africa) – Sharp Junction Sign are used on public roads to warn drivers that an upcoming intersection allows traffic to merge or cross at sharp angles from either the left or right. These situations often occur where road layouts are irregular, visibility is limited, or traffic patterns are altered. What the Sign Means This sign indicates that a junction ahead has sharp-angle entry points, meaning vehicles may enter or cross your path quickly from either side. Drivers must be alert because merging traffic may not always yield or may appear suddenly. The key purpose is: to warn of a sharp-angle intersection where merging traffic may not yield and extra caution is required. How It Works in Practice The road ahead includes an intersection with sharp or angled approaches. Vehicles may merge from the left or right at unexpected angles. Cross-traffic may have limited visibility or reaction time. Traffic conditions can change quickly near the junction. Driver Responsibilities Reduce speed well before reaching the intersection Stay alert for vehicles entering from both sides Be prepared to stop if merging traffic does not yield Proceed only when the intersection is safe and clear Where You Will See This Sign On rural and urban roads with angled intersections At temporary road layouts and construction zones Where road design creates non-standard junction angles In areas with reduced visibility or fast-moving traffic Purpose of the Sign The purpose of the sharp junction sign is to alert drivers to intersections where vehicles may merge from sharp angles, allowing them to reduce speed, stay alert, and avoid potential collisions. Common Mistakes to Avoid Driving through the junction at normal speed Failing to observe merging traffic from either side Assuming other drivers will always yield Not being prepared to stop when necessary Safety Tips Slow down early when approaching the sign Check both directions carefully for vehicles Be ready to stop if traffic enters suddenly Proceed only when it is safe to do so Penalties for Ignoring the Sign Ignoring sharp junction warnings may result in: Traffic fines or penalties Increased risk of side-impact or merging collisions Legal consequences in the event of an accident Liability for damage or injury caused Summary The sharp junction sign in South Africa warns drivers of an upcoming angled intersection where traffic may merge unexpectedly. Drivers must slow down, stay alert, and be prepared to yield or stop to ensure safe passage through the junction.

On any road

To warn that traffic could merge from the left or from the right at sharp angles.

Pass the intersection at a safe speed and look out for merging traffic that might not yield.

Overview The Road Layout Signs (South Africa) – Sharp Junction Sign are used on public roads to warn drivers of an upcoming intersection where vehicles may merge from either the left or right at sharp angles. These signs are common in areas with unusual road geometry, construction activity, or limited visibility. What the Sign Means This sign indicates a sharp-angle junction ahead where traffic from side roads may enter or cross your path quickly. Drivers must be alert because merging vehicles may appear suddenly and may not always yield. The key purpose is: to warn of a sharp-angle intersection where merging traffic may enter unexpectedly and caution is required. How It Works in Practice The road ahead includes an intersection with sharp entry angles. Vehicles may merge from the left or right at unusual angles. Cross-traffic may have limited visibility or reaction time. Traffic conditions can change quickly at the junction. Driver Responsibilities Reduce speed when approaching the junction Watch carefully for vehicles entering from both sides Be prepared to stop if merging traffic does not yield Proceed only when it is safe and clear Where You Will See This Sign On rural and urban roads with angled intersections At temporary road layouts and construction zones Where road design creates non-standard junction angles In areas with limited visibility or fast-moving cross-traffic Purpose of the Sign The purpose of the sharp junction sign is to warn drivers of intersections where vehicles may merge at sharp angles, allowing them to reduce speed, stay alert, and avoid potential collisions. Common Mistakes to Avoid Driving through the junction at normal speed Failing to observe merging traffic from either side Assuming other drivers will always yield Not being prepared to stop when necessary Safety Tips Slow down early when approaching the sign Check both directions carefully for vehicles Be ready to stop if traffic enters suddenly Proceed only when the intersection is safe and clear Penalties for Ignoring the Sign Ignoring sharp junction warnings may result in: Traffic fines or penalties Increased risk of side-impact or merging collisions Legal consequences in the event of an accident Liability for damage or injury caused Summary The sharp junction sign in South Africa warns drivers of an upcoming angled intersection where traffic may merge unexpectedly. Drivers must slow down, stay alert, and be prepared to yield or stop to ensure safe passage through the junction.

On any road before you reach a place where your road splits in two.

To warn that the road forks into two roads.

Decide well in time which road to take. Look out for approaching traffic whose path you will cross when taking the right hand road.

Overview The Road Layout Signs (South Africa) – Y-Junction Sign are used on public roads to warn drivers that the road ahead will split into two separate routes, forming a “Y” shape. This helps drivers prepare in advance for choosing a direction. What the Sign Means This sign indicates that the road is about to fork into two separate directions. Drivers must decide early which branch of the road to take and prepare for possible cross-traffic, especially when choosing the right-hand branch. The key purpose is: to warn of an upcoming fork in the road where drivers must choose a direction and watch for crossing traffic. How It Works in Practice The main road splits into two separate roads ahead. Drivers must choose either the left or right branch. Taking the right-hand road may involve crossing oncoming traffic. Traffic flow becomes divided at the junction point. Driver Responsibilities Decide in advance which direction to take Signal early before changing direction Watch carefully for approaching or crossing vehicles Proceed only when it is safe to do so Where You Will See This Sign On rural and urban roads where routes divide At temporary road layouts and construction zones Where road design includes forks or split junctions In areas with changing traffic patterns or detours Purpose of the Sign The purpose of the Y-junction sign is to warn drivers that the road ahead splits into two directions, allowing them time to choose their route safely and be aware of possible cross-traffic. Common Mistakes to Avoid Waiting too long to choose a direction Changing lanes or direction at the last moment Failing to check for oncoming traffic when turning right Not signalling before turning Safety Tips Plan your route early when approaching the sign Slow down before reaching the junction Check for vehicles crossing your intended path Indicate clearly before turning left or right Penalties for Ignoring the Sign Ignoring Y-junction warnings may result in: Traffic fines or penalties Increased risk of intersection collisions Accidents due to sudden lane changes Legal liability for damages or injuries caused Summary The Y-junction sign in South Africa warns drivers that the road ahead splits into two directions. Drivers must choose their route early, signal correctly, and remain alert for crossing traffic to ensure safe navigation through the junction.

On any dual roadway.

To warn that the one-way roadway is ending soon and that approaching vehicles will use the same carriageway as you.

Position your vehicle on the road where it will not endanger approaching traffic. It may be necessary to change lanes.

Overview The Road Layout Signs (South Africa) – End of Dual-Roadway Sign are used on dual carriageways to warn drivers that a divided road is ending and the traffic flow will soon become a single carriageway. This means opposing traffic will begin using the same road space. What the Sign Means This sign indicates that the separation between opposing traffic lanes is ending ahead. Drivers will soon share the same roadway with oncoming vehicles, requiring extra caution and possible lane changes. The key purpose is: to warn that a dual carriageway is ending and traffic will merge into a single shared roadway. How It Works in Practice The divided road (with separate directions) is ending. Traffic from both directions will begin sharing the same carriageway. Drivers must adjust position and prepare to merge safely. Lane changes may be required to avoid conflict with oncoming traffic. Driver Responsibilities Reduce speed and prepare for merging traffic conditions Check mirrors and blind spots before changing lanes Position your vehicle safely within the available lane Stay alert for oncoming vehicles entering the same roadway Where You Will See This Sign On highways and dual carriageways At the end of divided road sections Before roadworks or temporary lane reductions Where road design changes from dual to single carriageway Purpose of the Sign The purpose of the end of dual-roadway sign is to alert drivers that the divided road structure is ending, allowing them time to adjust their speed, position, and awareness before sharing the roadway with opposing traffic. Common Mistakes to Avoid Continuing at high speed into a merging section Failing to check for oncoming traffic Not changing lanes early enough Misjudging the narrowing roadway Safety Tips Begin adjusting your lane position early Use mirrors and indicators when changing lanes Slow down gradually before the merge point Watch carefully for vehicles entering from opposite directions Penalties for Ignoring the Sign Ignoring end-of-dual-roadway warnings may result in: Traffic fines or penalties Head-on or side-impact collisions Dangerous lane merging incidents Legal liability for accidents caused Summary The end of dual-roadway sign in South Africa warns drivers that a divided road is ending and traffic will soon share a single carriageway. Drivers must adjust speed and position early, stay alert, and merge safely to avoid conflicts with oncoming traffic.

On any dual roadway.

To warn that the one-way roadway is ending soon and that approaching vehicles will use the same carriageway as you.

Position your vehicle on the road where it will not endanger approaching traffic. It may be necessary to change lanes.

Overview The Road Layout Signs (South Africa) – End of Dual-Roadway Sign are used on dual carriageways to warn drivers that the divided roadway is coming to an end. Traffic that was previously separated will soon share a single carriageway. What the Sign Means This sign indicates that the separation between opposing traffic directions is ending ahead. Vehicles travelling in opposite directions will begin using the same roadway space, increasing the need for caution and lane awareness. The key purpose is: to warn that a dual carriageway is ending and all traffic will merge into a single shared road. How It Works in Practice The divided road section is ending soon. Traffic from both directions will share one carriageway. Drivers must adjust lane position safely. Oncoming vehicles may now be closer and more direct. Driver Responsibilities Reduce speed as you approach the end of the dual roadway Check mirrors and blind spots before changing lanes Position your vehicle safely within the correct lane Stay alert for vehicles merging from the opposite direction Where You Will See This Sign On highways and dual carriageways At the end of divided road sections Before roadworks or lane reductions Where road design transitions from dual to single carriageway Purpose of the Sign The purpose of the end of dual-roadway sign is to warn drivers that a divided road is ending, allowing time to adjust speed, lane position, and awareness before sharing the roadway with opposing traffic. Common Mistakes to Avoid Failing to reduce speed before the merge point Not checking for oncoming vehicles Late or sudden lane changes Misjudging the narrowing of the roadway Safety Tips Start adjusting your position early Use mirrors and indicators before changing lanes Slow down gradually and safely Watch carefully for opposing traffic Penalties for Ignoring the Sign Ignoring end-of-dual-roadway warnings may result in: Traffic fines or penalties Head-on or side-impact collisions Dangerous merging incidents Legal liability for accidents caused Summary The end of dual-roadway sign in South Africa warns that a divided road is ending and traffic will soon share a single carriageway. Drivers must reduce speed, adjust lane position early, and remain alert for oncoming traffic to ensure safe driving conditions.

On any single carriage way road.

To warn that the single carriageway is ending and that you will soon enter a one-way road.

You will be able to overtake more safely after entering the one way road. This sign does not indicate a freeway and intersections can still be found on such a road.

Overview The Road Layout Signs (South Africa) – Beginning of Dual-Roadway Sign are used on single carriageway roads to warn drivers that the road ahead will split into a divided or one-way directional system. This means traffic will soon be separated into different lanes or carriageways for each direction. What the Sign Means This sign indicates that a single carriageway road is ending and transitioning into a dual or divided roadway system, often with improved overtaking opportunities. However, it does not mean the road is a freeway, and intersections may still be present. The key purpose is: to warn that a single carriageway is ending and the road ahead will become a divided or one-way directional roadway. How It Works in Practice The current single carriageway splits into separate directional lanes or roadways. Traffic becomes more organised, often improving overtaking opportunities. Opposing traffic is separated for safety. Intersections and access points may still exist along the route. Driver Responsibilities Prepare to adjust to a divided traffic system Stay in the correct lane for your direction of travel Use overtaking opportunities safely and legally Remain alert for intersections and entering traffic Where You Will See This Sign On rural and urban roads transitioning to dual carriageways Before sections with separated traffic flow At the start of upgraded or expanded road systems On major routes improving traffic capacity and safety Purpose of the Sign The purpose of the beginning of dual-roadway sign is to inform drivers that the road ahead will split into separate directions of travel, improving traffic flow and overtaking opportunities while maintaining awareness of potential intersections. Common Mistakes to Avoid Assuming the road is a freeway with no intersections Ignoring lane discipline after the split Unsafe overtaking without checking conditions Failing to notice upcoming junctions or access points Safety Tips Adjust your driving early as the road splits Stay in your designated lane for your direction Use overtaking lanes only when safe and legal Remain alert for intersections and merging traffic Penalties for Ignoring the Sign Ignoring dual-roadway transition warnings may result in: Traffic fines or penalties Unsafe overtaking incidents Collisions due to incorrect lane usage Legal liability for accidents caused Summary The beginning of dual-roadway sign in South Africa warns that a single carriageway is transitioning into a divided road system. Drivers must adjust lane position, remain alert for intersections, and use overtaking opportunities safely while following proper lane discipline.

On any single carriage way road.

To warn that the single carriageway is ending and that you will soon enter a one-way road.

You will be able to overtake more safely after entering the one way road. This sign does not indicate a freeway and intersections can still be found on such a road.

Overview The Road Layout Signs (South Africa) – Beginning of Dual-Roadway Sign are used on single carriageway roads to warn drivers that the road ahead is changing into a divided system. Traffic will soon be organised into separate directions of travel, improving flow and overtaking opportunities. What the Sign Means This sign indicates that a single carriageway is ending and the road will soon become a one-way directional system or divided roadway. Drivers will be entering a road where traffic is separated by direction, but it is not a freeway. The key purpose is: to warn that a single carriageway is ending and the road ahead will become a divided or one-way traffic system. How It Works in Practice The single carriageway transitions into separated lanes or roadways for each direction. Traffic flow becomes more structured and organised. Overtaking may become safer where conditions allow. Intersections and access points can still occur along the route. Driver Responsibilities Prepare for a change in road layout and traffic flow Stay in the correct lane for your direction of travel Overtake only when it is safe and permitted Remain alert for intersections and entering vehicles Where You Will See This Sign On single carriageway roads upgrading to divided systems On major routes with increasing traffic capacity Before sections with separated directional flow In urban and rural road expansion areas Purpose of the Sign The purpose of the beginning of dual-roadway sign is to inform drivers that the road ahead will split into separate directions of travel, allowing better traffic flow while reminding drivers that intersections may still be present. Common Mistakes to Avoid Assuming the road is a freeway with no intersections Unsafe overtaking without checking conditions Ignoring lane discipline after entering the divided road Failing to watch for junctions and access points Safety Tips Adjust your driving as the road layout changes Stay in the correct lane for your direction Only overtake when it is clearly safe Remain alert for intersections and merging traffic Penalties for Ignoring the Sign Ignoring dual-roadway transition warnings may result in: Traffic fines or penalties Unsafe overtaking incidents Collisions due to incorrect lane usage Legal liability for accidents caused Summary The beginning of dual-roadway sign in South Africa warns drivers that a single carriageway is ending and the road will become a divided system. Drivers must adjust to lane separation, remain alert for intersections, and overtake safely while following proper road discipline.