On any road

To warn that there is a traffic circle ahead where you may need to yield to other traffic.

Slow down so that you can stop or drive around the circle at a safe speed. Look out for road traffic signs and markings which will tell you whether you have the right of way or whether you have to yield. If there is no indication you have to give way to traffic approaching from the right. Vehicles within a traffic circle have right of way. If you have right of way still look out for traffic in the circle which may not yield to you.

Overview The Direction of Movement Signs (South Africa) – Traffic Circle Sign is a warning sign used on public roads to indicate that a roundabout (traffic circle) is ahead. It prepares drivers for a circular traffic flow where vehicles must yield and follow specific right-of-way rules. What the Sign Means This sign warns that you are approaching a traffic circle where vehicles circulate around a central island. Drivers must adjust speed and be ready to yield or merge depending on signage and markings. How It Works in Practice A traffic circle (roundabout) is ahead on the road. Vehicles move in a circular flow around a central island. Right-of-way depends on road signs and markings. If no markings are present, traffic approaching from the right has priority. Vehicles already inside the circle generally have right of way. Driver Responsibilities Slow down when approaching the traffic circle Check for yield or stop signs and road markings Give way to traffic already in the circle unless otherwise indicated Signal clearly before exiting the circle Where You Will See This Sign This sign is commonly found: At intersections with roundabouts or traffic circles In urban and suburban road networks At junctions designed to manage traffic flow without signals Purpose of the Sign The purpose of the traffic circle sign is to warn drivers of an upcoming roundabout, ensuring they reduce speed, understand right-of-way rules, and navigate the circular intersection safely. Common Mistakes to Avoid Entering the circle without checking for traffic Failing to yield when required Not signalling when exiting the circle Approaching the circle at excessive speed Safety Tips Slow down well before entering the traffic circle Observe all yield signs and road markings Watch carefully for vehicles already inside the circle Signal clearly before exiting your chosen road Penalties for Ignoring the Sign Ignoring traffic circle rules may result in: Traffic fines or penalties Collisions at entry or within the circle Legal consequences in the event of an accident Risk of injury to road users Summary The traffic circle sign in South Africa warns drivers of an approaching roundabout where traffic flow is circular. Drivers must slow down, follow right-of-way rules, yield when required, and always stay alert for vehicles already inside the circle.

On any road

To warn that there is a gentle curve ahead to the left or right.

Ensure that you drive at such a speed that you can take the curve safely or stop within the distance that you can see.

Overview The Direction of Movement Signs (South Africa) – Gentle Curve Sign is a warning sign used on public roads to indicate a gradual bend in the road ahead, either to the left or to the right. It helps drivers prepare to adjust speed and steering for safe navigation through the curve. What the Sign Means This sign warns that the road ahead will bend gently in one direction. Although the curve is not sharp, drivers still need to adjust speed and maintain full control of the vehicle. How It Works in Practice The road ahead curves gradually to the left or right. The bend is gentle but still requires steering adjustment. Visibility may be reduced depending on road conditions. Safe speed is required to maintain control throughout the curve. Driver Responsibilities Reduce speed before entering the curve Maintain steady steering through the bend Stay within your lane at all times Be prepared to stop within visible distance if necessary Where You Will See This Sign This sign is commonly found: On rural and suburban roads with gradual bends Before long sweeping curves on highways or secondary roads In areas where visibility may be limited by terrain or vegetation Purpose of the Sign The purpose of the gentle curve sign is to warn drivers of a gradual change in road direction, allowing them to adjust speed and steering early to ensure safe and controlled driving. Common Mistakes to Avoid Entering the curve at high speed Braking suddenly while in the bend Drifting out of lane while steering Ignoring reduced visibility ahead Safety Tips Slow down before reaching the curve Keep both hands firmly on the steering wheel Follow the natural line of the road smoothly Stay alert for unexpected obstacles or slow vehicles Penalties for Ignoring the Sign Ignoring gentle curve warnings may result in: Loss of vehicle control Collisions due to excessive speed Traffic fines for dangerous driving Legal consequences in the event of an accident Summary The gentle curve sign in South Africa warns drivers of a gradual bend in the road ahead. Drivers must reduce speed, maintain control, and steer smoothly to safely navigate the curve while staying within their lane.

On any road

To warn that there is a gentle curve ahead to the left or right.

Ensure that you drive at such a speed that you can take the curve safely or stop within the distance that you can see.

Overview The Direction of Movement Signs (South Africa) – Gentle Curve Sign is a warning sign used on public roads to indicate a gradual bend in the road ahead, either to the left or to the right. It helps drivers prepare for a smooth change in direction by adjusting speed and maintaining proper control of the vehicle. What the Sign Means This sign warns that the road ahead will curve gently in one direction. Although the bend is not sharp, drivers still need to reduce speed and stay alert to ensure safe navigation. How It Works in Practice The road ahead curves gradually to the left or right. The bend requires controlled steering but not abrupt movement. Visibility may be partially limited depending on terrain or surroundings. Safe speed must allow stopping within visible distance if necessary. Driver Responsibilities Slow down before entering the curve Maintain steady and controlled steering Stay within your lane throughout the bend Ensure you can stop within the distance you can see ahead Where You Will See This Sign This sign is commonly found: On rural roads with gradual bends Along highways or secondary roads with sweeping curves In areas where visibility may be reduced by landscape or roadside obstacles Purpose of the Sign The purpose of the gentle curve sign is to warn drivers of a gradual change in road direction, allowing them to reduce speed early and navigate the bend safely while maintaining full control of the vehicle. Common Mistakes to Avoid Driving through the curve at high speed Braking sharply while already in the bend Cutting across lanes during the turn Failing to adjust for reduced visibility Safety Tips Reduce speed before reaching the curve Keep both hands firmly on the steering wheel Follow the natural flow of the road Stay alert for hazards beyond the curve Penalties for Ignoring the Sign Ignoring gentle curve warnings may result in: Loss of vehicle control Collisions due to excessive speed Traffic fines for dangerous or negligent driving Legal consequences in the event of an accident Summary The gentle curve sign in South Africa warns drivers of a gradual bend in the road ahead. Drivers must slow down, maintain control, and ensure they can stop within visible distance to safely navigate the curve.

On any road

To warn that there is a sharp curve ahead to the left or right.

Slow down so that you can take the curve safely or stop within the distance that you can see.

Overview The Direction of Movement Signs (South Africa) – Sharp Curve Sign is a warning sign used on public roads to indicate a sharp bend in the road ahead, either to the left or to the right. It is used to alert drivers to reduce speed significantly and prepare for a sudden change in direction. What the Sign Means This sign warns that the road ahead will curve sharply in one direction. Unlike a gentle curve, a sharp curve requires strong speed reduction and careful steering to avoid losing control. How It Works in Practice The road ahead bends sharply to the left or right. The curve may require significant steering adjustment. Visibility around the bend is often limited. Higher risk of losing control if speed is not reduced. Driver Responsibilities Reduce speed well before entering the curve Maintain firm and controlled steering throughout the bend Stay within your lane at all times Be prepared to stop within the visible distance if needed Where You Will See This Sign This sign is commonly found: On rural roads with tight bends Along mountainous or hilly routes In areas with limited visibility or sudden road changes Purpose of the Sign The purpose of the sharp curve sign is to warn drivers of a sudden change in road direction, allowing them to slow down in advance and safely navigate a high-risk bend in the road. Common Mistakes to Avoid Entering the curve at high speed Braking suddenly while in the curve Drifting across lanes during the turn Underestimating the sharpness of the bend Safety Tips Slow down significantly before reaching the curve Keep both hands firmly on the steering wheel Follow the curve smoothly without sudden movements Stay alert for hazards hidden beyond the bend Penalties for Ignoring the Sign Ignoring sharp curve warnings may result in: Loss of vehicle control Serious collisions due to excessive speed Traffic fines for dangerous driving Legal consequences in the event of an accident Summary The sharp curve sign in South Africa warns drivers of a tight bend ahead in the road. Drivers must slow down significantly, maintain full control, and ensure they can safely navigate or stop within visible distance.

On any road

To warn that there is a sharp curve ahead to the left or right.

Slow down so that you can take the curve safely or stop within the distance that you can see.

Overview The Direction of Movement Signs (South Africa) – Sharp Curve Sign is a warning sign used on public roads to indicate a sharp bend ahead, either to the left or to the right. It alerts drivers to reduce speed significantly and prepare for a sudden change in direction. What the Sign Means This sign warns that the road ahead curves sharply in one direction. Unlike a gentle curve, a sharp curve requires careful control of speed and steering to prevent loss of control. How It Works in Practice The road ahead bends sharply left or right. The curve may require strong steering adjustment. Visibility around the bend may be limited. There is increased risk if speed is not reduced early. Driver Responsibilities Slow down well before entering the curve Maintain full control of steering through the bend Stay within your lane at all times Be prepared to stop within the distance you can see Where You Will See This Sign This sign is commonly found: On rural and mountainous roads Along roads with sudden directional changes In areas with limited visibility or hazardous terrain Purpose of the Sign The purpose of the sharp curve sign is to warn drivers of a sudden and significant change in road direction, allowing them to reduce speed in advance and safely navigate the bend. Common Mistakes to Avoid Entering the curve at high speed Braking suddenly while already in the bend Drifting across lanes during the turn Misjudging the sharpness of the curve Safety Tips Reduce speed early before reaching the curve Hold the steering wheel firmly with both hands Follow the curve smoothly and steadily Stay alert for hidden hazards beyond the bend Penalties for Ignoring the Sign Ignoring sharp curve warnings may result in: Loss of vehicle control Collisions due to excessive speed Traffic fines for dangerous driving Legal consequences in the event of an accident Summary The sharp curve sign in South Africa warns drivers of a sudden bend in the road. Drivers must slow down, maintain control, and ensure they can safely navigate the curve or stop within visible distance.

On any public road especially in mountainous areas.

To warn that there is a very sharp, U-shaped curve ahead to the left or right.

Slow down so that you can take the curve safely or stop within the distance you can see.

Overview The Direction of Movement Signs (South Africa) – Hairpin Bend Sign is a warning sign used on public roads, especially in mountainous or steep terrain. It indicates an extremely sharp U-shaped bend ahead, either to the left or to the right. What the Sign Means This sign warns that the road ahead has a very tight, almost 180-degree curve. Drivers must significantly reduce speed and prepare for a demanding turn that requires careful control of the vehicle. How It Works in Practice The road ahead makes a very sharp U-shaped turn (hairpin bend). The bend may be left or right depending on road layout. Visibility is often limited due to terrain such as mountains or cliffs. Sharp steering and low speed are essential to stay in control. Driver Responsibilities Reduce speed significantly before entering the bend Shift to a lower gear if necessary for control Maintain steady and controlled steering throughout the turn Be prepared to stop within the distance you can see Where You Will See This Sign This sign is commonly found: In mountainous or hilly regions On winding rural roads with steep gradients In areas where roads follow natural terrain contours Purpose of the Sign The purpose of the hairpin bend sign is to warn drivers of an extremely sharp turn ahead, allowing them to slow down in advance and safely navigate dangerous terrain where road conditions change abruptly. Common Mistakes to Avoid Entering the bend at normal road speed Braking suddenly while in the curve Failing to downshift for better vehicle control Underestimating the sharpness of the turn Safety Tips Slow down well before reaching the hairpin bend Use lower gears to maintain control on steep roads Steer smoothly and avoid sudden movements Stay alert for oncoming vehicles on narrow sections Penalties for Ignoring the Sign Ignoring a hairpin bend warning may result in: Loss of vehicle control or skidding Severe collisions on narrow or steep roads Traffic fines for dangerous driving Serious injury or legal consequences in an accident Summary The hairpin bend sign in South Africa warns drivers of an extremely sharp U-shaped curve ahead, often in mountainous areas. Drivers must slow down significantly, maintain full control, and navigate the bend carefully to ensure safe passage.

On any public road especially in mountainous areas.

To warn that there is a very sharp, U-shaped curve ahead to the left or right.

Slow down so that you can take the curve safely or stop within the distance you can see.

Overview The Direction of Movement Signs (South Africa) – Hairpin Bend Sign is a warning sign used on public roads, especially in mountainous or steep terrain. It alerts drivers to an extremely sharp U-shaped bend ahead, either to the left or right. What the Sign Means This sign indicates that the road ahead contains a very tight hairpin (U-shaped) curve. Drivers must significantly reduce speed and prepare for a sharp change in direction that requires full control of the vehicle. How It Works in Practice The road ahead bends sharply back on itself (U-shaped turn). The curve may turn left or right depending on the terrain. Visibility is often limited, especially in mountainous areas. Careful steering and low speed are essential for safe passage. Driver Responsibilities Slow down significantly before entering the bend Maintain full control of steering throughout the turn Use a safe gear to maintain stability if required Be prepared to stop within the distance you can see Where You Will See This Sign This sign is commonly found: In mountainous and hilly regions On steep, winding rural roads In areas where roads follow natural terrain contours Purpose of the Sign The purpose of the hairpin bend sign is to warn drivers of an extremely sharp U-turn ahead, allowing them to reduce speed early and safely navigate dangerous road conditions where visibility and space are limited. Common Mistakes to Avoid Entering the bend at normal driving speed Braking suddenly while already in the curve Misjudging the severity of the turn Failing to maintain lane discipline in narrow sections Safety Tips Slow down well in advance of the bend Use lower gears for better control on steep roads Steer smoothly without sudden movements Watch for oncoming vehicles on narrow roads Penalties for Ignoring the Sign Ignoring a hairpin bend warning may result in: Loss of vehicle control or skidding Serious collisions on narrow or steep roads Traffic fines for dangerous driving Severe injury or legal consequences in accidents Summary The hairpin bend sign in South Africa warns drivers of a very sharp U-shaped curve ahead, typically in mountainous areas. Drivers must slow down significantly, maintain full control, and carefully navigate the bend to ensure safe travel.

On any public road especially in mountainous areas.

To warn of a series of curves ahead to the right.

Overview The Direction of Movement Signs (South Africa) – Winding Road Sign is a warning sign used on public roads, especially in mountainous or rural areas. It indicates that the road ahead contains a series of curves, typically continuing in the same general direction, such as to the right. What the Sign Means This sign warns drivers that they will encounter multiple bends in the road ahead rather than a single curve. In this case, the bends generally continue in a rightward direction, requiring continuous attention and speed control. How It Works in Practice The road ahead has a series of successive curves. The bends typically follow one direction (e.g., to the right). Visibility may be reduced due to terrain or repeated bends. Drivers must continuously adjust steering and speed. Driver Responsibilities Reduce speed before entering the winding section Maintain steady and controlled steering throughout Stay fully within your lane at all times Remain alert for oncoming traffic and road conditions Where You Will See This Sign This sign is commonly found: In mountainous or hilly regions On rural roads with natural terrain curves Along scenic routes or winding passes Purpose of the Sign The purpose of the winding road sign is to warn drivers of multiple upcoming curves, allowing them to reduce speed early and prepare for continuous steering adjustments to safely navigate the road. Common Mistakes to Avoid Driving at normal speed through multiple curves Braking suddenly in the middle of bends Underestimating the number of successive curves Drifting out of lane during continuous turns Safety Tips Slow down well before entering the winding road Keep both hands firmly on the steering wheel Maintain a consistent, controlled speed Stay alert for hidden hazards between curves Penalties for Ignoring the Sign Ignoring winding road warnings may result in: Loss of vehicle control Collisions due to excessive speed Traffic fines for dangerous driving Serious injury in road accidents Summary The winding road sign in South Africa warns drivers of a series of curves ahead, typically in mountainous or rural areas. Drivers must slow down, maintain control, and continuously adjust steering to safely navigate the road.

On any public road especially in mountainous areas.

To warn of a series of curves ahead to the left.

Overview The Direction of Movement Signs (South Africa) – Winding Road Sign is a warning sign used on public roads, especially in mountainous or rural areas. It indicates that the road ahead contains a series of curves, generally continuing in a leftward direction. What the Sign Means This sign warns drivers that they will encounter multiple bends in succession rather than a single curve. In this case, the bends generally follow a leftward direction, requiring continuous attention and controlled driving. How It Works in Practice The road ahead contains a series of continuous curves. The bends generally follow a leftward direction. Visibility may be reduced due to terrain or repeated turns. Drivers must continuously adjust steering and speed. Driver Responsibilities Reduce speed before entering the winding section Maintain steady and controlled steering throughout Stay fully within your lane at all times Remain alert for oncoming traffic and changing road conditions Where You Will See This Sign This sign is commonly found: In mountainous or hilly regions On rural roads with natural terrain curves Along scenic routes with repeated bends Purpose of the Sign The purpose of the winding road sign is to warn drivers of multiple upcoming left-hand curves, allowing them to reduce speed early and prepare for continuous steering adjustments to safely navigate the road. Common Mistakes to Avoid Driving at normal speed through multiple bends Braking suddenly while in a curve Underestimating the number of successive turns Drifting out of lane during continuous curves Safety Tips Slow down well before entering the winding road Keep both hands firmly on the steering wheel Maintain a consistent and controlled speed Stay alert for hidden hazards between curves Penalties for Ignoring the Sign Ignoring winding road warnings may result in: Loss of vehicle control Collisions due to excessive speed Traffic fines for dangerous driving Serious injury in road accidents Summary The winding road sign in South Africa warns drivers of a series of left-hand curves ahead, often in mountainous or rural areas. Drivers must slow down, maintain control, and continuously adjust steering to safely navigate the road.

On any public road especially in mountainous areas.

To warn that there are two sharp curves ahead in opposite directions. W210 indicates the first curve is to the right and W211 that the first curve is to the left.

Slow down enough to be able to round the curves safely or stop within the sight distance you can see.

Overview The Direction of Movement Signs (South Africa) – Combined Curves Sign are used on public roads, especially in mountainous or winding areas, to warn drivers of two consecutive sharp curves in opposite directions. These signs are identified as W210 and W211 depending on the direction of the first curve. What the Sign Means This sign indicates that the road ahead contains two sharp bends in succession, changing direction from one curve to the opposite. W210 indicates the first curve is to the right, while W211 indicates the first curve is to the left. The key purpose is: to warn of two sharp curves in opposite directions ahead and require drivers to slow down to safely navigate or stop within visible distance. How It Works in Practice The road first curves sharply in one direction, then quickly in the opposite direction. Drivers must continuously adjust steering through both bends. Visibility may be limited between and around the curves. Speed control is essential to maintain vehicle stability. Driver Responsibilities Reduce speed well before entering the first curve Maintain smooth and controlled steering through both bends Stay within your lane at all times Be prepared to stop if hazards appear within sight distance Where You Will See This Sign In mountainous and hilly regions On rural roads with sharp directional changes Along winding scenic routes In areas with limited visibility and tight road geometry Purpose of the Sign The purpose of the combined curves sign is to warn drivers of two sharp, opposite-direction bends ahead so they can reduce speed in advance and safely maintain control of their vehicle through both curves. Common Mistakes to Avoid Approaching the curves at high speed Failing to adjust for the second curve after the first Braking suddenly during the bends Drifting across lanes due to poor control Safety Tips Slow down significantly before entering the first curve Steer smoothly through both bends without sudden movements Maintain full lane discipline throughout Drive at a speed that allows safe stopping if needed Penalties for Ignoring the Sign Ignoring combined curve warnings may result in: Loss of vehicle control Serious accidents such as rollovers or road departures Traffic fines for negligent or reckless driving Injury to passengers or other road users Summary The combined curves sign in South Africa warns drivers of two sharp bends in opposite directions, with the first being either left or right depending on the sign type. Drivers must reduce speed, maintain careful control, and proceed cautiously to safely navigate both curves within visible distance.

On any public road especially in mountainous areas.

To warn that there are two sharp curves ahead in opposite directions. W210 indicates the first curve is to the right and W211 that the first curve is to the left.

Slow down enough to be able to round the curves safely or stop within the sight distance you can see.

Overview The Direction of Movement Signs (South Africa) – Combined Curves Sign are used on public roads, especially in mountainous or winding areas, to warn drivers of two sharp curves ahead in opposite directions. These signs help drivers prepare for rapid changes in direction and reduced visibility. What the Sign Means This sign indicates that the road ahead contains two consecutive sharp bends that go in opposite directions. W210 shows that the first curve is to the right, while W211 shows that the first curve is to the left. The key purpose is: to warn of two sharp opposite-direction curves ahead and require drivers to slow down so they can safely navigate or stop within sight distance. How It Works in Practice The road bends sharply in one direction, then immediately in the opposite direction. Drivers must adjust steering twice in quick succession. Visibility may be limited between and around the curves. Speed control is critical to maintain stability and control. Driver Responsibilities Slow down well before entering the first curve Maintain smooth and controlled steering through both bends Stay within your lane at all times Be prepared to stop if hazards appear within sight distance Where You Will See This Sign In mountainous and hilly regions On rural roads with sharp directional changes Along winding scenic routes In areas with limited visibility and tight road curves Purpose of the Sign The purpose of the combined curves sign is to warn drivers of two sharp, opposite-direction bends ahead so they can reduce speed in advance and safely maintain control of their vehicle through both curves. Common Mistakes to Avoid Approaching the curves at excessive speed Failing to prepare for the second curve after the first Braking suddenly during the bends Drifting across lanes due to poor control Safety Tips Slow down significantly before the first curve Steer smoothly through both bends Maintain full lane discipline throughout Drive at a speed that allows safe stopping if necessary Penalties for Ignoring the Sign Ignoring combined curve warnings may result in: Loss of vehicle control Serious accidents such as rollovers or road departures Traffic fines for negligent or reckless driving Injury to passengers or other road users Summary The combined curves sign in South Africa warns drivers of two sharp bends in opposite directions, with the first being either left or right depending on the variant. Drivers must slow down, stay alert, and maintain careful control to safely navigate both curves within visible distance.

On any one-way road.

To warn that the one-way roadway you are travelling on will soon become a two-way roadway.

Be aware that you are entering a roadway with two-way traffic and have to be more careful when overtaking to allow for oncoming vehicles.

Overview The Direction of Movement Signs (South Africa) – Two-Way Traffic Sign are used on roads that are currently one-way to warn drivers that the road ahead will soon change into a two-way roadway. This is an important transition warning that helps prevent head-on collisions. What the Sign Means This sign indicates that the one-way road you are travelling on is ending and will become a road with traffic flowing in both directions. Drivers must be prepared for oncoming vehicles and adjust their driving behaviour accordingly. The key purpose is: to warn that a one-way road is becoming a two-way road and require drivers to be cautious of oncoming traffic, especially when overtaking. How It Works in Practice The road changes from one-way to two-way traffic flow. Oncoming vehicles will soon be present in the opposite lane. Road markings and signs may indicate lane separation. Overtaking becomes more dangerous and must be done with caution. Driver Responsibilities Reduce speed when approaching the transition area Stay alert for oncoming traffic Prepare to adjust lane position if necessary Avoid overtaking unless it is clearly safe and legal Where You Will See This Sign At the end of one-way streets Near intersections where road direction changes In urban areas with changing traffic flow systems Before road design transitions from one-way to two-way traffic Purpose of the Sign The purpose of the two-way traffic sign is to warn drivers that the road ahead will no longer be one-way, helping them prepare for oncoming traffic and reduce the risk of head-on collisions or unsafe overtaking. Common Mistakes to Avoid Continuing to drive as if the road is still one-way Unsafe overtaking near the transition point Failing to anticipate oncoming vehicles Ignoring road markings indicating the change Safety Tips Slow down as you approach the sign Check for vehicles that may be approaching from the opposite direction Stay in your lane and avoid unnecessary overtaking Follow all road markings and signage carefully Penalties for Ignoring the Sign Ignoring the two-way traffic warning may result in: Head-on collisions with oncoming vehicles Traffic fines for reckless driving or unsafe overtaking Serious injury or fatalities Legal liability for damages caused Summary The two-way traffic sign in South Africa warns drivers that a one-way road is ending and will become a two-way roadway. Drivers must reduce speed, stay alert, and be prepared for oncoming traffic to ensure safe driving.

In urban areas.

To warn that one-way street you are driving on will soon be crossed by a street that carries two-way traffic.

If you are driving in the left hand lane and want to turn to the right at the first intersection, change to the right hand lane in good time. If you are driving in the right hand lane and wish to turn to the left at the first intersection, change to the left hand lane in good time.

Overview The Direction of Movement Signs (South Africa) – Two-Way Traffic Crossroad Sign are used in urban areas to warn drivers that a one-way street they are travelling on will soon be crossed by a road carrying two-way traffic. This creates a potential conflict point at the intersection that requires early lane preparation. What the Sign Means This sign indicates that the one-way road you are driving on will soon intersect with a cross street where vehicles travel in both directions. Drivers must prepare for crossing traffic that may come from either side. The key purpose is: to warn of an upcoming intersection with a two-way road and require drivers to position themselves in the correct lane in advance. How It Works in Practice You are driving on a one-way street. A cross street ahead carries traffic in both directions. Turning movements must be planned early due to lane positioning. Incorrect lane choice may prevent safe turning at the intersection. Driver Responsibilities If you plan to turn right, move into the right-hand lane early If you plan to turn left, move into the left-hand lane early Watch for vehicles crossing the intersection from both directions Follow all lane markings and road signs carefully Where You Will See This Sign In urban areas with one-way street systems Near busy intersections in city centres Where road layouts frequently change direction Before intersections with high traffic complexity Purpose of the Sign The purpose of the two-way traffic crossroad sign is to prepare drivers for an upcoming intersection where cross traffic flows in both directions, allowing them to select the correct lane in advance and reduce the risk of last-minute lane changes or collisions. Common Mistakes to Avoid Staying in the wrong lane before the intersection Making sudden lane changes near the junction Failing to check for cross traffic from both directions Ignoring road markings and directional arrows Safety Tips Plan your turn well in advance Move into the correct lane early and safely Slow down when approaching the intersection Check carefully for vehicles from both directions Penalties for Ignoring the Sign Ignoring lane positioning warnings may result in: Unsafe lane changes causing collisions Traffic fines for improper lane use Obstruction of intersection traffic flow Increased risk of accidents at busy junctions Summary The two-way traffic crossroad sign in South Africa warns drivers that a one-way street will intersect with a two-way road ahead. Drivers must position themselves in the correct lane early, follow markings, and remain alert to crossing traffic to ensure safe turning and passage.

On any road with more than one traffic lane in the direction you are travelling.

To warn that the double-lane road you are driving on narrows by a full lane from the left (W215 or TW215) or from the right-hand side.

Depending on which sign is displayed, change in good time to the lane that carries on.

Overview The Direction of Movement Signs (South Africa) – Lane Ends Sign are used on multi-lane roads to warn drivers that the road ahead will narrow and one lane will end. This requires drivers to merge safely into the remaining lane in good time. What the Sign Means This sign indicates that a dual-lane roadway in your direction of travel will soon reduce by one lane, either from the left side (W215 or TW215) or from the right side depending on the sign displayed. Drivers must prepare to merge into the continuing lane. The key purpose is: to warn that a lane is ending ahead and require drivers to merge safely into the remaining lane in advance. How It Works in Practice A multi-lane road reduces to fewer lanes ahead. One lane will physically end from either the left or right side. Vehicles must merge into the continuing lane. Late merging increases congestion and collision risk. Driver Responsibilities Identify early which lane is ending Merge into the continuing lane well in advance Check mirrors and blind spots before changing lanes Yield appropriately when merging into traffic Where You Will See This Sign On highways reducing from two lanes to one Near roadworks and temporary lane closures At bridges, tunnels, or narrowed road sections In urban roads transitioning to narrower layouts Purpose of the Sign The purpose of the lane ends sign is to warn drivers of an upcoming reduction in road width so they can merge safely, maintain traffic flow, and prevent sudden lane changes that may lead to collisions. Common Mistakes to Avoid Waiting until the last moment to merge Forcing entry into the continuing lane Failing to check blind spots before changing lanes Ignoring lane closure warnings Safety Tips Merge early and smoothly into the open lane Maintain a safe following distance Use indicators before changing lanes Be courteous to other drivers during merging Penalties for Ignoring the Sign Ignoring lane ends warnings may result in: Traffic congestion and dangerous bottlenecks Collisions due to forced merging Traffic fines for unsafe lane changes Increased risk of multi-vehicle accidents Summary The lane ends sign in South Africa warns drivers that a multi-lane road is narrowing and one lane will end. Drivers must merge early, check surroundings carefully, and adjust safely to maintain smooth and safe traffic flow.

On any road with more than one traffic lane in the direction you are travelling.

To warn that the double-lane road you are driving on narrows by a full lane from the left (W215 or TW215) or from the right-hand side.

Depending on which sign is displayed, change in good time to the lane that carries on.

Overview The Direction of Movement Signs (South Africa) – Lane Ends Sign are used on roads with multiple lanes in the same direction to warn drivers that the roadway will soon narrow and one lane will end. This requires early and safe merging into the remaining lane. What the Sign Means This sign indicates that a dual-lane road you are travelling on will reduce by one full lane ahead, either from the left side (W215 or TW215) or from the right side, depending on the sign displayed. Drivers must move into the continuing lane in good time. The key purpose is: to warn that a lane is ending ahead and require drivers to merge early and safely into the lane that continues. How It Works in Practice The road narrows from two lanes to one (or more to fewer lanes). One lane physically ends on either the left or right side. Vehicles must merge into the lane that continues ahead. Late merging can cause congestion and collisions. Driver Responsibilities Identify early which lane is ending Merge into the continuing lane in good time Check mirrors and blind spots before changing lanes Yield appropriately when merging into traffic Where You Will See This Sign On highways reducing from two lanes to one At roadworks and temporary lane closures Near bridges, tunnels, or narrowed sections of road In urban areas where road width changes Purpose of the Sign The purpose of the lane ends sign is to give drivers early warning that the road ahead is narrowing so they can merge smoothly, maintain traffic flow, and avoid sudden lane changes that could cause accidents. Common Mistakes to Avoid Waiting until the last moment to merge Forcing into the continuing lane without space Failing to check blind spots before changing lanes Ignoring lane reduction warnings Safety Tips Merge early and smoothly into the open lane Maintain a safe following distance Use indicators before changing lanes Be patient and courteous with other drivers Penalties for Ignoring the Sign Ignoring lane end warnings may result in: Traffic congestion and dangerous bottlenecks Collisions caused by forced merging Traffic fines for unsafe lane changes Increased risk of multi-vehicle accidents Summary The lane ends sign in South Africa warns drivers that a multi-lane road is narrowing and one lane will end. Drivers must merge early, check surroundings carefully, and move safely into the continuing lane to maintain smooth traffic flow and prevent accidents.

On any road

To warn that one or more concealed driveways enter the road you are driving on from the left or right in such a way that you cannot easily see the road or traffic travelling on that road.

Slow down so that you can stop or yield if there is cross traffic that do not yield at the intersection. Remember that a driver of such a vehicle that joins your road from the concealed driveway sometimes finds it also difficult to see you.

Overview The Direction of Movement Signs (South Africa) – Concealed Driveway Sign are used on public roads to warn drivers that there is one or more hidden driveways entering the roadway from either the left or right. These driveways may have limited visibility, making it difficult for drivers to see entering or approaching vehicles. What the Sign Means This sign indicates that concealed or obstructed driveways join the road ahead, where vehicles may enter unexpectedly from the left or right. Both approaching and entering drivers may have restricted visibility. The key purpose is: to warn of concealed driveways ahead and require drivers to slow down and be prepared to stop or yield to merging traffic. How It Works in Practice Driveways or access roads join the main road with limited visibility. Vehicles may enter the road without full sight of oncoming traffic. Drivers on the main road may also not see entering vehicles in time. Extra caution is required due to unpredictable movements. Driver Responsibilities Reduce speed when approaching the area Stay alert for vehicles emerging from driveways Be prepared to stop or yield if necessary Watch both sides of the road carefully Where You Will See This Sign On rural roads with farm or property access points Along suburban roads with hidden entrances Near bends, hills, or vegetation that blocks visibility In areas with multiple private or service driveways Purpose of the Sign The purpose of the concealed driveway sign is to warn drivers of hidden entry points along the road so they can reduce speed and remain alert for vehicles that may enter or exit unexpectedly. Common Mistakes to Avoid Driving at normal speed without caution Assuming no vehicles will emerge from driveways Failing to reduce speed in low-visibility areas Not scanning both sides of the road Safety Tips Slow down well before reaching concealed driveways Be prepared to stop suddenly if a vehicle emerges Use extra caution in areas with trees or walls Assume limited visibility for all road users Penalties for Ignoring the Sign Ignoring concealed driveway warnings may result in: Collisions with vehicles entering or exiting driveways Failure to yield violations Traffic fines for negligent driving Serious injury or property damage Summary The concealed driveway sign in South Africa warns drivers of hidden entrances joining the road ahead. Drivers must slow down, stay alert, and be prepared to stop or yield due to limited visibility and unpredictable vehicle movements.

On any road

To warn that one or more concealed driveways enter the road you are driving on from the left or right in such a way that you cannot easily see the road or traffic travelling on that road.

Slow down so that you can stop or yield if there is cross traffic that do not yield at the intersection. Remember that a driver of such a vehicle that joins your road from the concealed driveway sometimes finds it also difficult to see you.

Overview The Direction of Movement Signs (South Africa) – Concealed Driveway Sign are used on public roads to warn drivers that one or more hidden driveways join the road ahead from the left or right. These driveways may be difficult to see due to obstacles such as vegetation, walls, or road layout. What the Sign Means This sign indicates that concealed driveways enter the roadway ahead, where visibility is limited for both main-road traffic and vehicles emerging from the driveway. Drivers must expect sudden vehicle movements from these hidden access points. The key purpose is: to warn of concealed driveways ahead and require drivers to slow down and be ready to stop or yield to traffic entering the road. How It Works in Practice Driveways join the main road from the left or right with limited visibility. Vehicles entering the road may not clearly see oncoming traffic. Main-road drivers may also have reduced sight of emerging vehicles. Unexpected entry or crossing movements may occur. Driver Responsibilities Slow down when approaching concealed driveway areas Stay alert for vehicles entering the roadway Be prepared to stop or yield if necessary Scan both sides of the road continuously Where You Will See This Sign On rural roads with hidden property entrances In suburban areas with obstructed driveways Near bends, hills, or dense vegetation Where multiple private access points exist Purpose of the Sign The purpose of the concealed driveway sign is to alert drivers to hidden entry points along the road so they can reduce speed and remain prepared for vehicles entering or exiting unexpectedly due to poor visibility. Common Mistakes to Avoid Maintaining normal speed in low-visibility areas Assuming no vehicles will enter from driveways Not scanning both sides of the road Failing to slow down near obstructed entrances Safety Tips Reduce speed well before reaching concealed driveways Watch carefully for emerging vehicles Be ready to stop at short notice Drive defensively in areas with limited visibility Penalties for Ignoring the Sign Ignoring concealed driveway warnings may result in: Collisions with entering or exiting vehicles Failure to yield violations Traffic fines for negligent driving Serious injury or property damage Summary The concealed driveway sign in South Africa warns drivers of hidden road entrances ahead with limited visibility. Drivers must slow down, stay alert, and be prepared to stop or yield to unexpected vehicle movements from these driveways.

On any road

To warn that one or more concealed driveways enter the road you are driving on from the left or right in such a way that you cannot easily see the road or traffic travelling on that road.

Slow down so that you can stop or yield if there is cross traffic that do not yield at the intersection. Remember that a driver of such a vehicle that joins your road from the concealed driveway sometimes finds it also difficult to see you.

Overview The Direction of Movement Signs (South Africa) – Concealed Driveway Sign are used on public roads to warn drivers that one or more hidden driveways join the road ahead from either the left or right side. These access points are often obscured by buildings, vegetation, walls, or road layout. What the Sign Means This sign indicates that concealed driveways enter the roadway ahead, where visibility is restricted for both main-road traffic and vehicles exiting those driveways. Drivers should expect vehicles to emerge unexpectedly due to limited sight distance. The key purpose is: to warn of concealed driveways ahead and require drivers to slow down and be prepared to stop or yield to crossing or merging traffic. How It Works in Practice Driveways enter the main road from hidden or obstructed positions. Visibility is limited for both entering and approaching vehicles. Vehicles may merge or cross the road unexpectedly. Drivers must anticipate sudden movements from side access points. Driver Responsibilities Reduce speed when approaching concealed driveway areas Be prepared to stop or yield if necessary Continuously scan both sides of the road Drive defensively in low-visibility zones Where You Will See This Sign On rural roads with hidden property entrances In suburban areas with obstructed driveways Near bends, hills, or dense roadside vegetation Where multiple private or service driveways exist Purpose of the Sign The purpose of the concealed driveway sign is to warn drivers of hidden entry points along the road so they can reduce speed and remain alert for vehicles that may enter or exit unexpectedly due to poor visibility conditions. Common Mistakes to Avoid Driving at normal speed through low-visibility areas Assuming no vehicles will emerge from driveways Failing to check both sides of the road Ignoring warning signs in obstructed areas Safety Tips Slow down well in advance of concealed driveways Be ready to stop suddenly if needed Watch carefully for vehicles entering the road Drive cautiously in areas with limited visibility Penalties for Ignoring the Sign Ignoring concealed driveway warnings may result in: Collisions with vehicles entering or exiting driveways Failure to yield violations Traffic fines for negligent driving Serious injury or property damage Summary The concealed driveway sign in South Africa warns drivers of hidden road entrances ahead where visibility is limited. Drivers must slow down, remain alert, and be prepared to stop or yield to unexpected vehicle movements from these concealed access points.