On any road especially at intersections and pedestrian crossings.

To indicate where you must bring your vehicle to a standstill.

Stop with the front of your vehicle behind the stop sign. If there is no stop sign, the stop line will have the same meaning as a stop sign.

Overview The Transverse Regulatory Markings (South Africa) – Stop Line Marking is a road marking used at intersections and pedestrian crossings to indicate where vehicles must come to a complete stop. What the Marking Means This solid line across the road shows the exact point where a vehicle must stop when required to do so by a stop sign, traffic signal, or road rule. If no stop sign is present, the stop line itself still carries the legal requirement to stop. How It Works in Practice Drivers must stop before their vehicle crosses the line. It is commonly used with stop signs or traffic lights. It ensures clear visibility for intersecting traffic and pedestrians. It defines a consistent stopping point for all vehicles. Driver Responsibilities Bring the vehicle to a complete standstill behind the stop line Ensure the front of the vehicle does not cross the line Check for pedestrians and cross traffic before proceeding Comply even if no stop sign is visible but a stop line is present Where You Will See This Marking This marking is commonly found: At intersections controlled by stop signs or traffic lights At pedestrian crossings At railway crossings or controlled junctions In urban and suburban road networks Purpose of the Marking The purpose of the stop line marking is to clearly indicate the legal stopping position for vehicles, improving safety and ensuring orderly traffic flow at intersections and crossings. Common Mistakes to Avoid Stopping over or past the line Rolling forward without coming to a full stop Confusing the stop line with general lane markings Failing to stop when no stop sign is present but a stop line exists Safety Tips Always stop completely before the line Look both ways before proceeding Yield to pedestrians at crossings Proceed only when it is safe and legal to do so Penalties for Ignoring the Marking Ignoring the stop line marking may result in: Traffic fines for failing to stop Increased risk of intersection collisions Endangering pedestrians and other vehicles Legal liability in the event of an accident Summary The stop line marking in South Africa indicates where vehicles must come to a complete stop at intersections or crossings. Drivers must stop behind the line and proceed only when it is safe to do so.

On any road especially at intersections.

To indicate that you must give priority to all who cross in front of you at this point.

Give way to any one who crosses your path of travel or who wants to cross your path. Even if there is no yield sign, you still have to give way.

Overview The Transverse Regulatory Markings (South Africa) – Yield Line Marking are road surface markings used at intersections and junctions to indicate where drivers must give way to other traffic. What the Marking Means A yield line (usually a broken “give way” line across the road) shows the point where drivers must slow down and be prepared to stop to allow other road users to pass safely. The key purpose is: to indicate that drivers must yield to crossing traffic and give priority to vehicles or pedestrians already in or crossing the intersection. How It Works in Practice The line marks the point where you must yield before entering the intersection. Traffic on the intersecting road may have right of way. Drivers must check both directions before proceeding. It applies even if a physical yield sign is not present. Driver Responsibilities Slow down when approaching the yield line Stop if necessary to allow safe crossing of other traffic Give way to all vehicles and pedestrians in the intersection Proceed only when the road is completely clear Where You Will See This Marking At intersections and junctions At roundabouts or merging points At entries from side roads onto main roads In urban, suburban, and rural road networks Purpose of the Marking Yield line markings help regulate traffic flow by clearly showing where drivers must give way, reducing confusion and preventing collisions at intersections. Common Mistakes to Avoid Driving over the line without checking for traffic Assuming you have right of way automatically Failing to yield to pedestrians or cyclists Entering intersections too quickly Safety Tips Approach the yield line slowly and cautiously Look left, right, and ahead before entering Be prepared to stop completely if needed Only proceed when it is safe and clear Penalties for Ignoring the Marking Ignoring yield line markings may result in: Collisions at intersections Traffic fines for failure to yield Dangerous driving charges in serious cases Liability for causing accidents Summary The yield line marking in South Africa indicates where drivers must give way to crossing traffic. Drivers must slow down, check for other road users, and proceed only when it is safe to do so.

On any road especially in urban areas at intersections and close to schools.

To inform you that priority must be given to pedestrians crossing or wanting to cross the road at these places.

Look out for any pedestrians crossing or wanting to cross the road and give them priority by slowing down or stopping.

Overview The Transverse Regulatory Markings (South Africa) – Pedestrian Crossing Lines Marking is used on roads to indicate designated pedestrian crossing areas, especially at intersections, schools, and busy urban streets. What the Marking Means These painted road markings show where pedestrians have the right of way to cross the road. Drivers must yield to pedestrians who are crossing or intending to cross within the marked area. How It Works in Practice Defines a safe crossing zone for pedestrians. Indicates that pedestrians have priority over vehicles. Commonly used with signage or traffic signals. Requires drivers to slow down or stop when necessary. Driver Responsibilities Slow down when approaching pedestrian crossing lines Be prepared to stop for pedestrians crossing or waiting to cross Never block the crossing area Proceed only when the crossing is completely clear Where You Will See This Marking This marking is commonly found: At intersections in urban areas Near schools and pedestrian-heavy zones At shopping centres and public facilities At signalised or uncontrolled crossings Purpose of the Marking The purpose of pedestrian crossing lines is to clearly define where pedestrians may safely cross and to ensure that vehicles yield, improving road safety in high-foot-traffic areas. Common Mistakes to Avoid Failing to slow down when approaching a crossing Driving through while pedestrians are crossing Stopping on top of the crossing area Ignoring pedestrians waiting to cross Safety Tips Always scan for pedestrians before entering a crossing zone Reduce speed in school and urban areas Stop completely if pedestrians are present Allow sufficient time for pedestrians to cross safely Penalties for Ignoring the Marking Ignoring pedestrian crossing markings may result in: Traffic fines for failing to yield Increased risk of pedestrian collisions Serious injury or fatalities Legal consequences for negligent driving Summary Pedestrian crossing line markings in South Africa indicate areas where pedestrians have priority. Drivers must slow down, yield, and ensure crossings are clear before proceeding.

On any road especially in urban areas at intersections and close to schools.

To inform you that priority must be given to pedestrians crossing or wanting to cross the road at these places.

Look out for any pedestrians crossing or wanting to cross the road and give them priority by slowing down or stopping.

Overview The Transverse Regulatory Markings (South Africa) – Block Pedestrian Crossing Marking are road surface markings used mainly in urban areas, especially at intersections and near schools, to indicate a designated pedestrian crossing area. What the Marking Means These wide block-style markings show where pedestrians have priority to cross the road safely. Drivers must yield to pedestrians within or approaching this marked crossing area. The key purpose is: to give pedestrians priority at designated crossings and require drivers to slow down or stop when pedestrians are present. How It Works in Practice The marking defines a clear pedestrian crossing zone on the roadway. Pedestrians within or stepping onto the crossing have priority. Vehicles must yield, even if there is no physical traffic signal present. These crossings are often placed near high-foot-traffic areas. Driver Responsibilities Slow down when approaching the crossing Be prepared to stop for pedestrians at any time Never overtake vehicles that are stopping for pedestrians Remain alert for children or unexpected crossing movement Where You Will See This Marking Urban intersections and city streets School zones and pedestrian-heavy areas Shopping districts and public transport hubs Residential areas with frequent pedestrian movement Purpose of the Marking Block pedestrian crossing markings improve safety by clearly identifying where pedestrians are expected to cross and ensuring they are given priority over vehicles. Common Mistakes to Avoid Failing to stop for pedestrians already on the crossing Driving through the crossing at normal speed Overtaking stopped vehicles at the crossing Not scanning for pedestrians before entering the area Safety Tips Approach crossings at reduced speed Always check for pedestrians on both sides of the road Be especially cautious near schools and bus stops Stop completely when pedestrians are crossing Penalties for Ignoring the Marking Ignoring pedestrian crossing markings may result in: Fines for failing to yield to pedestrians Serious pedestrian collisions Charges for negligent or reckless driving Legal liability in accidents involving pedestrians Summary The block pedestrian crossing marking in South Africa indicates a designated pedestrian priority zone. Drivers must slow down, remain alert, and give way to pedestrians at all times within the crossing area.