On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Signs (South Africa) – Speed Limit on an Uneven Road for a Distance, Flashing Light is a temporary road safety warning sign used in areas where road surface conditions are poor or under repair. It combines a speed restriction, a road condition warning, and enhanced visibility through flashing lights. What the Sign Means This sign warns drivers that the road ahead is uneven or damaged for a specified distance, and that a reduced speed limit applies. Flashing lights are used to increase visibility, especially at night or in poor weather. The key instruction is: slow down and obey the reduced speed limit while driving over an uneven road surface for the indicated distance. The key purpose is: to guide road users by combining a temporary speed restriction, road surface warning, and high-visibility alert system. How It Works in Practice The sign is placed in temporary roadwork or damaged road zones. It indicates a reduced speed limit over a set distance. Flashing lights improve visibility of the warning. It alerts drivers to uneven surfaces that may affect vehicle control. Driver Responsibilities Reduce speed immediately when approaching the sign Maintain control over uneven or rough road surfaces Follow the indicated speed limit for the full distance Be alert for potholes, loose gravel, or construction activity Where You Will See This Sign Road construction and maintenance zones Temporary detour routes Damaged or deteriorated road sections Highway repair or resurfacing areas Purpose of the Sign Temporary combination signs improve road safety by warning drivers of hazardous road surfaces and enforcing reduced speeds, reducing the risk of vehicle damage and loss of control in work zones. Common Mistakes to Avoid Driving at normal speed over uneven surfaces Ignoring flashing warning lights Failing to slow down for the full restricted distance Not anticipating sudden bumps or potholes Safety Tips Slow down as soon as you see flashing warning lights Keep both hands firmly on the steering wheel Maintain extra following distance Stay alert for road workers and machinery Summary Temporary “Speed Limit on an Uneven Road for a Distance, Flashing Light” signs in South Africa warn drivers of rough road conditions ahead. They improve safety by enforcing reduced speeds and increasing visibility in temporary or damaged road areas.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Sign – Speed Limit with Text Message in South Africa is a temporary regulatory warning sign used on public roads to communicate short-term speed restrictions together with a specific written instruction. It is commonly used in changing road conditions such as construction zones, accidents, or special events. What the Sign Means This sign indicates that a temporary speed limit is in place and must be obeyed, along with an additional instruction shown in text (for example: “Roadworks ahead”, “Workers present”, or “Loose gravel”). Drivers must comply with both the speed restriction and the message. How It Works in Practice Applies a reduced or adjusted speed limit temporarily. Includes a written message explaining the hazard or condition. Used in dynamic or changing road environments. Often enforced during roadworks or emergencies. Driver Responsibilities Immediately adjust speed to the posted temporary limit Read and follow the accompanying text message carefully Be alert for workers, vehicles, or hazards in the area Follow any additional instructions from traffic officers Where You Will See This Sign This sign is commonly found: In road construction and maintenance zones At accident scenes or emergency repairs During temporary traffic diversions or events On highways with changing road conditions Purpose of the Sign The purpose of the temporary combination speed limit sign is to ensure driver safety in changing or hazardous conditions by providing both a speed restriction and clear written instructions for the situation ahead. Common Mistakes to Avoid Ignoring temporary speed limits in construction zones Failing to read or understand the text message Speeding through active work or hazard areas Assuming normal road rules still apply Safety Tips Slow down as soon as you see temporary signage Expect sudden changes in traffic flow or lane closures Watch carefully for workers and equipment Stay patient and maintain safe following distances Penalties and Risks for Ignoring Guidance Ignoring this sign may result in: Fines for exceeding temporary speed limits Serious collisions in construction or hazard zones Damage to vehicles or road workers’ safety risks Legal liability for accidents in restricted areas Summary The temporary combination speed limit and text message sign in South Africa ensures drivers respond appropriately to short-term road hazards by reducing speed and following specific instructions, improving safety in dynamic road environments.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Signs (South Africa) – Switch Head Lamps On, Reduced Visibility is a temporary warning sign used on public roads where visibility conditions are poor. It combines a mandatory instruction (switch headlights on) with a hazard warning (reduced visibility). What the Sign Means This sign indicates that drivers must switch on their vehicle headlights because visibility ahead is reduced. Conditions may include fog, heavy rain, dust, smoke, or roadworks. The key instruction is: switch on your headlights and proceed carefully due to reduced visibility conditions. The key purpose is: to guide road users by combining a visibility warning with a mandatory lighting requirement for safer driving. How It Works in Practice The sign is placed in temporary hazard zones with poor visibility. It instructs drivers to turn on headlights immediately. It warns that visibility ahead is limited or obstructed. It improves safety in fog, dust, smoke, or work zones. Driver Responsibilities Switch on headlights as soon as you see the sign Reduce speed according to road conditions Increase following distance from other vehicles Remain alert for sudden obstacles or slow-moving traffic Where You Will See This Sign Fog-prone highways and rural roads Road construction and maintenance zones Dusty or smoky environments Temporary traffic control areas Purpose of the Sign This temporary combination sign improves road safety by ensuring vehicles are visible in low-visibility conditions and by reducing speed-related risks in hazardous environments. Common Mistakes to Avoid Driving without headlights in reduced visibility Maintaining normal speed in fog or dust Following other vehicles too closely Ignoring temporary warning signs in work zones Safety Tips Turn on headlights immediately when instructed Use low beam lights in fog or dust conditions Slow down and drive defensively Be prepared for sudden stops or obstacles Summary Temporary “Switch Head Lamps On, Reduced Visibility” signs in South Africa improve road safety by requiring headlights and reduced speeds in poor visibility conditions. They help ensure vehicles remain visible and controlled in hazardous environments.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Sign – Roadworks Ahead (Advance Warning) in South Africa is a temporary road safety sign used on public roads to warn drivers that road construction or maintenance work is taking place ahead. It forms part of a combination warning system that prepares drivers for changing conditions. What the Sign Means This sign indicates that roadworks are located a certain distance ahead. Drivers must reduce speed, stay alert, and be prepared for lane closures, workers, equipment, or temporary traffic changes. How It Works in Practice Provides advance warning of construction or maintenance activity. May include a distance indicator to the work zone. Often combined with reduced speed limits and lane control signs. Indicates changing or hazardous road conditions ahead. Driver Responsibilities Reduce speed immediately when approaching the warning area Watch for workers, machinery, and cones or barriers Follow all temporary signs and traffic controllers Prepare for lane shifts or stop-and-go traffic Where You Will See This Sign This sign is commonly found: On highways undergoing maintenance In urban construction zones Near bridge repairs or resurfacing projects Along road expansion or infrastructure upgrades Purpose of the Sign The purpose of the temporary roadworks advance warning sign is to improve safety by alerting drivers early to construction zones, reducing speed-related incidents and ensuring smooth traffic flow through work areas. Common Mistakes to Avoid Ignoring early warning signs and maintaining high speed Following vehicles too closely in congested zones Entering work areas without paying attention to signage Failing to adjust driving for changing road conditions Safety Tips Slow down well before reaching the roadworks area Keep a safe distance from other vehicles Follow all instructions from traffic controllers Stay alert for sudden stops or lane changes Penalties and Risks for Ignoring Guidance Ignoring this sign may result in: Fines for speeding in construction zones Collisions with workers or equipment Vehicle damage from uneven or altered road surfaces Serious injury or fatal accidents Summary The temporary roadworks advance warning sign in South Africa helps drivers prepare for construction zones ahead, improving safety by encouraging slower speeds and greater caution in changing road environments.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Signs (South Africa) – Keep Left is a temporary road guidance sign used to direct traffic safely around hazards, roadworks, or obstructions. It combines a mandatory directional instruction with temporary traffic control conditions. What the Sign Means This sign instructs drivers to keep left of an obstruction or traffic control point. It is typically used where part of the road is closed or where traffic must be guided safely around a hazard. The key instruction is: all road users must move or remain to the left side of the roadway as indicated. The key purpose is: to guide road users safely past temporary hazards by enforcing a left-side passing requirement. How It Works in Practice The sign is placed in roadwork zones or around temporary obstructions. It directs traffic to stay on the left side of the carriageway. It helps separate vehicles from danger zones or work areas. It may be combined with cones, barriers, or additional signage. Driver Responsibilities Follow the “keep left” instruction at all times in the affected area Reduce speed when approaching temporary roadworks Watch for workers, machinery, and obstacles Do not cross into restricted or closed lanes Where You Will See This Sign Road construction and maintenance sites Lane closures or partial road blockages Accident scenes with traffic control Temporary detours or diversion routes Purpose of the Sign Temporary “Keep Left” combination signs improve road safety by guiding traffic away from hazards and ensuring vehicles move safely through or around restricted areas. Common Mistakes to Avoid Ignoring temporary directional instructions Driving into closed or restricted areas Failing to reduce speed in work zones Not paying attention to cones or barriers Safety Tips Slow down well before entering roadwork areas Follow all temporary signage and markings carefully Maintain a safe distance from construction workers and equipment Stay alert for sudden changes in lane direction Summary Temporary “Keep Left” signs in South Africa guide drivers safely around roadworks or obstructions by requiring traffic to stay on the left side. They improve safety by preventing entry into hazardous or closed areas.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Sign – Stop by Police in South Africa is a temporary regulatory road sign used on public roads to instruct drivers that they must stop at a police control point ahead. It is often used during roadblocks, safety checks, or enforcement operations. What the Sign Means This sign indicates that all vehicles approaching the control point must stop when directed by police officers. It warns drivers in advance so they can reduce speed and prepare to comply safely and in an orderly manner. How It Works in Practice Alerts drivers to an upcoming police stop or roadblock. May include a distance warning before the control point. Requires vehicles to stop when instructed by police officers. Used for law enforcement, safety checks, or traffic control. Driver Responsibilities Slow down immediately when approaching the warning sign Be prepared to stop completely at the control point Follow instructions from police officers without delay Keep documents (licence, registration) ready if required Where You Will See This Sign This sign is commonly found: At temporary police roadblocks During law enforcement operations on highways Near accident scenes or security checkpoints Along strategic traffic control routes Purpose of the Sign The purpose of the “Stop by Police” temporary combination sign is to ensure drivers are safely and efficiently guided into law enforcement control areas, improving compliance, road safety, and security. Common Mistakes to Avoid Failing to slow down at the approach to a roadblock Ignoring police instructions to stop Attempting to bypass a control point Not having required documents ready Safety Tips Reduce speed well in advance of the control point Keep both hands on the steering wheel when approaching Stay calm and follow officer instructions Allow extra travel time when roadblocks are expected Penalties and Risks for Ignoring Guidance Ignoring this sign may result in: Fines or arrest for failing to comply with police instructions Vehicle search or detention Serious legal consequences Increased safety risks at enforcement zones Summary The temporary “Stop by Police” combination sign in South Africa ensures drivers safely approach and comply with law enforcement roadblocks, supporting road safety, security, and traffic regulation.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Signs (South Africa) – Vehicles Exceeding a Mass Only, a Distance Ahead is a temporary regulatory warning sign used on public roads to control heavy vehicle movement in advance of a restricted area. It combines a vehicle-weight restriction with advance distance information. What the Sign Means This sign indicates that vehicles exceeding a specified mass (typically heavy goods vehicles) will be subject to a restriction ahead, and they must take a specific action or route at a point indicated by the distance marker. The key instruction is: drivers of vehicles exceeding the indicated mass must prepare to follow the required restriction or direction at the upcoming point. The key purpose is: to guide road users by providing advance warning of mass-based vehicle restrictions at a specific distance ahead. How It Works in Practice The sign is used in temporary traffic management zones such as roadworks or detours. It applies specifically to vehicles exceeding a stated mass limit. It gives advance notice (e.g., “a distance ahead”) to allow safe lane changes or route adjustments. It helps prevent heavy vehicles from entering unsuitable or restricted areas. Driver Responsibilities Check your vehicle mass classification before continuing Prepare to change route or lane if your vehicle exceeds the limit Reduce speed and follow advance warning instructions Watch for additional temporary signs ahead Where You Will See This Sign Temporary roadworks and construction zones Detours or diverted traffic routes Bridge or road sections with weight restrictions Highways undergoing maintenance or partial closures Purpose of the Sign This temporary combination sign improves road safety and infrastructure protection by managing heavy vehicle movement in advance, reducing congestion and preventing damage to restricted road sections. Common Mistakes to Avoid Ignoring mass-based restrictions when approaching roadworks Failing to change route in time Continuing into restricted zones with heavy vehicles Not observing additional temporary signage Safety Tips Plan alternative routes early if driving a heavy vehicle Slow down when approaching temporary signage zones Stay alert for rapidly changing road conditions Follow all instructions from traffic controllers if present Summary Temporary “Vehicles Exceeding a Mass Only, a Distance Ahead” signs in South Africa warn heavy vehicles of upcoming restrictions in advance. They improve safety by allowing drivers time to adjust routes and avoid entering unsuitable or restricted road sections.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Sign – Proceed Right Only (Motorcycles) in South Africa is a temporary regulatory sign used on public roads to control traffic movement during special conditions such as roadworks, lane closures, or traffic management operations. It applies specifically to motorcycles and directs their movement at a junction or controlled point. What the Sign Means This sign indicates that motorcycles are only permitted to proceed to the right at the next junction or controlled point. It is a temporary restriction used to safely manage traffic flow in changing road conditions. How It Works in Practice Applies specifically to motorcycles. Requires motorcycles to turn or proceed only to the right. Used in temporary traffic setups such as roadworks or diversions. Helps separate vehicle types for safety and efficiency. Driver Responsibilities Motorcyclists must follow the mandatory right-turn instruction Reduce speed when approaching the controlled area Watch for cones, barriers, and traffic controllers Do not attempt to proceed in any other direction Where You Will See This Sign This sign is commonly found: In roadworks and construction zones At temporary junction diversions Near accident scenes or lane closures In traffic-controlled urban areas Purpose of the Sign The purpose of this temporary combination sign is to safely direct motorcycles through altered traffic layouts, ensuring smooth flow and reducing conflicts with other vehicles during temporary road conditions. Common Mistakes to Avoid Ignoring the motorcycle-specific direction instruction Following normal lane rules instead of temporary signage Riding through closed or restricted lanes Failing to observe roadwork barriers or cones Safety Tips Slow down early when approaching temporary control points Watch carefully for directional arrows and signage Maintain full control of the motorcycle at low speeds Follow traffic officers or flag persons if present Penalties and Risks for Ignoring Guidance Ignoring this sign may result in: Fines for disobeying temporary traffic control signs Accidents due to entering restricted or unsafe areas Collisions with construction equipment or other vehicles Serious injury in controlled work zones Summary The temporary “Proceed Right Only – Motorcycles” combination sign in South Africa ensures safe motorcycle movement through changing road conditions by directing riders to a specific path during temporary traffic control situations.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Signs (South Africa) – No Right Turn Ahead, Buses is a temporary regulatory combination sign used on public roads to manage bus movements during roadworks, diversions, or temporary traffic control situations. It combines a directional restriction with a vehicle-type-specific rule. What the Sign Means This sign indicates that buses are not allowed to turn right at the upcoming junction. Instead, buses must continue straight or follow an alternative route as directed by temporary traffic control measures. The key instruction is: buses must not turn right at the next junction and must follow the designated alternative route. The key purpose is: to guide road users by combining a turn restriction with a bus-specific routing instruction in a temporary traffic situation. How It Works in Practice The sign is used in roadworks or temporary diversion zones. It applies specifically to buses, not all vehicles. It prohibits a right turn at the next junction for buses. It helps maintain safe and efficient public transport routing during disruptions. Driver Responsibilities If operating a bus, do not turn right at the indicated junction Follow temporary diversion routes provided Reduce speed when approaching construction or control zones Watch for additional temporary signage or traffic controllers Where You Will See This Sign Road construction and maintenance areas Temporary bus route diversions Urban intersections under traffic control Areas with adjusted public transport routing Purpose of the Sign This temporary combination sign improves road safety and traffic management by controlling bus movements during disruptions, ensuring public transport continues to operate safely and efficiently while avoiding restricted or unsafe turns. Common Mistakes to Avoid Buses attempting to turn right despite the restriction Ignoring temporary diversion signage Late lane changes near intersections Failing to follow traffic controller instructions Safety Tips Observe all temporary signs well in advance Plan alternate routes before reaching junctions Maintain reduced speed in work zones Stay alert for pedestrians and construction activity Summary Temporary “No Right Turn Ahead, Buses” signs in South Africa restrict bus turning movements during roadworks or diversions. They improve safety and traffic flow by guiding buses along safe, designated routes in temporary traffic conditions.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Sign – No Parking (Motorcycles) in South Africa is a temporary regulatory sign used on public roads to prohibit parking by motorcycles in a specific area for a limited period. It is typically used during roadworks, events, or traffic management operations. What the Sign Means This sign indicates that motorcycles are not allowed to park in the designated area. The restriction is temporary and applies for the duration of the roadworks or special traffic control situation. How It Works in Practice Applies specifically to motorcycles. Prohibits parking in the marked or controlled area. Used during temporary traffic management situations. May be enforced by traffic officers or signage barriers. Driver Responsibilities Do not park motorcycles in restricted areas Find alternative legal parking nearby Follow all temporary traffic control instructions Be alert for additional signage or diversion notices Where You Will See This Sign This sign is commonly found: In roadworks or construction zones Near events or temporary public gatherings In congested urban areas under traffic control Along roads with temporary safety restrictions Purpose of the Sign The purpose of this temporary combination sign is to ensure clear road space and improve safety by preventing motorcycles from parking in areas where traffic flow or construction activity requires unobstructed space. Common Mistakes to Avoid Parking a motorcycle in a restricted temporary zone Ignoring temporary roadwork signage Assuming normal parking rules still apply Leaving motorcycles unattended in controlled areas Safety Tips Always check for temporary parking restrictions Use designated parking areas only Stay aware of changing road conditions Follow instructions from traffic officers or signage Penalties and Risks for Ignoring Guidance Ignoring this sign may result in: Fines for illegal parking in restricted zones Removal or towing of the motorcycle Obstruction of roadworks or traffic flow Increased safety risks in controlled areas Summary The temporary “No Parking – Motorcycles” combination sign in South Africa helps maintain clear and safe road space during temporary traffic control situations by restricting motorcycle parking where necessary.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Signs (South Africa) – Construction Vehicle, One Time Period is a temporary regulatory sign used on public roads to manage construction-related traffic during a specific time period. It combines a vehicle-type restriction with a time-based operational condition. What the Sign Means This sign indicates that construction vehicles are subject to specific restrictions or instructions during a defined time period (for example, only during certain hours or phases of a project). It is used to control the movement of construction-related traffic in and around work zones. The key instruction is: construction vehicles must comply with the indicated restriction during the specified time period. The key purpose is: to guide road users by combining a vehicle category control with a temporary time-based traffic management rule. How It Works in Practice The sign is placed in and around construction or roadwork sites. It applies specifically to construction vehicles, not general traffic. It may limit access, movement, or operating times. It is used to manage safety and reduce congestion during active works. Driver Responsibilities If operating a construction vehicle, follow the time-based restriction strictly Do not enter or move outside permitted time periods Follow site instructions and traffic controllers Be alert for changing work zone conditions Where You Will See This Sign Active road construction sites Infrastructure upgrade projects Temporary access roads for heavy machinery Urban development or building sites near public roads Purpose of the Sign Temporary construction vehicle combination signs improve safety and coordination by controlling when and how construction vehicles use public roads, reducing conflict with general traffic and protecting road workers. Common Mistakes to Avoid Operating construction vehicles outside permitted times Ignoring temporary site instructions Entering restricted construction zones without authorization Failing to follow traffic controllers or detours Safety Tips Check permitted operating times before entering work zones Drive cautiously within construction areas Watch for workers, machinery, and changing layouts Follow all temporary signage and instructions carefully Summary Temporary “Construction Vehicle, One Time Period” signs in South Africa regulate construction vehicle movement during specific timeframes. They improve safety and efficiency by coordinating construction traffic with roadworks and general traffic flow.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Sign – Roadworks for a Distance in South Africa is a temporary road safety sign used to warn drivers that road construction or maintenance will continue over a specified length of road. It indicates that multiple temporary restrictions may apply throughout the entire section. What the Sign Means This sign informs road users that roadworks are not limited to a single point but extend over a distance. Drivers must expect ongoing construction activity, reduced speeds, and possible lane changes throughout the affected section. How It Works in Practice Indicates roadworks continue over a defined distance. May include speed limits, lane closures, or detours. Applies throughout the entire construction zone. Often accompanied by additional warning and control signs. Driver Responsibilities Reduce speed immediately when entering the roadworks zone Remain alert for workers, machinery, and changing lanes Follow all temporary signs and traffic controllers Drive cautiously for the full length of the section Where You Will See This Sign This sign is commonly found: On highway maintenance and resurfacing projects Along long stretches of road under repair In urban construction corridors Near infrastructure upgrade zones (bridges, roads, drainage) Purpose of the Sign The purpose of the roadworks-for-a-distance sign is to prepare drivers for extended construction activity, ensuring they maintain safe speeds and awareness over the entire affected section rather than only at a single point. Common Mistakes to Avoid Speeding up after passing the first work area Ignoring repeated warning signs along the route Following other vehicles too closely in narrow lanes Failing to expect sudden changes in traffic flow Safety Tips Maintain a steady reduced speed for the entire distance Watch for workers and equipment at all times Be prepared for stop-and-go traffic conditions Follow all cones, barriers, and temporary markings Penalties and Risks for Ignoring Guidance Ignoring this sign may result in: Fines for speeding in construction zones Collisions with road workers or machinery Vehicle damage due to unsafe road conditions Serious injury or fatal accidents Summary The temporary roadworks-for-a-distance combination sign in South Africa ensures drivers remain cautious throughout extended construction zones, improving safety for both road users and workers.

On any public road.

To indicate that multiple restrictions or requirements may apply to road users

Overview The Temporary Combination Signs (South Africa) – Stop/Go Control Ahead, a Distance Ahead is a temporary traffic control warning sign used in roadwork or restricted zones. It combines advance distance information with a mandatory stop/go control instruction ahead. What the Sign Means This sign indicates that a Stop/Go traffic control point is located a certain distance ahead, where vehicles will be directed to either stop or proceed under the control of a flag person or automated system. The key instruction is: reduce speed and prepare to obey Stop/Go control instructions at the upcoming point. The key purpose is: to guide road users by providing advance warning of temporary traffic control with alternating stop and go movements. How It Works in Practice The sign is placed before roadworks or single-lane controlled sections. It indicates the distance to the Stop/Go control point. Traffic is alternately stopped and released to pass safely through the work zone. It is commonly managed by traffic officers or flag personnel. Driver Responsibilities Slow down immediately when approaching the sign Be prepared to stop completely at the control point Follow instructions from flag persons or signals Proceed only when given clear permission to go Where You Will See This Sign Road construction and maintenance zones Single-lane traffic sections Bridge repairs or narrow roadway areas Temporary detours or emergency roadworks Purpose of the Sign This temporary combination sign improves road safety by warning drivers of controlled traffic flow ahead, reducing confusion and preventing collisions in narrow or hazardous work zones. Common Mistakes to Avoid Approaching the control point at high speed Ignoring Stop/Go instructions from flag personnel Attempting to pass without permission Failing to reduce speed in advance Safety Tips Slow down well before reaching the control point Stay alert for hand signals or traffic lights Maintain a safe following distance Be patient and wait for clear instructions before proceeding Summary Temporary “Stop/Go Control Ahead, a Distance Ahead” signs in South Africa warn drivers of upcoming controlled traffic points. They improve safety by ensuring orderly, alternating vehicle movement through construction or restricted road sections.