On any road before a railway crossings between the warning sign and the railway crossing.

To warn that there is a railway crossing ahead.

Slow down and if necessary, stop before the crossing.

Overview The Warning Markings (South Africa) – Railway Crossing Marking is a road surface marking used to alert drivers that a railway level crossing is approaching. What the Marking Means This marking serves as an additional warning that a railway crossing is ahead, reinforcing the railway warning sign. It reminds drivers to reduce speed and prepare to stop if a train is approaching. How It Works in Practice Appears on the road surface before railway crossings. Works together with railway warning signs and signals. Gives drivers extra time to react before reaching the tracks. Improves safety at high-risk crossing points. Driver Responsibilities Slow down when approaching the railway crossing area Be prepared to stop if a train is approaching Look both left and right for oncoming trains Never attempt to cross if warning signals are active Where You Will See This Marking This marking is commonly found: On roads approaching railway level crossings Between warning signs and the actual tracks In rural and urban areas near rail lines At both controlled and uncontrolled railway crossings Purpose of the Marking The purpose of the railway crossing warning marking is to increase driver awareness and reduce the risk of collisions between road vehicles and trains by providing early visual warning on the road surface. Common Mistakes to Avoid Ignoring road markings and approaching too fast Attempting to cross when a train is visible or approaching Stopping on the railway tracks Not checking both directions before crossing Safety Tips Always slow down well before the crossing Look and listen carefully for approaching trains Stop if visibility is poor or signals indicate danger Cross only when it is completely safe to do so Penalties for Ignoring the Marking Ignoring railway crossing markings may result in: Traffic fines or prosecution Severe collisions with trains Risk of serious injury or fatalities Legal consequences for reckless driving Summary The railway crossing warning marking in South Africa alerts drivers to an approaching railway level crossing. Drivers must slow down, stay alert, and be prepared to stop to ensure safe crossing conditions.

On any road.

To warn you that there is a break (intersection or off ramp) in the continuing part of the roadway and to inform you that if you are in a lane that has a line on one side, that lane will soon turn off from the road which you are now travelling.

Yield to any traffic that wants to change lanes. The continuity lines will soon change to a channelizing line or painted island, which will make it illegal to change direction. Check your blind spot to make sure there are no other vehicles that might cut in front of you.

Overview The Warning Markings (South Africa) – Continuity Line Marking are road surface markings used to alert drivers to upcoming changes in the roadway layout, such as exits, lane splits, or intersections. What the Marking Means A continuity line indicates that the current lane is either continuing as part of the main route or beginning to diverge toward an off-ramp or separate roadway. It warns drivers that lane behaviour will soon change. The key purpose is: to warn drivers of an upcoming split or exit and guide safe lane selection before lane restrictions apply. How It Works in Practice The line helps distinguish between through lanes and exit or diverging lanes. Drivers are alerted that their lane may split or leave the main carriageway. Lane changes become restricted as markings transition into solid channelisation or painted islands. Safe lane selection must happen before restrictions begin. Driver Responsibilities Pay attention to continuity lines well in advance Choose the correct lane early based on your intended route Yield to vehicles already established in adjacent lanes when changing Check blind spots before merging or changing lanes Where You Will See This Marking Approaches to freeway exits and off-ramps Lane splits on major highways Complex urban interchanges Road sections transitioning into channelised intersections Purpose of the Marking Continuity line markings improve safety and traffic flow by giving drivers early warning of lane divergence, reducing sudden lane changes and confusion near exits or intersections. Common Mistakes to Avoid Waiting too long before choosing the correct lane Forcing a lane change over solid or channelised markings Ignoring vehicles merging from continuity lanes Failing to check blind spots during lane adjustments Safety Tips Read road markings early when approaching exits Do not make sudden lane changes near split points Expect vehicles to merge from adjacent lanes Reduce speed slightly when approaching complex lane layouts Penalties for Ignoring the Marking Misuse of lanes around continuity markings may result in: Traffic fines for unsafe or illegal lane changes Collisions at lane split or merge points Charges for reckless driving Obstruction of traffic flow in channelised areas Summary Continuity line markings in South Africa warn drivers of upcoming lane splits or exits and guide safe lane selection before restrictions apply. Drivers must plan ahead and avoid late or unsafe lane changes.

On any road.

To warn you that there is a break (intersection or off ramp) in the continuing part of the roadway and to inform you that if you are in a lane that has a line on one side, that lane will soon turn off from the road which you are now travelling.

Yield to any traffic that wants to change lanes. The continuity lines will soon change to a channelizing line or painted island, which will make it illegal to change direction. Check your blind spot to make sure there are no other vehicles that might cut in front of you.

Overview The Warning Markings (South Africa) – Continuity Line Marking is a road surface marking used to warn drivers that a lane is about to diverge or exit from the main carriageway. What the Marking Means This marking alerts drivers that the lane they are travelling in will soon separate from the main road, such as at an off-ramp or intersection. It also indicates that lane changes may soon become restricted or prohibited. How It Works in Practice Appears where lanes begin to split or exit the main road. Warns of upcoming off-ramps or diverging routes. Indicates that a lane may soon become a dedicated turning or exit lane. Often transitions into channelizing lines or painted islands. Driver Responsibilities Pay close attention to lane markings and road signs Decide early whether you need to stay on the main road or exit Yield to vehicles already in the correct lane when changing lanes Check blind spots before attempting any lane change Where You Will See This Marking This marking is commonly found: Near freeway off-ramps and exits At major intersections and interchanges Where lanes split into different directions On multi-lane highways approaching junctions Purpose of the Marking The purpose of the continuity line marking is to provide early warning that a lane is about to diverge or end, helping drivers make safe lane decisions and reducing sudden or unsafe lane changes. Common Mistakes to Avoid Waiting too long before changing lanes Forcing entry into another lane at the last moment Ignoring vehicles already positioned in the exit lane Failing to check blind spots before merging Safety Tips Plan your route early before reaching split lanes Slow down and stay alert in merging areas Maintain safe following distance Follow all lane guidance markings carefully Penalties and Risks for Ignoring the Marking Ignoring continuity line markings may result in: Unsafe lane changes and traffic fines Collisions due to sudden merging or cutting in Driving in a lane that leads to a different route unintentionally Increased risk of accidents at exits and interchanges Summary The continuity line marking in South Africa warns drivers that a lane is about to diverge or exit the main roadway. Drivers must plan early, check blind spots, and change lanes safely to avoid conflicts and ensure smooth traffic flow.

On any road.

To warn you that there is a break (intersection or off ramp) in the continuing part of the roadway and to inform you that if you are in a lane that has a line on one side, that lane will soon turn off from the road which you are now travelling.

Yield to any traffic that wants to change lanes. The continuity lines will soon change to a channelizing line or painted island, which will make it illegal to change direction. Check your blind spot to make sure there are no other vehicles that might cut in front of you.

Overview The Warning Markings (South Africa) – Continuity Line Marking are road surface markings that alert drivers to an upcoming change in the roadway, such as a lane split, off-ramp, or intersection. What the Marking Means A continuity line warns that the lane you are currently travelling in may either continue or soon diverge from the main carriageway. It also indicates that lane changes will soon become restricted as the road layout changes. The key purpose is: to warn drivers early of lane divergence or roadway breaks and help them choose the correct lane before restrictions apply. How It Works in Practice The lane may appear to continue or split ahead of an intersection or off-ramp. Drivers in lanes bordered by continuity lines must prepare for a possible exit or divergence. Continuity lines transition into solid channelising lines or painted islands where lane changes are no longer allowed. Other vehicles may merge or diverge in the same area, increasing interaction between lanes. Driver Responsibilities Select your lane early before reaching the continuity section Yield to vehicles that are legally changing or merging lanes Avoid crossing into channelised or restricted areas once formed Check mirrors and blind spots before any lane adjustment Where You Will See This Marking Freeway exits and off-ramps Lane splits on highways Approaches to intersections with complex lane layouts Urban interchanges with merging or diverging traffic Purpose of the Marking Continuity line markings improve road safety by giving drivers early warning of lane changes or splits, helping prevent sudden lane changes and reducing collision risk near exits and junctions. Common Mistakes to Avoid Delaying lane choice until the split point Crossing into restricted channelised areas Failing to yield during merging situations Ignoring blind spot checks when changing lanes Safety Tips Observe lane markings well in advance of junctions Do not make last-minute lane changes Expect merging traffic in continuity zones Drive defensively in areas where lanes diverge Penalties for Ignoring the Marking Failure to follow continuity line rules may result in: Fines for unsafe or illegal lane changes Collisions at merge or split points Charges for reckless or negligent driving Obstruction of properly channelised traffic flow Summary Continuity line markings in South Africa warn drivers of upcoming lane splits or roadway changes. They require early lane selection and careful merging to ensure safe and orderly traffic movement.

On any road with two-way traffic.

To warn that vehicles on the other side of the road marking are moving in the opposite direction.

Be on the look out for approaching vehicles which may move over onto your side of the road.

Overview The Warning Markings (South Africa) – Dividing Line Marking is a road surface marking used on two-way roads to separate traffic travelling in opposite directions. What the Marking Means This marking warns drivers that vehicles on the other side of the line are travelling in the opposite direction. It helps maintain safe separation between opposing traffic flows. How It Works in Practice Divides a road into lanes for opposite directions of travel. Helps prevent head-on collisions. Indicates the boundary between your lane and oncoming traffic. May be solid or broken depending on overtaking rules. Driver Responsibilities Stay within your lane at all times Be alert for vehicles crossing the dividing line Do not overtake where it is unsafe or prohibited Adjust speed according to road and traffic conditions Where You Will See This Marking This marking is commonly found: On rural and urban two-way roads On highways and main roads In areas with moderate to heavy traffic flow On roads with limited physical separation between directions Purpose of the Marking The purpose of the dividing line marking is to separate opposing traffic streams and improve road safety by clearly indicating the boundary between lanes travelling in opposite directions. Common Mistakes to Avoid Crossing into oncoming traffic lanes unnecessarily Unsafe overtaking near blind spots or curves Ignoring oncoming vehicles drifting over the line Driving too close to the centre line Safety Tips Maintain a safe distance from the centre line Be extra cautious on narrow or winding roads Watch for vehicles that may overtake unsafely Reduce speed in low visibility conditions Penalties and Risks for Ignoring the Marking Ignoring dividing line markings may result in: Head-on collisions with oncoming traffic Traffic fines for unsafe or illegal overtaking Loss of vehicle control in narrow lanes Severe injury or fatal accidents Summary The dividing line marking in South Africa separates traffic travelling in opposite directions. Drivers must stay in their lane, avoid unsafe overtaking, and remain alert for oncoming vehicles to ensure road safety.

On any road with two-way traffic.

To warn that vehicles on the other side of the road marking are moving in the opposite direction.

Be on the look out for approaching vehicles which may move over onto your side of the road.

Overview The Warning Markings (South Africa) – Dividing Line Marking are road surface markings used on roads with two-way traffic to separate opposing traffic flows. What the Marking Means A dividing line indicates the centre of the roadway and separates traffic moving in opposite directions. It serves as a visual warning to help drivers stay within their correct lane and remain aware of oncoming traffic. The key purpose is: to separate opposing traffic streams and warn drivers of the presence of oncoming vehicles. How It Works in Practice The line runs along the centre of a two-way road. Each side of the line carries traffic in opposite directions. Drivers must remain on their side of the dividing line unless overtaking is permitted. It helps reduce head-on collision risk by clearly defining lanes. Driver Responsibilities Stay within your lane and do not cross the dividing line unnecessarily Be alert for oncoming vehicles that may drift into your lane Only overtake when it is safe and legally permitted Adjust speed when visibility is poor or roads are narrow Where You Will See This Marking Rural two-way roads Urban streets with no physical median Mountainous or winding roads Highways without central barriers Purpose of the Marking Dividing line markings improve road safety by clearly separating opposing traffic flows and reminding drivers of the risk of oncoming vehicles crossing into their lane. Common Mistakes to Avoid Drifting over the centre line while driving Unsafe overtaking in poor visibility conditions Ignoring oncoming traffic risks on narrow roads Assuming the road is wide enough without checking Safety Tips Keep well to your side of the road at all times Reduce speed on blind bends and narrow sections Be extra cautious during night or wet conditions Watch for vehicles that may cross the centre line unexpectedly Penalties for Ignoring the Marking Ignoring dividing line rules may result in: Traffic fines for improper lane use or overtaking Head-on collisions due to lane crossing Charges for reckless or dangerous driving Increased risk of serious road accidents Summary Dividing line markings in South Africa separate opposing traffic on two-way roads. Drivers must remain on their side of the road, stay alert for oncoming vehicles, and only overtake when it is safe and legal to do so.

On any road.

To warn drivers that the lane indicated by this marking can be used for traffic from the opposite direction at various times of day or night.

Be on the look out for approaching vehicles.

Overview The Warning Markings (South Africa) – Reversible Lane Line Marking is a road surface marking used to indicate that a specific lane can change direction depending on traffic flow requirements at different times of the day. What the Marking Means This marking warns drivers that the lane may be used by traffic travelling in either direction at different times. The direction of travel in the lane is controlled by traffic management systems or signage. How It Works in Practice The same lane may serve opposite directions at different times. Lane direction changes are usually controlled by overhead signals or signs. Drivers must always follow the current indicated direction. Helps manage traffic flow during peak hours or special conditions. Driver Responsibilities Check lane direction signals before entering the lane Do not assume the lane direction remains constant Be alert for oncoming vehicles in the same lane Follow all traffic signals and signage controlling the lane Where You Will See This Marking This marking is commonly found: On busy urban roads with peak-hour congestion At bridges or bottlenecks with limited road space In city centres with dynamic traffic flow management On roads using electronic or signal-controlled lane systems Purpose of the Marking The purpose of reversible lane markings is to improve traffic flow efficiency by allowing a single lane to serve traffic in different directions at different times, depending on demand. Common Mistakes to Avoid Entering a lane without checking its current direction Ignoring overhead or electronic lane signals Driving against the current flow in the reversible lane Assuming lane direction is always the same Safety Tips Always confirm lane direction before entering Watch for overhead signals and electronic signs Be prepared for sudden changes in lane direction at set times Keep alert for oncoming traffic in reversible lanes Penalties and Risks for Ignoring the Marking Ignoring reversible lane markings may result in: Severe head-on collisions Traffic fines for wrong-direction driving Loss of vehicle control in opposing traffic flow Serious injury or fatal accidents Summary The reversible lane line marking in South Africa indicates a lane that can change direction depending on time and traffic conditions. Drivers must always follow current signals and stay alert for oncoming traffic.

On any road before coming to an intersection.

To warn that there is a yield sign ahead.

Slow down if other traffic is approaching the intersection and stop if necessary.

Overview The Warning Markings (South Africa) – Yield Sign Ahead Marking are road surface markings used to alert drivers that a yield (give way) control is approaching at the next intersection. What the Marking Means This marking serves as an advance warning that you will soon be required to yield to other traffic at an intersection ahead. It prepares drivers to reduce speed and be ready to give way. The key purpose is: to warn drivers in advance that a yield control point is ahead, requiring them to slow down and give way if necessary. How It Works in Practice The marking appears before an intersection controlled by a yield sign. Drivers are alerted early to reduce speed and prepare to yield. It helps prevent sudden stops at intersections. It improves safety where visibility or traffic flow may require caution. Driver Responsibilities Slow down when approaching the marking Be prepared to stop if traffic is approaching Yield to vehicles that already have right of way Check both directions carefully before entering the intersection Where You Will See This Marking Approaches to yield-controlled intersections Urban and suburban junctions Rural intersections with limited visibility Areas where traffic merges or crosses unexpectedly Purpose of the Marking Yield sign ahead markings improve road safety by giving drivers advance notice of a required slowdown and right-of-way change, reducing sudden braking and intersection collisions. Common Mistakes to Avoid Failing to slow down when approaching the marking Entering the intersection without checking for traffic Assuming you have right of way without confirming Stopping too late at the yield point Safety Tips Reduce speed early when you see the warning marking Scan both directions for approaching vehicles Be ready to stop completely if necessary Proceed only when it is safe and clear to do so Penalties for Ignoring the Marking Ignoring yield warning markings may result in: Traffic fines for failure to yield Intersection collisions Charges for negligent driving Obstruction of right-of-way traffic Summary The yield sign ahead marking in South Africa warns drivers that they will soon need to give way at an intersection. Drivers must slow down, stay alert, and be ready to stop if other traffic has priority.

On a multi-lane carriageway.

To warn that the traffic lanes are reduced from the left or right or from both sides.

Change lanes in time if the lane you are travelling in ends. Check both the blind spots where two lanes end from both sides to make sure there is no other vehicle that is also changing lanes.

Overview The Warning Markings (South Africa) – Lane Reduction Arrow Marking is a road surface marking used on multi-lane roads to warn drivers that the number of lanes ahead is about to decrease. What the Marking Means This marking indicates that one or more lanes will end or merge from the left, right, or both sides. Drivers must prepare to change lanes safely before reaching the point where the lane ends. How It Works in Practice Appears on multi-lane roads where lanes are reduced ahead. Uses arrows painted on the road to show which lane is ending. Gives early warning to merge safely into remaining lanes. Often used near roadworks, bridges, or lane merges. Driver Responsibilities Move into the correct lane early—do not wait until the last moment Check mirrors and blind spots before changing lanes Yield to vehicles already in the lane you are entering Be alert for vehicles also attempting to merge Where You Will See This Marking This marking is commonly found: On highways and freeways approaching lane reductions Near roadworks and construction zones At bridges or narrowed road sections Before merge points on busy urban roads Purpose of the Marking The purpose of the lane reduction arrow marking is to safely guide traffic into fewer lanes ahead, reducing sudden merging, congestion, and collision risk. Common Mistakes to Avoid Waiting too long before changing lanes Forcing your way into another lane at the merge point Ignoring lane-ending arrows on the road Failing to check blind spots when merging Safety Tips Plan lane changes as soon as you see the arrow markings Maintain a safe following distance Merge smoothly and predictably Watch for other vehicles merging at the same time Penalties and Risks for Ignoring the Marking Ignoring lane reduction markings may result in: Traffic congestion and unsafe merging behaviour Side-swipe or collision accidents Traffic fines for unsafe driving or lane violations Increased risk of serious highway accidents Summary The lane reduction arrow marking in South Africa warns drivers that a lane is ending ahead. Drivers must merge early, check blind spots, and yield appropriately to ensure safe and smooth traffic flow.

In a traffic lane on any road especially in urban areas.

To warn in time that you will be obliged to follow a certain direction at the first intersection.

Choose the correct lane in time to drive in the direction that you want to go.

Overview The Warning Markings (South Africa) – Mandatory Direction Arrow Ahead Marking are road surface markings placed in lanes to warn drivers that a specific direction will become compulsory at an upcoming intersection. What the Marking Means This marking alerts drivers in advance that the lane they are in will require them to follow a specific direction (left, right, or straight) at the next intersection. Once the intersection is reached, other movements will no longer be allowed from that lane. The key purpose is: to warn drivers early that their lane will become direction-restricted at the next intersection so they can choose the correct lane in time. How It Works in Practice The arrow appears on the road surface before an intersection. It indicates the only permitted movement from that lane at the upcoming junction. Drivers must prepare early to follow the required direction. Late lane changes may become unsafe or illegal near the intersection. Driver Responsibilities Choose the correct lane well before reaching the intersection Follow the direction indicated by the arrow when you reach the junction Avoid last-minute lane changes across traffic Check surrounding traffic when positioning for your lane Where You Will See This Marking Urban intersections with multiple lanes Busy city roads with directional lane control Approaches to signalised junctions Roads where lane movements must be pre-assigned for safety Purpose of the Marking Mandatory direction arrow ahead markings improve safety and traffic flow by guiding drivers into the correct lanes early, reducing confusion, sudden lane changes, and intersection conflicts. Common Mistakes to Avoid Staying in the wrong lane until the last moment Ignoring the directional requirement of the lane Cutting across lanes to correct route selection too late Assuming lane direction can still be changed at the intersection Safety Tips Read road markings well in advance of intersections Plan your lane choice early when approaching junctions Maintain safe following distance when positioning for a turn Expect other drivers to also be adjusting lanes Penalties for Ignoring the Marking Ignoring mandatory direction guidance may result in: Traffic fines for incorrect lane use Unsafe lane changes near intersections Collisions due to sudden manoeuvres Charges for reckless or negligent driving Summary The mandatory direction arrow ahead marking in South Africa warns drivers early that their lane will be direction-restricted at the next intersection. Drivers must choose the correct lane in advance and follow the indicated direction safely.

On any road.

To warn you that there is a no-overtaking line or no-crossing line ahead.

Ensure not to cross the prohibition line that follows the sign. If you are on the right-hand side of the road move back to the lefthand lane as soon as possible before the prohibition line starts.

Overview The Warning Markings (South Africa) – No Overtaking or No Crossing Line Ahead Marking is a road surface warning used to alert drivers that a solid no-overtaking or no-crossing line is approaching. What the Marking Means This marking warns that a prohibition line will soon begin, where crossing or overtaking becomes illegal. Drivers must prepare to return to the correct lane before the restriction starts. How It Works in Practice Appears before solid no-overtaking or no-crossing lines. Gives advance warning of overtaking restrictions ahead. Helps drivers safely reposition before restrictions begin. Common on curves, hills, and hazardous road sections. Driver Responsibilities Do not attempt overtaking once the prohibition line starts Move back into the left-hand lane before the solid line begins Check mirrors and blind spots before changing lanes Be alert for oncoming traffic in two-way roads Where You Will See This Marking This marking is commonly found: On rural roads with limited visibility Before sharp bends or blind rises Near intersections and hazard zones On roads transitioning into no-overtaking areas Purpose of the Marking The purpose of the no overtaking or no crossing line ahead marking is to warn drivers in advance of upcoming overtaking restrictions, improving road safety by preventing unsafe lane changes and risky overtaking manoeuvres. Common Mistakes to Avoid Overtaking too close to the start of the solid line Failing to return to the correct lane in time Ignoring the warning marking before restrictions begin Attempting overtaking on blind curves or hills Safety Tips Slow down when you see the warning marking Plan your lane position early Only overtake where it is clearly permitted Maintain safe following distance at all times Penalties and Risks for Ignoring the Marking Ignoring this marking may result in: Traffic fines for illegal overtaking Head-on collisions on two-way roads Loss of vehicle control in restricted areas Severe injury or fatal accidents Summary The no overtaking or no crossing line ahead marking in South Africa warns drivers that a solid prohibition line is approaching. Drivers must safely return to the correct lane and prepare to obey overtaking restrictions.

On any rural road especially in mountainous areas.

To indicate where especially drivers of heavy vehicles who become aware that a vehicle's brakes became defective, can drive such a vehicle of the road and it will be stopped by the gravel section ahead.

Only drive into this arrestor bed when your brakes fail.

Overview The Warning Markings (South Africa) – Arrestor Bed Ahead Marking are road surface warnings used mainly on rural and mountainous roads to alert drivers—especially heavy vehicle operators—of an emergency runaway area ahead. What the Marking Means This marking indicates that an arrestor bed (a specially prepared gravel or sand runoff area) is available ahead for emergency use if a vehicle experiences brake failure. The key purpose is: to provide advance warning of a safe emergency stopping area for vehicles with brake failure, especially heavy trucks on steep descents. How It Works in Practice The marking appears before a designated emergency arrestor bed. It alerts drivers of heavy or fast-moving vehicles on steep roads. The arrestor bed is designed to slow and stop a runaway vehicle using gravel resistance. It is not used for normal driving or braking situations. Driver Responsibilities Do not enter the arrestor bed under normal driving conditions Use it only in a genuine brake failure emergency Maintain control and steer directly into the arrestor bed if needed Inform authorities immediately after using the facility Where You Will See This Marking Steep downhill rural roads Mountain passes with heavy truck traffic High-risk descent sections on highways Areas with known brake overheating risks Purpose of the Marking Arrestor bed markings improve road safety by giving drivers early warning of emergency escape routes designed to stop vehicles that have lost braking ability, preventing serious downhill accidents. Common Mistakes to Avoid Entering the arrestor bed for curiosity or convenience Ignoring warning signs leading to steep descents Overheating brakes due to poor gear control Misunderstanding the arrestor bed as a normal road feature Safety Tips Use low gears when descending steep roads Maintain safe speeds to prevent brake overheating Watch for early warning signs of steep gradients Only use the arrestor bed in a true emergency Penalties / Consequences of Misuse Misuse or reckless use of an arrestor bed may result in: Fines or penalties for reckless driving Damage liability for road infrastructure Danger to other road users if misused Potential legal consequences in severe cases Summary The arrestor bed ahead marking in South Africa warns drivers of an emergency runoff area designed to stop vehicles with brake failure, especially on steep downhill roads. It is strictly for emergency use only and plays a critical role in preventing serious accidents.

On any rural road especially in mountainous areas.

To indicate where especially drivers of heavy vehicles who become aware that a vehicle's brakes became defective, can drive such a vehicle of the road and it will be stopped by the gravel section ahead.

Only drive into this arrestor bed when your brakes fail.

Overview The Warning Markings (South Africa) – Escape Road Ahead Marking is a road surface warning used on steep or mountainous roads to indicate the presence of an emergency escape route (arrestor bed) for vehicles with brake failure. What the Marking Means This marking warns drivers—especially heavy vehicle operators—that an emergency escape road is ahead. It is designed to stop a runaway vehicle safely if its brakes fail. How It Works in Practice Located on steep descents or hazardous downhill sections. Leads to a gravel or sand-filled arrestor bed designed to stop vehicles. Mainly intended for heavy vehicles such as trucks and buses. Activated only in emergency situations. Driver Responsibilities Do not enter the escape road unless your brakes have failed Monitor brake performance when descending steep slopes Use lower gears to control speed before reaching danger points Stay alert for escape road warning signs ahead Where You Will See This Marking This marking is commonly found: On steep mountain passes Along long downhill rural roads Near areas with high heavy-vehicle traffic Before engineered runaway truck ramps or arrestor beds Purpose of the Marking The purpose of the escape road ahead marking is to warn drivers of the availability of a safety system designed to stop vehicles that have lost braking ability, reducing the risk of serious downhill crashes. Common Mistakes to Avoid Entering the escape road without a brake emergency Ignoring warning signs on steep descents Overheating brakes by improper gear use Misjudging speed on long downhill slopes Safety Tips Use engine braking on long descents Check brake condition before mountain driving Reduce speed early when descending steep roads Stay alert for escape road signage ahead Penalties and Risks for Ignoring Proper Use Improper use or failure to respond to escape road warnings may result in: Severe loss-of-control crashes on steep slopes Damage to arrestor bed systems if misused Danger to other road users in downhill sections Serious injury or fatal accidents Summary The escape road ahead marking in South Africa warns drivers of an emergency stopping area for vehicles with brake failure. It is a critical safety feature designed to prevent runaway vehicle accidents on steep descents and must only be used in genuine emergencies.

On any road especially in urban areas.

To warn that there is a speed hump in the road.

Slow down and release your brake before driving over the speed hump.

Overview The Warning Markings (South Africa) – Speed Hump Marking are road surface markings used to alert drivers that a physical speed hump is present ahead. These markings are commonly used in urban and residential areas to control vehicle speed. What the Marking Means This marking warns drivers that they are approaching a speed hump and must reduce speed to pass over it safely. It is usually painted on the road in advance of the hump for early awareness. The key purpose is: to warn drivers of an upcoming speed hump so they can slow down and safely negotiate it without losing control or damaging the vehicle. How It Works in Practice The marking appears before physical speed humps on the roadway. Drivers are expected to reduce speed significantly before reaching the hump. Braking should be done before the hump, not while driving over it. Vehicles pass over the hump at a controlled, low speed. Driver Responsibilities Slow down well before reaching the speed hump Release or ease braking just before driving over it for smoother passage Maintain control of the vehicle at all times Watch for pedestrians in residential areas where humps are common Where You Will See This Marking Residential streets School zones Shopping area access roads Urban traffic calming zones Purpose of the Marking Speed hump markings improve safety by warning drivers in advance of traffic calming structures, helping reduce sudden braking, vehicle damage, and unsafe driving behaviour in pedestrian-heavy areas. Common Mistakes to Avoid Approaching speed humps at high speed Braking suddenly while already on the hump Ignoring repeated humps in residential areas Failing to look out for pedestrians near humps Safety Tips Reduce speed early when you see warning markings Drive smoothly over the hump without sudden braking Maintain a steady, controlled speed Be especially cautious at night or in poor visibility Penalties / Consequences of Ignoring the Marking Ignoring speed hump warnings may result in: Vehicle damage (suspension, tyres, alignment) Loss of vehicle control Traffic fines for dangerous or reckless driving Increased risk of pedestrian collisions in residential areas Summary Speed hump markings in South Africa warn drivers of upcoming traffic calming humps. Drivers must slow down in advance and cross the hump carefully to ensure vehicle safety and protect pedestrians in the area.

On any road.

To indicate the end of an exclusive lane.

Follow the indicated arrows to continue in the right lane. Do not use the current lane any further.

Overview The Warning Markings (South Africa) – End of Exclusive Use Lane Arrows Marking is a road surface marking used to inform drivers that a dedicated lane is ending and that they must merge back into general traffic lanes. What the Marking Means This marking indicates that an exclusive-use lane (such as a bus, taxi, or special vehicle lane) is ending ahead. Drivers must follow the directional arrows to safely rejoin the appropriate lane. How It Works in Practice Appears where dedicated lanes terminate. Uses arrows to guide vehicles into the correct continuing lane. Helps prevent sudden or unsafe lane changes. Ensures smooth merging into normal traffic flow. Driver Responsibilities Follow the direction of the arrows on the road Merge early—do not wait until the lane ends Check mirrors and blind spots before changing lanes Yield to traffic already in the lane you are entering Where You Will See This Marking This marking is commonly found: At the end of bus or taxi lanes Near intersections and urban traffic corridors On highways where special-use lanes terminate Before lane merges or road narrowing sections Purpose of the Marking The purpose of the end of exclusive use lane arrows is to guide drivers safely out of restricted lanes and into general traffic lanes, reducing confusion and preventing unsafe last-minute lane changes. Common Mistakes to Avoid Continuing in the exclusive lane after it ends Ignoring directional arrows on the road surface Changing lanes too late or abruptly Failing to check blind spots before merging Safety Tips Plan your lane change as soon as you see the arrows Maintain a safe and steady speed while merging Watch for vehicles already in the main lane Signal early before changing lanes Penalties and Risks for Ignoring the Marking Ignoring this marking may result in: Traffic fines for illegal lane use Unsafe merging and collision risk Disruption of public transport or traffic flow Increased likelihood of side-impact accidents Summary The end of exclusive use lane arrows marking in South Africa guides drivers out of restricted lanes and into general traffic. Drivers must follow the arrows, merge early, and ensure safe lane transitions.

On any road.

To indicate the end of an exclusive lane.

Follow the indicated arrows to continue in the right lane. Do not use the current lane any further.

Overview The Warning Markings (South Africa) – End of Exclusive Use Lane Arrows Marking is a road surface marking used to indicate that a dedicated or exclusive-use lane is ending ahead. What the Marking Means This marking informs drivers that the current lane is no longer available for continued travel and must be vacated. Drivers are directed by arrows to move into the correct adjacent lane. How It Works in Practice Appears at the point where an exclusive lane terminates. Uses directional arrows to guide vehicles into the continuing lane. Prevents confusion at lane endings. Ensures a safe and orderly merge into general traffic. Driver Responsibilities Follow the direction of the arrows on the road surface Leave the exclusive lane before it ends completely Check mirrors and blind spots before merging Yield to vehicles already in the lane you are entering Where You Will See This Marking This marking is commonly found: At the end of bus lanes or taxi lanes On urban roads with dedicated traffic lanes Near intersections or merge points On highways where special-use lanes terminate Purpose of the Marking The purpose of this marking is to safely guide drivers out of exclusive-use lanes and into general traffic lanes, reducing sudden lane changes and improving traffic flow and safety. Common Mistakes to Avoid Continuing to drive in the exclusive lane after it ends Ignoring the directional arrows Changing lanes too late or abruptly Failing to check blind spots before merging Safety Tips Start merging as soon as you see the arrows Signal early before changing lanes Maintain a steady and safe speed while merging Watch for vehicles already in the main lane Penalties and Risks for Ignoring the Marking Ignoring this marking may result in: Traffic fines for improper lane use Collisions due to sudden or unsafe merging Obstruction of traffic flow in peak areas Increased risk of side-impact accidents Summary The end of exclusive use lane arrows marking in South Africa instructs drivers to leave a dedicated lane and merge safely into the correct traffic lane. Drivers must follow the arrows, merge early, and avoid sudden lane changes.