On any road.

The purpose of guidance signs is to help you with your navigation by giving early indications that you will soon reach a particular place.

Decide the direction you wish to follow and safely navigate your way into the correct lane in advance.

Overview The Overhead Freeway Direction Signs (South Africa) – Overhead Pre-Advance Exit Direction Sign are large overhead guidance signs placed well before a freeway exit. They provide early notice of upcoming exits, route numbers, destinations, and lane requirements so drivers can prepare safely in advance. What the Sign Means An overhead pre-advance exit direction sign warns drivers ahead of time that an exit is approaching and indicates which lanes should be used to reach specific destinations or routes. The key purpose is: to give drivers early freeway exit information so they can safely move into the correct lane before reaching the interchange. How It Works in Practice The sign is mounted above the roadway for maximum visibility. It appears well before the actual exit point. It shows route numbers, destinations, and lane assignments. It helps drivers prepare gradually for upcoming lane changes. Driver Responsibilities Read the sign early and decide which route you want to follow Move into the correct lane well before the exit Avoid sudden or aggressive lane changes Maintain awareness of surrounding traffic while repositioning Where You Will See This Sign Major freeways and highways Busy urban interchanges Multi-lane freeway approaches to exits High-speed roads with complex lane arrangements Purpose of the Sign Overhead pre-advance exit direction signs improve freeway safety and traffic flow by giving drivers sufficient time to prepare for exits, reducing confusion and dangerous last-minute manoeuvres. Common Mistakes to Avoid Ignoring the sign until too late Changing lanes abruptly near the exit Missing the correct lane assignment Braking suddenly on the freeway to reach an exit Safety Tips Scan overhead signs continuously while driving on freeways Plan your lane changes early and smoothly Keep a safe following distance in heavy traffic Use indicators clearly before changing lanes Summary Overhead pre-advance exit direction signs in South Africa provide early freeway exit guidance, helping drivers select the correct lane safely and prepare for upcoming route changes long before reaching the interchange.

On any freeway.

To indicate that the freeway splits ahead and that the lanes lead to different destinations as indicated.

Signal in time and make sure you are in the right-hand lane if you want to turn right to join the freeway.

Overview The Overhead Freeway Direction Signs (South Africa) – Overhead Supplementary Exit / Through Direction is a guidance sign mounted above the freeway to indicate that the road splits ahead and that different lanes lead to different destinations. It helps drivers choose the correct lane early and safely. What the Sign Means This sign informs drivers that the freeway will divide ahead, with specific lanes leading to different routes or destinations. It provides clear lane-by-lane guidance to avoid confusion and unsafe lane changes. How It Works in Practice Mounted overhead for maximum visibility on freeways. Shows which lanes continue straight and which lanes exit or split. Indicates destinations linked to each lane. Helps drivers position themselves correctly before the split. Driver Responsibilities Read the overhead sign early and understand your route Signal in good time before changing lanes Move into the correct lane well before the split Maintain a safe speed and following distance Where You Will See This Sign This sign is commonly found: On major freeways and motorway interchanges Before freeway splits and multi-route junctions At complex urban highway systems Near exits leading to different towns or routes Purpose of the Sign The purpose of the overhead supplementary exit/through direction sign is to improve traffic flow and safety by clearly showing lane-specific directions before a freeway splits, reducing confusion and dangerous last-minute manoeuvres. Common Mistakes to Avoid Ignoring lane-specific directions Changing lanes too late near the split Braking suddenly after noticing the sign late Following other vehicles without checking the sign Safety Tips Scan overhead signs well ahead on the freeway Decide early which route you need Avoid weaving between lanes Stay alert for other drivers making sudden changes Penalties and Risks for Ignoring Guidance Ignoring overhead exit/through direction signs may result in: Missing your intended route or exit Unsafe lane changes at high speed Increased risk of freeway collisions Traffic congestion at major interchanges Summary The overhead supplementary exit/through direction sign in South Africa helps drivers safely navigate freeway splits by showing which lanes lead to which destinations, improving safety and traffic flow on high-speed roads.

On the left-hand side of a road.

To point out the direction you must follow to reach the more important route.

Follow the traffic signs if you want to join the more important route and look out for the next trailblazer.

Overview The Route Marker Signs (South Africa) – Advance Trailblazer is a guidance sign placed before a junction to help drivers prepare to follow a designated or more important route ahead. What the Sign Means This sign gives early direction guidance, showing drivers which way to turn or proceed in order to join a major or priority route. It is an advance indication before the actual turning point. How It Works in Practice Placed ahead of a junction or intersection. Indicates the direction of a major or priority route. Helps drivers prepare early for lane positioning. Usually followed by additional confirmation signs (trailblazers). Driver Responsibilities Observe the sign early and plan your lane position Follow the indicated direction to reach the main route Look out for follow-up trailblazer signs Signal in time before changing direction or lanes Where You Will See This Sign This sign is commonly found: Before intersections leading to major highways At junctions connecting regional and national routes Along urban roads approaching main arterials Near complex junctions requiring advance guidance Purpose of the Sign The purpose of the advance trailblazer sign is to provide early directional guidance, helping drivers safely and correctly reach more important or primary routes without last-minute lane changes or confusion. Common Mistakes to Avoid Ignoring early route guidance and missing the turn Changing lanes too late at the junction Confusing trailblazer directions with other road signs Failing to prepare for upcoming intersections Safety Tips Start positioning your vehicle early after seeing the sign Reduce speed when approaching junctions Follow all sequential trailblazer signs carefully Use mirrors and signals before changing lanes Penalties and Risks for Ignoring Guidance Ignoring advance route guidance may result in: Missing important exits or routes Unsafe late lane changes causing collisions Increased travel time and confusion Traffic disruption at busy intersections Summary The advance trailblazer sign in South Africa provides early directional guidance to help drivers safely reach major routes. It allows time to prepare for turns and reduces sudden lane changes at intersections.

On any road.

The purpose of guidance signs is to help you with your navigation by giving early indications that you will soon reach a particular place.

Overview The Route Marker Signs (South Africa) – Advance Transport Trailblazer are guidance signs used to give early directional information about important transport routes ahead. They help drivers prepare for upcoming route choices before reaching junctions or turn-offs. What the Sign Means An advance transport trailblazer sign indicates that a specific transport route, destination, or major roadway is approaching and will soon require a navigation decision. It acts as an early guide for route selection. The key purpose is: to provide early navigation guidance so drivers can prepare to follow a designated transport route or direction. How It Works in Practice The sign appears well before the actual turn-off or interchange. It indicates upcoming access to a named route or transport corridor. It helps drivers move into the correct lane in advance. It reduces sudden or last-minute lane changes. Driver Responsibilities Pay attention to advance route information early Choose the correct lane before reaching the junction Follow all directional signage leading to the route Avoid last-minute lane changes in heavy traffic Where You Will See This Sign Approaches to major highways and freeways Urban arterial roads connecting to transport corridors Intersections leading to national or regional routes Complex junctions requiring early lane selection Purpose of the Sign Advance transport trailblazer signs improve navigation and traffic flow by giving early warnings of important route decisions, helping drivers position themselves safely and correctly before reaching junctions. Common Mistakes to Avoid Ignoring early route guidance and missing exits Making sudden lane changes at the last moment Misreading or confusing route directions Failing to prepare for complex junctions in advance Safety Tips Read advance route signs as early as possible Position your vehicle in the correct lane early Reduce speed when approaching busy interchanges Stay alert for additional directional confirmation signs Summary Advance transport trailblazer signs in South Africa guide drivers toward upcoming transport routes by giving early directional information. They improve safety and navigation by allowing drivers to prepare well before reaching junctions.

On any road.

The purpose of guidance signs is to help you with your navigation by giving early indications that you will soon reach a particular place.

Overview The Route Marker Signs (South Africa) – Tourism Route Marker is a guidance sign used to identify designated tourism routes that guide drivers to areas of scenic, cultural, historical, or recreational interest. What the Sign Means This sign indicates that you are on or approaching an officially recognised tourism route. These routes are designed to help visitors easily navigate to attractions and points of interest. How It Works in Practice Marks routes that pass through tourist attractions or scenic areas. Helps drivers follow a structured sightseeing path. Often combined with direction and information signs. May cover multiple destinations along a single route. Driver Responsibilities Follow directional tourism signage carefully Drive at safe speeds, especially in scenic or unfamiliar areas Be alert for pedestrians, cyclists, and stopping vehicles Respect local road rules and environmental areas Where You Will See This Sign This sign is commonly found: Along scenic coastal, mountain, or rural routes Near national parks and heritage sites On designated cultural or historical travel routes At the start and along major tourism corridors Purpose of the Sign The purpose of the tourism route marker is to assist navigation while promoting travel to attractions, ensuring that drivers can safely and easily follow designated sightseeing routes. Common Mistakes to Avoid Driving too fast while viewing scenery Ignoring additional warning or direction signs Stopping in unsafe areas to view attractions Missing route markers and getting off the tourism route Safety Tips Reduce speed on scenic or unfamiliar roads Use designated stopping areas for sightseeing Watch for pedestrians and wildlife near attractions Follow all tourism route guidance signs Penalties and Risks for Ignoring Guidance Ignoring tourism route guidance may result in: Getting lost or missing attractions Unsafe stopping or parking in scenic areas Increased accident risk in tourist zones Traffic disruption in popular destinations Summary The tourism route marker in South Africa helps drivers follow designated scenic and cultural routes safely. It supports navigation while encouraging safe travel through tourist destinations.

On any road.

The purpose of guidance signs is to help you with your navigation by giving early indications that you will soon reach a particular place.

Overview The Route Marker Signs (South Africa) – SADC Route Marker Sign are guidance signs used to identify regional routes that form part of the Southern African Development Community (SADC) road network. These routes connect South Africa with neighbouring countries and support cross-border travel. What the Sign Means An SADC route marker indicates that you are travelling on, or approaching, a regional cross-border route that is part of the broader Southern African transport corridor system. The key purpose is: to assist navigation by identifying regional SADC routes and confirming that the road forms part of an international transport network. How It Works in Practice The sign displays a designated SADC route number or symbol. It confirms that the road is part of a regional cross-border system. It helps drivers follow long-distance international routes. It often appears along major highways leading to border posts. Driver Responsibilities Follow route markers carefully to stay on the correct corridor Be prepared for border post procedures if travelling internationally Plan fuel, rest, and documentation for long-distance travel Observe all national and cross-border traffic regulations Where You Will See This Sign Major national highways linking to neighbouring countries Approaches to border posts Regional transport corridors within South Africa Freight and logistics routes forming part of SADC networks Purpose of the Sign SADC route marker signs improve navigation by identifying regional transport corridors, helping drivers stay on correct cross-border routes and supporting efficient movement of people and goods across Southern Africa. Common Mistakes to Avoid Missing route changes on long-distance highways Ignoring additional border or customs signage Failing to prepare for international travel requirements Confusing regional routes with local roads Safety Tips Follow route markers consistently on long journeys Check documentation before approaching border areas Take regular rest breaks on long-distance routes Stay alert for heavy truck and freight traffic Summary SADC route marker signs in South Africa identify regional transport corridors that connect to neighbouring countries. They help drivers navigate long-distance and cross-border routes safely and efficiently.

At the intersection of toll and alternative routes

To point out that a route other than the toll route can be followed

Decide in advance whether you want to take the toll or alternative route. If you want to take the alternative route, slow down for the intersection. Remember that the alternative route is usually not of the same high standard as the toll route

Overview The Route Marker Signs (South Africa) – Alternative Route Marker Sign is a guidance sign used at intersections where drivers can choose between a toll route and a non-toll alternative route. It helps motorists make an informed routing decision before reaching the junction. What the Sign Means This sign indicates that an alternative (non-toll) route is available in addition to the main toll route. Drivers must choose their preferred route in advance and position their vehicle accordingly. The key instruction is: decide early whether to take the toll route or the alternative route, and prepare to turn or proceed safely at the intersection. The key purpose is: to guide road users by clearly distinguishing between toll and non-toll route options at decision points. How It Works in Practice The sign is placed before or at junctions where routes split. It identifies an alternative route alongside a toll route option. It allows drivers to choose based on cost, distance, or preference. It warns that alternative routes may differ in quality or standard from toll roads. Driver Responsibilities Make your route decision early before reaching the intersection Slow down when approaching the decision point Position your vehicle in the correct lane in advance Follow signage clearly to avoid last-minute lane changes Where You Will See This Sign Highway interchanges near toll plazas Major route splits between toll and free roads Regional highways with alternative bypass routes Urban freeway decision points Purpose of the Sign Alternative route marker signs improve traffic management by clearly separating toll and non-toll travel options, reducing confusion and ensuring safe lane selection at major route decisions. Common Mistakes to Avoid Waiting too long before choosing a route Making sudden lane changes at the intersection Entering the wrong route unintentionally Ignoring differences in road quality between routes Safety Tips Plan your route before reaching the junction Reduce speed when approaching the split Watch for additional directional arrows or signage Stay in your chosen lane and avoid abrupt movements Summary Route Marker “Alternative Route” signs in South Africa guide drivers at toll-road junctions where a free alternative route is available. They improve safety by helping motorists choose and position themselves early for the correct route.

On any road.

The purpose of guidance signs is to help you with your navigation by giving early indications that you will soon reach a particular place.

This sign indicates the direction to a town with a paid toll road. It also indicates the name of the upcoming toll plaza and the fees each class of vehicle will need to pay. Ensure you are ready to stop and pay the required fees.

Overview The Toll Direction Signs (South Africa) – Far-Side Advance Direction Toll Tariff Combination Sign are guidance signs used to inform drivers about an upcoming toll road and toll plaza ahead. These signs also display toll fees for different vehicle classes and indicate the direction toward destinations reached via the toll route. What the Sign Means A far-side advance direction toll tariff combination sign shows that the route ahead includes a toll road. It identifies the upcoming toll plaza, indicates the direction to destinations along that route, and displays the tariffs payable by various vehicle types. The key purpose is: to prepare drivers in advance for a toll route by providing directional guidance and toll payment information. How It Works in Practice The sign is placed before reaching the toll road or interchange. It indicates the route and destination accessible via the toll road. It displays the toll plaza name and charges for different vehicle classes. It allows drivers time to prepare for payment and lane selection. Driver Responsibilities Read the toll information carefully before entering the route Ensure you have the required payment method ready Move into the appropriate toll lane in advance Reduce speed safely when approaching the toll plaza Where You Will See This Sign Approaches to toll roads and toll plazas Major national highways and freeways Interchanges leading to tolled routes Long-distance transport corridors Purpose of the Sign Toll tariff combination signs improve traffic flow and driver preparedness by giving advance notice of toll roads, payment requirements, and route destinations before reaching the toll plaza. Common Mistakes to Avoid Not preparing payment before reaching the toll booth Entering the wrong toll lane Changing lanes suddenly near the toll plaza Ignoring tariff information for your vehicle class Safety Tips Slow down gradually when approaching toll plazas Keep a safe distance from vehicles ahead Have cash, card, or electronic payment ready in advance Watch for lane signs indicating manual or electronic payment lanes Summary Far-side advance direction toll tariff combination signs in South Africa provide early warning of toll roads, showing directions, toll plaza names, and vehicle tariffs. They help drivers prepare safely for payment and route decisions before reaching the toll area.

On the left hand side of the road about 750 m after entering a freeway and after that every 5 to 10 km.

To confirm that you are on your way to the places as indicated and that these destinations are at the distances indicated.

Take note of the destinations and in particular note the distances to plan your trip to fill up with fuel and rest.

Overview The Toll Direction Signs (South Africa) – Confirmation Alternative Route (Class A1) is a freeway guidance sign used to confirm that drivers are travelling on the correct route toward the destinations shown on the sign. It also provides the remaining distances to those destinations. What the Sign Means This sign confirms that you are on the correct toll or freeway route and shows the names of towns, cities, or destinations ahead together with their distances. It helps drivers monitor progress and plan the remainder of their journey. How It Works in Practice Placed about 750 m after entering a freeway and repeated every 5–10 km. Lists destinations and the distances remaining to each one. Confirms route continuity on long-distance roads. Helps drivers plan fuel stops, rest breaks, and travel time. Driver Responsibilities Read the destinations and distances carefully Use the information to confirm you are on the correct route Plan fuel, food, and rest stops according to the distances shown Remain alert and continue following freeway guidance signs Where You Will See This Sign This sign is commonly found: On major toll roads and freeways After freeway entry points Along long-distance national routes At intervals between major towns and cities Purpose of the Sign The purpose of the confirmation alternative route sign is to reassure drivers that they are travelling on the correct freeway route while providing distance information to help with navigation and trip planning. Common Mistakes to Avoid Ignoring distance information and running low on fuel Misreading destinations at freeway speed Failing to plan rest stops on long journeys Assuming all upcoming exits lead directly to listed destinations Safety Tips Monitor fuel levels during long-distance travel Take regular rest breaks to avoid fatigue Check navigation and signage regularly Keep a safe following distance on freeways Penalties and Risks for Ignoring Guidance Ignoring confirmation route signs may result in: Navigation errors and missed routes Running out of fuel in remote areas Driver fatigue from poor trip planning Unnecessary delays during travel Summary The confirmation alternative route sign in South Africa reassures drivers that they are on the correct freeway route while displaying distances to upcoming destinations, helping with safe and efficient trip planning.

On the left-hand side of any road

To indicate that there is an exit about 300m, 200m and 100m ahead.

This sign indicates an off-ramp in 100 meters. If possible enter the exit at the same speed as the maximum speed for that road.

Overview The Information Signs (South Africa) – Countdown Sign are placed on the left-hand side of roads, especially highways and freeways, to inform drivers of an upcoming exit (off-ramp) and the distance remaining before it. What the Sign Means Countdown signs typically appear in stages (for example 300 m, 200 m, and 100 m) to guide drivers as they approach an exit. The final sign indicates that the off-ramp is approximately 100 metres ahead. The key purpose is: to warn drivers of an approaching exit and help them prepare to safely leave the main road at the correct point. How It Works in Practice Multiple signs appear at decreasing distances before the exit. Drivers are given time to move into the correct lane. The final countdown sign indicates the exit is very close (about 100 m). Safe merging into the off-ramp is required at the appropriate speed. Driver Responsibilities Start preparing for the exit as soon as countdown signs appear Move into the correct lane early if necessary Reduce speed smoothly before entering the off-ramp if required Do not make sudden lane changes near the exit Where You Will See This Sign On highways and freeways before major exits At urban freeway interchanges Near toll roads or major junctions Where high-speed roads require advance exit preparation Purpose of the Sign Countdown signs help drivers safely prepare for exits by giving clear distance information, reducing sudden lane changes and improving traffic flow near off-ramps. Common Mistakes to Avoid Missing early countdown signs and reacting too late Crossing multiple lanes suddenly near the exit Braking sharply on the main carriageway Exiting at unsafe speeds or angles Safety Tips Plan your exit in advance Signal early before changing lanes Maintain steady speed until safely in the off-ramp lane Adjust speed only once you are in the exit lane Penalties for Ignoring the Sign Ignoring countdown signage may result in: Dangerous last-minute lane changes Collisions with other vehicles Missed exits leading to unsafe driving maneuvers Traffic violations for reckless driving Summary Countdown signs in South Africa warn drivers of an approaching exit and help them prepare in advance. Drivers should plan early, move into the correct lane safely, and adjust speed smoothly when exiting the freeway.

On the left-hand side of any road

To indicate that there is an exit about 300m, 200m and 100m ahead.

This sign indicates an off-ramp in 200 meters. If possible enter the exit at the same speed as the maximum speed for that road.

Overview The Information Signs (South Africa) – Countdown Sign is used on highways and major roads to inform drivers how far they are from an upcoming exit or off-ramp. It is usually placed on the left-hand side of the road. What the Sign Means This sign indicates the distance remaining before an exit, typically shown in stages such as 300m, 200m, and 100m. A countdown sign helps drivers prepare in advance to safely change lanes and exit the roadway. How It Works in Practice Gives advance warning of an upcoming off-ramp. Helps drivers plan lane changes safely. Reduces sudden braking or last-minute decisions. Indicates progressively closer distances to the exit. Driver Responsibilities Start preparing to exit as soon as you see the first countdown sign Move into the correct lane early Maintain a safe and steady speed Avoid sudden lane changes near the exit Where You Will See This Sign This sign is commonly found: On highways and freeways Approaching major interchanges Near urban off-ramps and exit routes On multi-lane roads with controlled access exits Purpose of the Sign The purpose of the countdown sign is to guide drivers in preparing for an upcoming exit, improving traffic flow and reducing last-second lane changes that could cause accidents. Common Mistakes to Avoid Waiting too long before changing lanes Braking suddenly at the exit point Missing the exit due to poor lane planning Crossing multiple lanes at the last moment Safety Tips Plan your exit early when you see the first countdown marker Match your speed with surrounding traffic Use indicators in good time before changing lanes Stay calm and avoid rushed movements Penalties for Ignoring the Sign Ignoring countdown signs may result in: Missed exits and unsafe reversing or weaving Collisions from sudden lane changes Traffic disruption on high-speed roads Fines for unsafe driving behaviour Summary The countdown sign in South Africa provides advance warning of an upcoming exit. Drivers must prepare early, change lanes safely, and maintain appropriate speed to exit smoothly and safely.

On the left-hand side of any road

To indicate that there is an exit about 300m, 200m and 100m ahead.

This sign indicates an off-ramp in 300 meters. If possible enter the exit at the same speed as the maximum speed for that road.

Overview The Information Signs (South Africa) – Countdown Sign are placed on the left-hand side of highways and major roads to inform drivers that an exit (off-ramp) is approaching and to show the remaining distance to it. What the Sign Means Countdown signs are displayed in sequence (typically 300 m, 200 m, and 100 m) to help drivers prepare in advance for leaving the main road. This specific sign indicates that the off-ramp is approximately 300 metres ahead, giving drivers early notice to prepare for the exit. The key purpose is: to warn drivers of an upcoming exit and give advance distance information to allow safe lane positioning and smooth exiting. How It Works in Practice The first countdown sign appears about 300 m before the exit. Additional signs follow at 200 m and 100 m. Drivers use the distance markers to prepare for lane changes. The exit becomes progressively closer with each sign. Driver Responsibilities Start planning your exit when you see the 300 m sign Move into the correct lane early and safely Maintain steady speed on the main carriageway Only adjust speed once in the exit lane if needed Where You Will See This Sign On freeways and highways before off-ramps At major urban interchanges Near toll roads and high-speed exits Where advance warning is needed for safe exiting Purpose of the Sign Countdown signs are designed to improve road safety by giving drivers early and clear distance information so they can position themselves correctly and exit safely without sudden lane changes or braking. Common Mistakes to Avoid Ignoring the early 300 m warning Changing lanes too late near the exit Sudden braking on fast-moving traffic lanes Crossing multiple lanes in a short distance Safety Tips Plan your exit as soon as you see the first countdown sign Signal early when changing lanes Keep a steady speed while positioning yourself Only reduce speed once safely in the exit lane Penalties for Ignoring the Sign Ignoring countdown signs may lead to: Unsafe last-minute lane changes Collisions with nearby vehicles Missing exits and making dangerous corrections Traffic violations for reckless driving behaviour Summary The 300 m countdown sign in South Africa warns drivers of an upcoming exit and gives early distance guidance. Drivers should prepare in advance, change lanes safely, and exit smoothly without sudden movements.

Displayed on the left-hand side of any road.

To inform you that the road ahead or the road to the left or right ends.

Do not turn in at such a road unless you are going to a destination in the road that ends.

Overview The Information Signs (South Africa) – Cul-de-Sac Sign is used on public roads to inform drivers that a road ahead, or a side road to the left or right, ends in a dead end with no through access. What the Sign Means This sign indicates that the road does not continue beyond a certain point and will terminate in a closed end or turning area. Drivers should only enter if they intend to access a destination within that road. How It Works in Practice The road leads to a dead end with no exit through traffic. Vehicles must turn around within the cul-de-sac. There is no connection to other roads beyond the endpoint. Traffic is usually local or residential only. Driver Responsibilities Check whether your destination is within the cul-de-sac Avoid entering if you are just passing through Drive slowly when entering residential dead-end roads Be prepared to turn around safely at the end Where You Will See This Sign This sign is commonly found: In residential suburbs and housing estates On short access roads or service roads In industrial or private property areas At the entrance to dead-end streets Purpose of the Sign The purpose of the cul-de-sac sign is to inform drivers that a road does not continue through, helping them avoid unnecessary entry and improving traffic flow and navigation efficiency. Common Mistakes to Avoid Entering expecting a through route Driving too fast into residential dead ends Ignoring that turning around will be required Confusing cul-de-sacs with through streets Safety Tips Slow down when entering unfamiliar side roads Confirm your destination is within the road before entering Watch for pedestrians and parked vehicles Turn around carefully at the end of the road Penalties for Ignoring the Sign Ignoring cul-de-sac information may result in: Unnecessary detours and delays Unsafe reversing or turning at the dead end Traffic congestion in narrow residential roads Minor property or vehicle damage Summary The cul-de-sac sign in South Africa informs drivers that a road ends ahead with no through route. Drivers should only enter if necessary and be prepared to turn around safely at the end.

Displayed on the left-hand side of any road.

To inform you that the road ahead or the road to the left or right ends.

Do not turn in at such a road unless you are going to a destination in the road that ends.

Overview The Information Signs (South Africa) – Cul-de-Sac Sign is used on roads to inform drivers that a road ahead, or a side road to the left or right, ends in a dead end with no through traffic. What the Sign Means This sign indicates that the road does not continue beyond the endpoint. It serves as a navigation warning that entry should only be made if the driver’s destination is within that road. How It Works in Practice The road terminates at a dead end. There is no connection to other through roads. Vehicles must turn around at the end of the street. Traffic is typically local or residential only. Driver Responsibilities Confirm your destination is within the cul-de-sac before entering Avoid entering if you are just passing through Drive slowly in residential or narrow dead-end roads Be prepared to turn around safely at the end Where You Will See This Sign This sign is commonly found: In residential suburbs and housing developments On short access or service roads In industrial estates or private property areas At entrances to dead-end streets Purpose of the Sign The purpose of the cul-de-sac sign is to warn drivers that a road ends ahead, helping them avoid unnecessary entry and ensuring smoother traffic flow and safer navigation. Common Mistakes to Avoid Entering expecting a through route Driving too fast into dead-end streets Ignoring the need to turn around at the end Confusing cul-de-sacs with connecting roads Safety Tips Slow down when entering unfamiliar roads Check whether your destination is located within the road Watch for pedestrians and parked vehicles Turn around carefully and safely at the end Penalties for Ignoring the Sign Ignoring this information may result in: Unnecessary detours or delays Unsafe reversing or turning maneuvers Minor traffic congestion in narrow streets Potential minor property or vehicle damage Summary The cul-de-sac sign in South Africa warns drivers that a road does not continue beyond a certain point. Drivers should only enter if necessary and be prepared to turn around safely at the end of the road.

Displayed on the left-hand side of any road.

To inform you that the road ahead or the road to the left or right ends.

Do not turn in at such a road unless you are going to a destination in the road that ends.

Overview The Information Signs (South Africa) – Cul-de-Sac Sign is used on public roads to indicate that a road ahead, or a side road to the left or right, does not continue and ends in a dead end. What the Sign Means This sign informs drivers that there is no through route beyond the indicated road. The road terminates, and vehicles entering it will need to turn around to exit. How It Works in Practice The road ends in a dead-end or turning area. No continuation to other roads is available. Only local access traffic usually uses the road. Drivers must reverse or turn around to leave. Driver Responsibilities Only enter if your destination is within the cul-de-sac Do not enter expecting a through route Drive slowly in narrow or residential dead-end roads Be prepared to turn safely at the end Where You Will See This Sign This sign is commonly found: In residential suburbs and housing estates On short access roads or service roads In industrial or private developments At entrances to dead-end streets Purpose of the Sign The purpose of the cul-de-sac sign is to inform drivers that a road has no exit, helping them avoid unnecessary entry and improving traffic flow and safety in residential or restricted areas. Common Mistakes to Avoid Entering while expecting a connecting road Driving too fast into dead-end streets Failing to plan for turning around at the end Confusing cul-de-sacs with through roads Safety Tips Slow down when entering unfamiliar side roads Check if your destination is located within the street Watch for pedestrians and parked vehicles Turn around carefully at the end of the road Penalties for Ignoring the Sign Ignoring this warning may result in: Unnecessary detours and delays Unsafe reversing or turning manoeuvres Minor congestion in narrow residential streets Possible minor property or vehicle damage Summary The cul-de-sac sign in South Africa warns drivers that a road ends ahead with no through access. Drivers should only enter if necessary and be prepared to turn around safely at the end.

On any road.

To inform you that you have the right of way at the intersection ahead.

Do not slow down unnecessarily, but make sure that other traffic will yield.

Overview The Information Signs (South Africa) – Right of Way Sign are used on public roads to inform drivers that they have priority at an upcoming intersection. This means other traffic is required to yield to them. What the Sign Means This sign indicates that your vehicle has the right of way at the intersection ahead, and cross-traffic or joining traffic must give way. The key purpose is: to inform drivers that they have priority at the intersection and may proceed, provided it is safe to do so. How It Works in Practice The road you are travelling on has priority at the intersection. Other roads must yield or stop for your traffic flow. Traffic control markings or signs support this priority. Right of way does not remove the need for caution. Driver Responsibilities Proceed without unnecessary slowing if the way is clear Remain alert for vehicles that may fail to yield Be prepared to slow down or stop if needed Check all directions before entering the intersection Where You Will See This Sign At priority intersections on main roads On arterial routes crossing smaller roads In urban and suburban road networks Where traffic flow is regulated to favour a main route Purpose of the Sign The right of way sign is used to improve traffic flow by clearly indicating which road has priority at an intersection, reducing confusion and helping vehicles move smoothly through junctions. Common Mistakes to Avoid Assuming all vehicles will automatically yield Driving too fast into intersections without checking Ignoring cross traffic that fails to obey rules Failing to remain alert at junctions Safety Tips Maintain a safe and controlled speed Scan the intersection before proceeding Be ready to react to unpredictable drivers Do not assume right of way guarantees safety Penalties for Ignoring Rules Even with right of way, unsafe driving may result in: Collisions if other drivers fail to yield or you proceed recklessly Fines for negligent or dangerous driving Liability in intersection accidents Traffic violations if control rules are ignored Summary The right of way sign in South Africa informs drivers that they have priority at an intersection. However, drivers must still remain cautious and ensure the intersection is clear before proceeding.

At the entrance to a parking area.

To inform you of the existence of a park-and-ride terminus that has a bus or train service.

Stop in this parking area if you want to reach your destination using other transport.

Overview The Information Signs (South Africa) – Park and Ride Sign is used at the entrance to designated parking areas that connect with public transport services such as buses or trains. What the Sign Means This sign informs drivers that there is a park-and-ride facility ahead where they can park their vehicle and continue their journey using public transport. It is designed to reduce traffic congestion and encourage shared transport use. How It Works in Practice Drivers park their private vehicles in a secure facility. They transfer to buses, trains, or shuttle services. The system helps reduce traffic into busy urban areas. It is often linked to major transport routes or city centres. Driver Responsibilities Enter the parking area if you intend to use public transport Follow parking rules and signage within the facility Ensure your vehicle is securely parked before leaving Be aware of public transport schedules and routes Where You Will See This Sign This sign is commonly found: At entrances to park-and-ride facilities Near train stations and bus terminals On the outskirts of major cities Along highways leading into urban centres Purpose of the Sign The purpose of the park-and-ride sign is to guide drivers to designated parking areas where they can switch to public transport, helping to reduce traffic congestion and improve commuting efficiency. Common Mistakes to Avoid Entering without understanding the transport connection Parking outside designated areas Leaving valuables visible in parked vehicles Confusing park-and-ride areas with general parking lots Safety Tips Follow all signage within the facility Lock your vehicle before leaving it Use only official transport services linked to the site Be aware of pedestrian movement around transport hubs Penalties for Ignoring the Sign Ignoring park-and-ride instructions may result in: Parking violations or fines Towing of improperly parked vehicles Restricted access to transport services Traffic congestion in surrounding areas Summary The park-and-ride sign in South Africa informs drivers of a facility where they can park and transfer to public transport. It helps reduce congestion and supports efficient urban travel.

Below another sign.

To indicate a recommended speed on this road.

As far as possible, attempt to travel at the recommended speed.

Overview The Information Signs (South Africa) – Supplementary Plate Sign are displayed below another road sign to provide additional information, most commonly a recommended speed for a specific section of road. What the Sign Means This sign does not impose a legal speed limit. Instead, it gives a recommended or advised speed that is considered safe for the road conditions ahead, such as curves, slopes, or hazards. The key purpose is: to inform drivers of a recommended safe speed and encourage them to adjust their driving accordingly. How It Works in Practice The plate is placed directly under another warning or regulatory sign. It indicates a suggested speed based on road conditions. It is especially useful on curves, descents, or complex intersections. The recommendation is based on safety, not enforcement. Driver Responsibilities Adjust speed to match road conditions where possible Use extra caution if conditions are wet, dark, or unfamiliar Do not treat the recommendation as a fixed legal limit Maintain full control of the vehicle at all times Where You Will See This Sign At sharp curves or winding roads On steep descents or ascents Near hazardous or complex intersections In temporary roadwork or changed road conditions Purpose of the Sign Supplementary plate signs help improve road safety by giving drivers clear guidance on appropriate speeds for specific conditions, reducing the risk of accidents in challenging areas. Common Mistakes to Avoid Ignoring recommended speeds entirely Treating the advisory speed as a legal requirement Maintaining high speed in hazardous conditions Failing to adjust for weather or visibility Safety Tips Slow down in advance of the sign Match your speed to road and weather conditions Use engine braking on descents where necessary Stay alert for additional warning signs Penalties for Ignoring the Sign While not legally enforceable as a speed limit, ignoring recommended speeds may result in: Loss of vehicle control Increased risk of collisions Liability in accident investigations Possible fines if driving is deemed negligent or reckless Summary The supplementary plate sign in South Africa provides recommended speed guidance beneath other signs. Drivers should adjust their speed where possible to match road conditions and maintain safe vehicle control.

Below another sign.

To indicate that the restriction applies for the next 12km.

Comply with the rules for the next 12km.

Overview The Information Signs (South Africa) – Supplementary Plate Sign is used beneath a main traffic sign to provide additional information about how long a restriction or instruction applies. What the Sign Means This sign indicates that the rule, warning, or restriction shown on the main sign continues for a specified distance — in this case, 12 kilometres. Drivers must comply with the instruction for the entire stated distance. How It Works in Practice It is not a standalone sign but supports another traffic sign. It defines the distance over which a rule applies. The restriction remains active until the distance ends. It helps drivers understand how long to follow a specific instruction. Driver Responsibilities Observe the main sign and its instruction carefully Apply the rule continuously for the full 12 km Do not assume the restriction ends early Stay alert for updated or ending signage Where You Will See This Sign This sign is commonly found: On highways and long rural roads In areas with extended speed or hazard zones Near roadworks or maintenance stretches Along routes with environmental or safety restrictions Purpose of the Sign The purpose of the supplementary plate sign is to clearly communicate the distance over which a traffic rule applies, helping drivers maintain compliance and avoid confusion on long road sections. Common Mistakes to Avoid Assuming the restriction ends sooner than indicated Ignoring the main sign while focusing only on distance Speeding up before the restriction ends Failing to watch for updated signage Safety Tips Remember that both the main sign and plate must be read together Maintain consistent driving behaviour for the full distance Stay alert for changing road conditions Adjust speed gradually rather than abruptly Penalties for Ignoring the Sign Ignoring a supplementary plate instruction may result in: Speeding or traffic violations Increased risk of accidents in controlled zones Fines for non-compliance with road regulations Endangering other road users in restricted areas Summary The supplementary plate sign in South Africa provides important distance-based instructions for traffic rules. Drivers must follow the associated main sign’s instruction for the full indicated distance of 12 km.

Below another sign.

To indicate that the restriction applies for the next 200m.

Comply with the rules for the next 200m.

Overview The Information Signs (South Africa) – Supplementary Plate Sign are placed below another road sign to provide extra details about how far a restriction or instruction applies. What the Sign Means This specific supplementary plate indicates that the restriction shown on the main sign applies for the next 200 metres of road. After that distance, the restriction may end or change. The key purpose is: to inform drivers that a specific road rule or restriction must be followed for a distance of 200 metres. How It Works in Practice The main sign shows a rule or restriction (e.g. speed, no overtaking, hazard warning). The supplementary plate indicates how far that rule applies. In this case, the condition applies for the next 200 m. After 200 m, normal driving conditions may resume or change. Driver Responsibilities Follow the main sign’s instruction immediately Maintain compliance for the full 200 m distance Stay alert for follow-up signs indicating changes Adjust speed or behaviour as required throughout the zone Where You Will See This Sign Roadwork or temporary construction zones Hazardous road sections (curves, narrow roads, etc.) Speed control or enforcement areas Areas with short-term traffic restrictions Purpose of the Sign Supplementary distance plates help drivers understand exactly how long a road restriction applies, reducing confusion and improving compliance with temporary or situational traffic rules. Common Mistakes to Avoid Ignoring the distance limitation Returning to normal driving too early Failing to notice follow-up warning signs Maintaining unsafe speed within the restricted zone Safety Tips Observe the main sign and apply its rule immediately Maintain safe driving for the full 200 m distance Watch for additional signage beyond the restriction zone Drive cautiously even when the restriction ends Penalties for Ignoring the Sign Ignoring distance-based restrictions may result in: Traffic fines for non-compliance Increased risk of accidents in controlled zones Liability in roadwork or hazard incidents Possible prosecution for reckless driving Summary The supplementary plate sign in South Africa indicates that a restriction applies for the next 200 metres. Drivers must follow the main sign’s instruction carefully for the full distance before returning to normal driving conditions.

Below another sign.

To give more information about the main message on regulatory, warning or diagrammatical guidance signs.

Pay attention to these signs in order to realise what the danger is, what a safe speed is, how far away the danger is and the distance the danger will continue.

Overview The Information Signs (South Africa) – Supplementary Plate Sign is a secondary sign placed below a main regulatory, warning, or guidance sign to provide extra details that help drivers understand the situation more clearly. What the Sign Means This sign adds important supporting information to the main sign above it. It helps explain the nature of a hazard, the distance to it, the duration of a restriction, or the appropriate driving response. How It Works in Practice It is always used together with a main road sign. It provides clarification such as distance, time, or extent of a hazard. It may indicate how far a danger extends or how long a rule applies. It helps drivers make better and safer decisions. Driver Responsibilities Read both the main sign and the supplementary plate together Adjust speed and driving behaviour based on the combined message Pay attention to distances or duration indicated Stay alert for continued or changing conditions Where You Will See This Sign This sign is commonly found: Below warning signs (e.g., curves, hazards, roadworks) Under regulatory signs (e.g., speed limits or restrictions) With directional or guidance signs In construction or temporary traffic control zones Purpose of the Sign The purpose of the supplementary plate sign is to provide additional clarity to a main traffic sign, helping drivers understand exactly what the hazard or rule involves, how far it applies, and how they should respond. Common Mistakes to Avoid Ignoring the supplementary plate and only reading the main sign Misjudging the distance or duration of a restriction Failing to adjust speed based on added information Assuming the main sign alone provides all necessary detail Safety Tips Always read both signs together as one instruction Adjust speed early based on full information Pay attention to distance and hazard extent Stay alert for additional or updated signage ahead Penalties for Ignoring the Sign Ignoring supplementary information may result in: Speeding or regulatory violations Accidents due to misunderstanding road conditions Fines for non-compliance with traffic instructions Increased risk in hazardous driving areas Summary The supplementary plate sign in South Africa provides essential extra information to a main traffic sign. Drivers must read both together to understand hazards, distances, and restrictions, and adjust their driving accordingly.

Below another sign.

To give more information about the main message on regulatory, warning or diagrammatical guidance signs.

Pay attention to these signs in order to realise what the danger is, what a safe speed is, how far away the danger is and the distance the danger will continue.

Overview The Information Signs (South Africa) – Supplementary Plate Sign are placed directly below a main road sign to provide extra details that help drivers better understand the instruction, warning, or guidance being given. What the Sign Means This type of sign does not stand alone. Instead, it supports a regulatory, warning, or directional sign by giving clearer information such as distance, duration, or specific conditions of a hazard or rule. The key purpose is: to provide additional information that helps drivers understand the nature, distance, speed, or duration of a road condition or instruction. How It Works in Practice It is always placed below another primary road sign. It clarifies what the main sign is warning or instructing about. It may indicate distance to a hazard or how long a rule applies. It can help define safe speeds or road conditions more clearly. Driver Responsibilities Read both the main sign and the supplementary plate together Adjust speed or behaviour according to full information provided Pay attention to distance or duration of hazards Remain alert for changing road conditions ahead Where You Will See This Sign Below warning signs (e.g. curves, hazards, slippery roads) Below regulatory signs (e.g. speed limits, restrictions) At roadworks or temporary traffic control zones On highways, rural roads, and urban intersections Purpose of the Sign Supplementary plates are used to improve road safety by giving drivers precise details about road conditions, helping them understand what to expect and how to respond appropriately. Common Mistakes to Avoid Ignoring the supplementary plate and only reading the main sign Misjudging the distance or duration of a hazard Failing to adjust speed based on full information Overlooking temporary or changing conditions Safety Tips Always read the full sign combination (main + supplementary plate) Adjust speed early when distance warnings are shown Stay alert for multiple signs in sequence Drive cautiously in unfamiliar or changing conditions Penalties for Ignoring the Sign Ignoring supplementary information may result in: Failure to respond correctly to road hazards Traffic fines for non-compliance with restrictions Increased risk of collisions or road incidents Liability in accidents due to negligence Summary The supplementary plate sign in South Africa provides important additional information about a main road sign. Drivers must read both signs together to understand hazards, distances, speeds, and conditions for safe driving.

Next to the entrance of a parking area or in the top right-hand or top lefthand corner of a notice board.

To inform you of the existence of an information office or notice board.

You can obtain information about the area at this sign.

Overview The Information Signs (South Africa) – Information Centre Sign is used to indicate the presence of an information office or notice board where road users and visitors can obtain local guidance or assistance. What the Sign Means This sign informs drivers and pedestrians that an official information point is available nearby. It is intended to help people find directions, local details, or assistance about the surrounding area. How It Works in Practice It marks the location of an information office or kiosk. It may also point to a notice board with local information. It helps visitors orient themselves in unfamiliar areas. Staff or posted notices provide guidance and directions. Driver Responsibilities Use the information centre if you need directions or assistance Park safely if stopping at the facility Follow any instructions provided by signage or staff Be mindful of pedestrians around the area Where You Will See This Sign This sign is commonly found: At tourist attractions and rest areas Near parking facilities and transport hubs At visitor centres in towns or parks On notice boards or information kiosks Purpose of the Sign The purpose of the information centre sign is to guide road users and visitors to a central point where they can access helpful information about the area, improving navigation and visitor experience. Common Mistakes to Avoid Driving past without using available assistance when needed Stopping in unsafe areas near the information point Confusing the sign with regulatory or warning signage Ignoring posted local instructions or notices Safety Tips Use the information centre when travelling in unfamiliar areas Park only in designated areas before seeking assistance Be aware of pedestrians and other visitors nearby Follow all posted local guidance carefully Summary The information centre sign in South Africa indicates a place where road users can obtain local information or assistance. It helps improve navigation and supports safe and informed travel.

On the left-hand side of the carriageway before an intersection.

To inform you that the traffic signals on this route are co-ordinated and that the signals will be green at all the subsequent intersections if you maintain the indicated speed.

If possible maintain the recommended speed. However, make sure that it is safe to enter every intersection and look out for drivers that do not yield. The speed indicated is a recommendation and not a speed limit.

Overview The Information Signs (South Africa) – Co-ordinated Traffic Signal Sign are placed on the left-hand side of the road before intersections where traffic lights are electronically synchronised along a route. What the Sign Means This sign indicates that multiple traffic signals along the route are coordinated (linked together). If a driver maintains the recommended speed, they are more likely to encounter green lights at successive intersections. The key purpose is: to inform drivers that traffic lights are coordinated and that maintaining a recommended speed may allow smoother travel through multiple green signals. How It Works in Practice Traffic signals along the route operate in a timed sequence. Driving at the recommended speed improves the chance of hitting green lights. The system is designed to improve traffic flow and reduce stopping. Conditions can still change due to traffic or pedestrian demand. Driver Responsibilities Maintain the recommended speed where safe to do so Do not exceed legal speed limits Be prepared to stop at any intersection if needed Check for vehicles or pedestrians that may not obey signals Where You Will See This Sign Urban arterial roads with multiple traffic lights City corridors designed for traffic flow coordination Busy commuter routes Areas using “green wave” traffic systems Purpose of the Sign The coordinated traffic signal sign helps improve traffic efficiency by encouraging steady driving speeds that align with synchronized traffic lights, reducing unnecessary stops and congestion. Common Mistakes to Avoid Speeding to “catch” green lights Assuming all intersections will always remain green Ignoring pedestrians or cross traffic at intersections Treating the recommended speed as a legal limit Safety Tips Maintain a smooth, steady driving speed Always be ready to stop at intersections Watch for changing signals and road users Prioritise safety over maintaining timing with lights Penalties for Ignoring the Sign Ignoring traffic signal conditions may result in: Red-light violations at intersections Collisions with crossing vehicles or pedestrians Traffic fines for speeding or unsafe driving Increased risk of intersection accidents Summary The coordinated traffic signal sign in South Africa indicates that traffic lights along a route are synchronised. Drivers should maintain a safe recommended speed, but always remain alert and ready to stop at any intersection if required.