On any dual roadway.

To warn that the one-way roadway is ending soon and that approaching vehicles will use the same carriageway as you.

Position your vehicle on the road where it will not endanger approaching traffic. It may be necessary to change lanes.

Overview The Road Layout Signs (South Africa) – End of Dual-Roadway Sign are used on dual carriageways to warn drivers that a divided road is ending and the traffic flow will soon become a single carriageway. This means opposing traffic will begin using the same road space. What the Sign Means This sign indicates that the separation between opposing traffic lanes is ending ahead. Drivers will soon share the same roadway with oncoming vehicles, requiring extra caution and possible lane changes. The key purpose is: to warn that a dual carriageway is ending and traffic will merge into a single shared roadway. How It Works in Practice The divided road (with separate directions) is ending. Traffic from both directions will begin sharing the same carriageway. Drivers must adjust position and prepare to merge safely. Lane changes may be required to avoid conflict with oncoming traffic. Driver Responsibilities Reduce speed and prepare for merging traffic conditions Check mirrors and blind spots before changing lanes Position your vehicle safely within the available lane Stay alert for oncoming vehicles entering the same roadway Where You Will See This Sign On highways and dual carriageways At the end of divided road sections Before roadworks or temporary lane reductions Where road design changes from dual to single carriageway Purpose of the Sign The purpose of the end of dual-roadway sign is to alert drivers that the divided road structure is ending, allowing them time to adjust their speed, position, and awareness before sharing the roadway with opposing traffic. Common Mistakes to Avoid Continuing at high speed into a merging section Failing to check for oncoming traffic Not changing lanes early enough Misjudging the narrowing roadway Safety Tips Begin adjusting your lane position early Use mirrors and indicators when changing lanes Slow down gradually before the merge point Watch carefully for vehicles entering from opposite directions Penalties for Ignoring the Sign Ignoring end-of-dual-roadway warnings may result in: Traffic fines or penalties Head-on or side-impact collisions Dangerous lane merging incidents Legal liability for accidents caused Summary The end of dual-roadway sign in South Africa warns drivers that a divided road is ending and traffic will soon share a single carriageway. Drivers must adjust speed and position early, stay alert, and merge safely to avoid conflicts with oncoming traffic.

On any dual roadway.

To warn that the one-way roadway is ending soon and that approaching vehicles will use the same carriageway as you.

Position your vehicle on the road where it will not endanger approaching traffic. It may be necessary to change lanes.

Overview The Road Layout Signs (South Africa) – End of Dual-Roadway Sign are used on dual carriageways to warn drivers that the divided roadway is coming to an end. Traffic that was previously separated will soon share a single carriageway. What the Sign Means This sign indicates that the separation between opposing traffic directions is ending ahead. Vehicles travelling in opposite directions will begin using the same roadway space, increasing the need for caution and lane awareness. The key purpose is: to warn that a dual carriageway is ending and all traffic will merge into a single shared road. How It Works in Practice The divided road section is ending soon. Traffic from both directions will share one carriageway. Drivers must adjust lane position safely. Oncoming vehicles may now be closer and more direct. Driver Responsibilities Reduce speed as you approach the end of the dual roadway Check mirrors and blind spots before changing lanes Position your vehicle safely within the correct lane Stay alert for vehicles merging from the opposite direction Where You Will See This Sign On highways and dual carriageways At the end of divided road sections Before roadworks or lane reductions Where road design transitions from dual to single carriageway Purpose of the Sign The purpose of the end of dual-roadway sign is to warn drivers that a divided road is ending, allowing time to adjust speed, lane position, and awareness before sharing the roadway with opposing traffic. Common Mistakes to Avoid Failing to reduce speed before the merge point Not checking for oncoming vehicles Late or sudden lane changes Misjudging the narrowing of the roadway Safety Tips Start adjusting your position early Use mirrors and indicators before changing lanes Slow down gradually and safely Watch carefully for opposing traffic Penalties for Ignoring the Sign Ignoring end-of-dual-roadway warnings may result in: Traffic fines or penalties Head-on or side-impact collisions Dangerous merging incidents Legal liability for accidents caused Summary The end of dual-roadway sign in South Africa warns that a divided road is ending and traffic will soon share a single carriageway. Drivers must reduce speed, adjust lane position early, and remain alert for oncoming traffic to ensure safe driving conditions.

On any single carriage way road.

To warn that the single carriageway is ending and that you will soon enter a one-way road.

You will be able to overtake more safely after entering the one way road. This sign does not indicate a freeway and intersections can still be found on such a road.

Overview The Road Layout Signs (South Africa) – Beginning of Dual-Roadway Sign are used on single carriageway roads to warn drivers that the road ahead will split into a divided or one-way directional system. This means traffic will soon be separated into different lanes or carriageways for each direction. What the Sign Means This sign indicates that a single carriageway road is ending and transitioning into a dual or divided roadway system, often with improved overtaking opportunities. However, it does not mean the road is a freeway, and intersections may still be present. The key purpose is: to warn that a single carriageway is ending and the road ahead will become a divided or one-way directional roadway. How It Works in Practice The current single carriageway splits into separate directional lanes or roadways. Traffic becomes more organised, often improving overtaking opportunities. Opposing traffic is separated for safety. Intersections and access points may still exist along the route. Driver Responsibilities Prepare to adjust to a divided traffic system Stay in the correct lane for your direction of travel Use overtaking opportunities safely and legally Remain alert for intersections and entering traffic Where You Will See This Sign On rural and urban roads transitioning to dual carriageways Before sections with separated traffic flow At the start of upgraded or expanded road systems On major routes improving traffic capacity and safety Purpose of the Sign The purpose of the beginning of dual-roadway sign is to inform drivers that the road ahead will split into separate directions of travel, improving traffic flow and overtaking opportunities while maintaining awareness of potential intersections. Common Mistakes to Avoid Assuming the road is a freeway with no intersections Ignoring lane discipline after the split Unsafe overtaking without checking conditions Failing to notice upcoming junctions or access points Safety Tips Adjust your driving early as the road splits Stay in your designated lane for your direction Use overtaking lanes only when safe and legal Remain alert for intersections and merging traffic Penalties for Ignoring the Sign Ignoring dual-roadway transition warnings may result in: Traffic fines or penalties Unsafe overtaking incidents Collisions due to incorrect lane usage Legal liability for accidents caused Summary The beginning of dual-roadway sign in South Africa warns that a single carriageway is transitioning into a divided road system. Drivers must adjust lane position, remain alert for intersections, and use overtaking opportunities safely while following proper lane discipline.

On any single carriage way road.

To warn that the single carriageway is ending and that you will soon enter a one-way road.

You will be able to overtake more safely after entering the one way road. This sign does not indicate a freeway and intersections can still be found on such a road.

Overview The Road Layout Signs (South Africa) – Beginning of Dual-Roadway Sign are used on single carriageway roads to warn drivers that the road ahead is changing into a divided system. Traffic will soon be organised into separate directions of travel, improving flow and overtaking opportunities. What the Sign Means This sign indicates that a single carriageway is ending and the road will soon become a one-way directional system or divided roadway. Drivers will be entering a road where traffic is separated by direction, but it is not a freeway. The key purpose is: to warn that a single carriageway is ending and the road ahead will become a divided or one-way traffic system. How It Works in Practice The single carriageway transitions into separated lanes or roadways for each direction. Traffic flow becomes more structured and organised. Overtaking may become safer where conditions allow. Intersections and access points can still occur along the route. Driver Responsibilities Prepare for a change in road layout and traffic flow Stay in the correct lane for your direction of travel Overtake only when it is safe and permitted Remain alert for intersections and entering vehicles Where You Will See This Sign On single carriageway roads upgrading to divided systems On major routes with increasing traffic capacity Before sections with separated directional flow In urban and rural road expansion areas Purpose of the Sign The purpose of the beginning of dual-roadway sign is to inform drivers that the road ahead will split into separate directions of travel, allowing better traffic flow while reminding drivers that intersections may still be present. Common Mistakes to Avoid Assuming the road is a freeway with no intersections Unsafe overtaking without checking conditions Ignoring lane discipline after entering the divided road Failing to watch for junctions and access points Safety Tips Adjust your driving as the road layout changes Stay in the correct lane for your direction Only overtake when it is clearly safe Remain alert for intersections and merging traffic Penalties for Ignoring the Sign Ignoring dual-roadway transition warnings may result in: Traffic fines or penalties Unsafe overtaking incidents Collisions due to incorrect lane usage Legal liability for accidents caused Summary The beginning of dual-roadway sign in South Africa warns drivers that a single carriageway is ending and the road will become a divided system. Drivers must adjust to lane separation, remain alert for intersections, and overtake safely while following proper road discipline.

On any road before a intersection with traffic light.

To warn that there are isolated and particularly new traffic lights or traffic lights near an isolated traffic light at a pedestrian crossing ahead.

Slow down immediately and be ready to stop if the light changes from green to amber. Make sure there are no pedestrians or cross-traffic who might not obey the signals.

Overview The Symbolic Signs (South Africa) – Traffic Signal Ahead Sign are used on public roads to warn drivers that a traffic light-controlled intersection or pedestrian crossing is approaching. This is especially important where traffic signals may be newly installed, isolated, or not expected by drivers. What the Sign Means This sign indicates that there are traffic lights ahead controlling an intersection or pedestrian crossing. Drivers must prepare to slow down and respond to changing signal phases such as green, amber, or red. The key purpose is: to warn of upcoming traffic signals and require drivers to slow down and be ready to stop if the light changes. How It Works in Practice Traffic lights regulate movement at the upcoming intersection or crossing. Signal changes may occur suddenly (green to amber or red). Pedestrians and cross-traffic may be present. Drivers must be prepared to stop at short notice. Driver Responsibilities Slow down immediately when approaching the sign Be ready to stop if the light changes to amber or red Watch carefully for pedestrians crossing the road Observe cross-traffic that may not obey signals Where You Will See This Sign Before signalised intersections Near newly installed traffic lights At isolated intersections with unexpected signal control Near pedestrian crossings controlled by traffic lights Purpose of the Sign The purpose of the traffic signal ahead sign is to give drivers advance warning of upcoming traffic lights so they can reduce speed, stay alert, and prepare to stop safely when signals change. Common Mistakes to Avoid Approaching the intersection at high speed Ignoring the possibility of sudden signal changes Not checking for pedestrians in the crossing area Failing to anticipate stopped traffic ahead Safety Tips Slow down well before reaching the traffic lights Keep a safe following distance from other vehicles Be prepared to stop at any time Scan for pedestrians and cross-traffic continuously Penalties for Ignoring the Sign Ignoring traffic signal warnings may result in: Red-light violations and fines Collisions with cross-traffic or pedestrians Serious injury or fatalities Legal liability for negligent driving Summary The traffic signal ahead sign in South Africa warns drivers of an upcoming traffic light-controlled intersection or crossing. Drivers must slow down, stay alert, and be prepared to stop safely as signal conditions may change quickly.

On any road before a intersection with a stop sign.

To warn that there is a stop sign ahead, which cannot be seen in time.

Slow down in good time and be ready to stop

Overview The Symbolic Signs (South Africa) – Traffic Control “Stop” Ahead Sign are used on public roads to warn drivers that a stop-controlled intersection is approaching. This is especially important where the actual stop sign is not visible in time for safe reaction. What the Sign Means This sign indicates that there is a stop sign ahead at an intersection, requiring drivers to come to a complete stop before proceeding. It serves as an early warning so drivers can slow down safely in advance. The key purpose is: to warn of an upcoming stop-controlled intersection and require drivers to slow down and be prepared to stop completely. How It Works in Practice A stop sign is positioned ahead at an intersection. The actual stop sign may not be visible from a distance. Drivers must prepare to come to a full stop before entering the intersection. Cross traffic may have right of way. Driver Responsibilities Slow down well in advance of the intersection Be ready to come to a complete stop Check carefully for cross traffic from all directions Proceed only when it is safe and legal to do so Where You Will See This Sign Before intersections controlled by stop signs On rural roads with limited visibility Near bends, hills, or obstructions hiding the stop sign At newly installed or less obvious intersections Purpose of the Sign The purpose of the stop ahead sign is to give drivers advance warning of an upcoming stop-controlled intersection so they can reduce speed early, avoid sudden braking, and safely come to a complete stop when required. Common Mistakes to Avoid Approaching the intersection at high speed Failing to anticipate a full stop requirement Not checking for cross traffic before proceeding Missing the actual stop sign due to inattention Safety Tips Slow down as soon as you see the warning sign Scan the road ahead for the stop sign location Be prepared to stop completely Yield to vehicles that have right of way Penalties for Ignoring the Sign Ignoring stop ahead warnings may result in: Failure-to-stop violations Collisions at intersections Traffic fines and demerits (where applicable) Serious injury or fatal crashes Summary The stop ahead sign in South Africa warns drivers of an upcoming stop-controlled intersection. Drivers must slow down early, stay alert, and be ready to come to a complete stop before proceeding safely.

On any road

To warn that there is a yield sign ahead, which you may not be able to see in time without a warning.

Slow down and be ready to stop if necessary.

Overview The Symbolic Signs (South Africa) – Traffic Control “Yield” Ahead Sign are used on public roads to warn drivers that a yield-controlled intersection is approaching. This sign is placed in advance where the actual yield sign may not be visible in time for safe reaction. What the Sign Means This sign indicates that there is a yield (give way) sign ahead, requiring drivers to slow down and prepare to give right of way to other traffic if necessary. The key purpose is: to warn of an upcoming yield-controlled intersection and require drivers to slow down and be ready to stop or give way. How It Works in Practice A yield sign is positioned ahead at an intersection. The yield sign may not be immediately visible due to distance or obstacles. Drivers must reduce speed early and prepare to give way. Cross traffic may have priority at the junction. Driver Responsibilities Slow down well before reaching the intersection Be prepared to stop if other vehicles are approaching Check carefully for traffic from all directions Proceed only when it is safe and legal to do so Where You Will See This Sign Before yield-controlled intersections On rural roads with limited visibility Near bends, hills, or obstructions hiding the yield sign At intersections with merging traffic flows Purpose of the Sign The purpose of the yield ahead sign is to give drivers advance warning of an upcoming give-way situation so they can reduce speed early and safely prepare to yield to other road users. Common Mistakes to Avoid Approaching the intersection at high speed Failing to anticipate the need to yield Not checking for cross or merging traffic Assuming right of way without confirming Safety Tips Slow down as soon as you see the warning sign Be prepared to stop completely if required Look carefully for approaching vehicles Only proceed when the road is clear Penalties for Ignoring the Sign Ignoring yield warnings may result in: Failure-to-yield collisions Traffic fines for unsafe driving Serious intersection accidents Injury to drivers, passengers, or pedestrians Summary The yield ahead sign in South Africa warns drivers of an upcoming yield-controlled intersection. Drivers must slow down, stay alert, and be ready to stop or give way to other traffic to ensure safe passage.

On any road especially in rural areas.

To warn that there is a demarcated pedestrian crossing ahead.

Slow down and stop if a pedestrian is waiting at the crossing. Do not overtake other vehicles that have stopped at the pedestrian crossing.

Overview The Symbolic Signs (South Africa) – Pedestrian Crossing Sign are used on public roads, especially in rural or low-visibility areas, to warn drivers that a marked pedestrian crossing is ahead. This allows drivers to prepare to slow down and yield to pedestrians. What the Sign Means This sign indicates that a designated pedestrian crossing is approaching where pedestrians may cross the roadway. Drivers must be prepared to stop and give way to pedestrians waiting or already crossing. The key purpose is: to warn of a pedestrian crossing ahead and require drivers to slow down and stop for pedestrians when necessary. How It Works in Practice A marked pedestrian crossing is located ahead on the road. Pedestrians may be waiting to cross or already crossing. Vehicles must yield the right of way to pedestrians. Stopping distance must be considered in advance. Driver Responsibilities Slow down when approaching the crossing Be ready to stop if pedestrians are present Yield to pedestrians waiting or crossing the road Do not overtake vehicles that have stopped at the crossing Where You Will See This Sign In rural areas with limited visibility crossings Near schools, shops, or community zones On roads with marked zebra or pedestrian crossings In areas with frequent pedestrian activity Purpose of the Sign The purpose of the pedestrian crossing sign is to alert drivers to an upcoming crossing point so they can reduce speed and safely yield to pedestrians using or waiting to use the crossing. Common Mistakes to Avoid Failing to slow down when approaching the crossing Omitting to stop for pedestrians waiting to cross Overtaking vehicles that have stopped at the crossing Ignoring pedestrians in low-visibility conditions Safety Tips Always reduce speed near pedestrian crossings Be prepared to stop suddenly if needed Check both sides of the road for pedestrians Exercise extra caution in rural or poorly lit areas Penalties for Ignoring the Sign Ignoring pedestrian crossing warnings may result in: Fines for failure to yield to pedestrians Serious pedestrian collisions or injuries Traffic violations for unsafe overtaking Legal liability in the event of an accident Summary The pedestrian crossing sign in South Africa warns drivers of a marked crossing ahead. Drivers must slow down, stop when necessary, and always yield to pedestrians to ensure safe road use.

On roads where there are more pedestrians than normally can be expected.

To warn that pedestrians may be crossing the road for the next 2 km.

Slow down and look out for pedestrians who may be crossing the road.

Overview The Symbolic Signs (South Africa) – Pedestrian Sign is a warning sign used on roads where higher-than-normal pedestrian activity can be expected. It alerts drivers that pedestrians may be crossing the road frequently over the next 2 km. What the Sign Means This sign warns drivers that pedestrians are likely to be present near or on the roadway ahead. Extra caution is required because people may cross unexpectedly in the area. How It Works in Practice Pedestrian activity is expected over an extended section of road. People may cross the road at various points. Drivers must reduce speed and stay alert. Visibility may be limited in busy or built-up areas. Driver Responsibilities Slow down when entering the pedestrian zone Watch carefully for people crossing the road Be prepared to stop if necessary Give pedestrians enough space and time to cross safely Where You Will See This Sign This sign is commonly found: Near schools and residential areas Close to shopping centres or public facilities In villages, townships, or busy urban areas Along roads with frequent pedestrian movement Purpose of the Sign The purpose of the pedestrian sign is to warn drivers of increased pedestrian activity ahead so they can reduce speed and drive with greater caution to protect vulnerable road users. Common Mistakes to Avoid Driving too fast through pedestrian areas Failing to notice pedestrians crossing unexpectedly Not reducing speed in busy areas Distracted driving near pedestrian crossings Safety Tips Reduce speed well before reaching the area Continuously scan both sides of the road Be especially cautious near children and elderly pedestrians Keep a safe stopping distance from vehicles ahead Penalties for Ignoring the Sign Ignoring pedestrian warnings may result in: Traffic fines for negligent or dangerous driving Collisions involving pedestrians Legal consequences in the event of injury or death Increased risk to vulnerable road users Summary The pedestrian sign in South Africa warns drivers of increased pedestrian activity for the next 2 km. Drivers must slow down, remain alert, and be prepared for people crossing the road unexpectedly.

On any road especially near schools, playgrounds and sports fields.

To warn that children might be crossing the road.

Slow down immediately and look out for children who could be crossing the road unexpectedly or even be playing the road.

Overview The Symbolic Signs (South Africa) – Children Sign is a warning sign used on roads where children are likely to be present, especially near schools, playgrounds, and sports fields. It alerts drivers to the increased possibility of children crossing or entering the roadway unexpectedly. What the Sign Means This sign warns drivers that children may be crossing the road or playing nearby. Children can behave unpredictably and may enter the road suddenly without checking for traffic. How It Works in Practice Children may cross the road unexpectedly ahead. The area is commonly used by children for school or recreational activities. Drivers must reduce speed and remain highly alert. Extra caution is required during school opening and closing times. Driver Responsibilities Slow down immediately when approaching the area Watch carefully for children near the roadway Be prepared to stop suddenly if necessary Drive cautiously and avoid distractions Where You Will See This Sign This sign is commonly found: Near schools and educational facilities Close to playgrounds and parks Near sports fields and recreational areas In residential areas with high child activity Purpose of the Sign The purpose of the children sign is to warn drivers of areas where children may be present, helping reduce vehicle speed and improving safety for vulnerable young pedestrians. Common Mistakes to Avoid Driving too fast near schools or playgrounds Failing to anticipate sudden movement by children Ignoring school-zone safety precautions Becoming distracted in high-risk pedestrian areas Safety Tips Reduce speed well before entering the area Watch pavements, crossings, and roadside areas carefully Expect children to act unpredictably Be especially alert during school start and finish times Penalties for Ignoring the Sign Ignoring child-warning signs may result in: Traffic fines for negligent or dangerous driving Collisions involving children Legal consequences in the event of injury or death Serious risk to vulnerable road users Summary The children sign in South Africa warns drivers that children may be crossing or playing near the road ahead. Drivers must slow down, stay alert, and be prepared for sudden or unpredictable movements by children.

On any road

To warn the driver that there can be cyclists ahead.

Slow down and be on the look out for cyclists using or crossing the road for the next 2 km.

Overview The Symbolic Signs (South Africa) – Cyclists Sign are used on public roads to warn drivers that cyclists may be present ahead. These signs alert motorists to increased bicycle activity and the possibility of cyclists using or crossing the roadway. What the Sign Means This sign indicates that cyclists may be travelling on or crossing the road for the next 2 km. Drivers must remain alert and expect cyclists to share the roadway. The key purpose is: to warn drivers of cyclist activity ahead and require them to slow down and drive with extra caution. How It Works in Practice Cyclists may ride along the roadway or cross it unexpectedly. Motorists must share the road safely with cyclists. Drivers should reduce speed and increase following distance. Extra caution is required when overtaking cyclists. Driver Responsibilities Slow down when entering the cyclist warning zone Watch carefully for cyclists on or near the roadway Allow sufficient space when overtaking cyclists Be prepared for cyclists crossing the road unexpectedly Where You Will See This Sign Near cycling routes or recreational areas On roads frequently used by cyclists Near schools, parks, or residential areas In areas where cyclists regularly cross the road Purpose of the Sign The purpose of the cyclists sign is to alert drivers to the presence of cyclists ahead so they can reduce speed, drive cautiously, and safely share the road with vulnerable road users. Common Mistakes to Avoid Driving too close to cyclists Overtaking cyclists without enough clearance Failing to reduce speed in cyclist zones Not checking for cyclists before turning or changing lanes Safety Tips Maintain a safe distance from cyclists Reduce speed when approaching cyclists Check mirrors and blind spots carefully Be patient and allow cyclists adequate road space Penalties for Ignoring the Sign Ignoring cyclist warnings may result in: Collisions involving cyclists Traffic fines for negligent driving Serious injuries or fatalities Legal liability for accidents caused Summary The cyclists sign in South Africa warns drivers that cyclists may be using or crossing the road for the next 2 km. Drivers must slow down, stay alert, and share the road safely with cyclists.

On any road

To warn that there may be free ranging animals such as cattle, horses or sheep on the road.

Slow down and be on the look out for the next 2 km for animals.

Overview The Symbolic Signs (South Africa) – Farm Animals Sign are used on public roads to warn drivers that free-ranging farm animals may be present on or near the roadway. These signs are commonly found in rural and farming areas where livestock movement is frequent. What the Sign Means This sign indicates that animals such as cattle, horses, sheep, or other livestock may be crossing or standing on the road for the next 2 km. Drivers must remain alert and prepared for unexpected animal movements. The key purpose is: to warn drivers of possible farm animal activity ahead and require them to slow down and drive cautiously. How It Works in Practice Farm animals may wander onto or across the roadway unexpectedly. Animals can move unpredictably and may not react to vehicles. Drivers must reduce speed and stay alert for livestock. Extra caution is required, especially at night or in poor visibility conditions. Driver Responsibilities Slow down when entering the warning area Watch carefully for animals near or on the road Be prepared to stop suddenly if animals appear Avoid sounding the horn excessively as it may frighten animals Where You Will See This Sign In rural and farming areas Near grazing land or livestock crossings On roads passing through agricultural regions Near farms, paddocks, or open fields Purpose of the Sign The purpose of the farm animals sign is to alert drivers to the possible presence of livestock on the roadway so they can reduce speed, remain cautious, and avoid collisions with animals. Common Mistakes to Avoid Driving too fast through animal warning zones Failing to scan the roadside for livestock Assuming animals will move away from the road quickly Ignoring warning signs in rural areas Safety Tips Reduce speed immediately when entering the area Use headlights properly at night to improve visibility Keep a safe stopping distance from other vehicles Proceed carefully if animals are already on the roadway Penalties for Ignoring the Sign Ignoring farm animal warnings may result in: Collisions with livestock Vehicle damage and possible injury Traffic fines for negligent driving Legal liability for harm caused to animals or road users Summary The farm animals sign in South Africa warns drivers that livestock may be present on or near the road for the next 2 km. Drivers must slow down, stay alert, and drive cautiously to avoid collisions with animals.

On any road

To warn that there may be free ranging animals such as cattle, horses or sheep on the road.

Slow down and be on the look out for the next 2 km for animals.

Overview The Symbolic Signs (South Africa) – Farm Animals Sign are used on public roads to warn drivers that free-ranging farm animals may be present ahead. These signs are commonly found in rural and agricultural areas where livestock may move onto or across the roadway. What the Sign Means This sign indicates that animals such as cattle, horses, sheep, or other livestock may be on or near the road for the next 2 km. Drivers should expect possible animal crossings and remain alert at all times. The key purpose is: to warn drivers of livestock activity ahead and require them to slow down and drive with caution. How It Works in Practice Farm animals may enter or cross the roadway unexpectedly. Animals often move unpredictably and may not react quickly to vehicles. Drivers must reduce speed and increase awareness. Extra care is needed during darkness or poor weather conditions. Driver Responsibilities Slow down when entering the animal warning zone Watch carefully for animals on or near the road Be prepared to stop suddenly if necessary Proceed cautiously around livestock Where You Will See This Sign On rural and farming roads Near grazing areas and livestock crossings Along roads passing through agricultural land Near farms, paddocks, and open countryside Purpose of the Sign The purpose of the farm animals sign is to alert drivers to the possible presence of livestock on the roadway so they can reduce speed, stay alert, and avoid collisions with animals. Common Mistakes to Avoid Driving too fast through livestock warning areas Ignoring animals standing near the roadway Assuming animals will move away quickly Failing to reduce speed in rural areas Safety Tips Reduce speed immediately when you see the sign Keep a safe following distance from other vehicles Use headlights properly at night for better visibility Approach animals calmly and cautiously Penalties for Ignoring the Sign Ignoring farm animal warnings may result in: Collisions with livestock Vehicle damage and injury Traffic fines for negligent driving Legal liability for harm caused to animals or road users Summary The farm animals sign in South Africa warns drivers that livestock may be present on or near the road for the next 2 km. Drivers must slow down, remain alert, and drive carefully to avoid collisions with animals.

On any road

To warn that there may be free ranging animals such as cattle, horses or sheep on the road.

Slow down and be on the look out for the next 2 km for animals.

Overview The Symbolic Signs (South Africa) – Farm Animals Sign are used on public roads to warn drivers that free-ranging livestock may be present on or near the roadway. These signs are mainly found in rural and farming areas where animals can move freely across roads. What the Sign Means This sign indicates that farm animals such as cattle, horses, sheep, or goats may be on the road or crossing it for the next 2 km. Drivers must be prepared for unexpected animal movement. The key purpose is: to warn of possible livestock on the road ahead and require drivers to slow down and remain alert. How It Works in Practice Animals may wander onto the road without warning. Livestock movement is often unpredictable and slow. Drivers must expect possible crossings at any point in the area. Reduced speed is essential to avoid collisions. Driver Responsibilities Slow down when entering the warning zone Continuously scan the road and roadside for animals Be ready to stop suddenly if animals appear Drive cautiously for the full distance indicated Where You Will See This Sign In rural farming regions Near grazing fields and livestock areas On roads passing through agricultural land Near farms, kraals, or open countryside Purpose of the Sign The purpose of the farm animals sign is to warn drivers of possible livestock presence on the roadway so they can reduce speed, stay alert, and avoid collisions with animals. Common Mistakes to Avoid Driving at normal speed in livestock areas Failing to check the roadside for animals Assuming animals will quickly move away Ignoring warning signs in rural environments Safety Tips Reduce speed immediately when you see the sign Use headlights effectively, especially at night Keep a safe stopping distance from other vehicles Approach animals calmly and cautiously Penalties for Ignoring the Sign Ignoring livestock warnings may result in: Collisions with animals Vehicle damage and possible injury Traffic fines for negligent driving Legal liability for harm caused Summary The farm animals sign in South Africa warns drivers that livestock may be present on or near the road for the next 2 km. Drivers must slow down, stay alert, and drive carefully to ensure safety for both road users and animals.

Especially on rural roads.

To warn that there may be wild animals on the road or crossing the road.

Slow down and be on the look out for the next 2 km for wild animals.

Overview The Symbolic Signs (South Africa) – Wild Animals Ahead Sign are used on rural roads to warn drivers that wild animals may be present on or near the roadway. These areas are typically close to natural habitats, game reserves, or unfenced wilderness regions. What the Sign Means This sign indicates that wild animals may cross or stand on the road for the next 2 km. Drivers must be prepared for sudden and unpredictable animal movement. The key purpose is: to warn of possible wild animal activity ahead and require drivers to slow down and stay alert. How It Works in Practice Wild animals may enter or cross the roadway unexpectedly. Animals may move quickly, unpredictably, or at night. Drivers must reduce speed and remain highly alert. Visibility conditions can make animals difficult to spot early. Driver Responsibilities Slow down when entering the warning zone Watch carefully for animals near or on the road Be prepared to stop suddenly if needed Drive cautiously for the full 2 km distance Where You Will See This Sign Near game reserves and nature reserves On rural roads through wilderness areas In regions with unfenced natural habitats Along roads near parks or conservation areas Purpose of the Sign The purpose of the wild animals ahead sign is to alert drivers to the possible presence of wildlife on the roadway so they can reduce speed, stay alert, and prevent collisions with animals. Common Mistakes to Avoid Driving at normal speed in wildlife areas Failing to scan road edges and surroundings Assuming animals will move out of the way Ignoring warnings in rural or natural areas Safety Tips Reduce speed immediately when you see the sign Use headlights carefully, especially at night Stay alert for sudden movement near the road Keep a safe stopping distance from other vehicles Penalties for Ignoring the Sign Ignoring wildlife warnings may result in: Collisions with wild animals Serious vehicle damage or injury Traffic fines for negligent driving Legal consequences for environmental or road damage incidents Summary The wild animals ahead sign in South Africa warns drivers that wildlife may be present on or near the road for the next 2 km. Drivers must slow down, stay alert, and drive cautiously to avoid dangerous animal encounters.

At a railway crossing or roadway ahead.

To warn that there is a gate or boom across the road ahead.

Slow down and be prepared to stop should the gates be closing or are closed.

Overview The Symbolic Signs (South Africa) – Gate Sign is a warning sign used on public roads to alert drivers that a physical barrier, such as a gate or boom, is present ahead. It is commonly associated with railway crossings or controlled access points. What the Sign Means This sign warns that there is a gate or boom across the road ahead that may be open, closing, or fully closed. Drivers must be prepared to stop and wait if access is restricted. How It Works in Practice A gate or boom may control access to a road or railway crossing. The barrier may close when trains or authorised vehicles are passing. Drivers may need to stop completely and wait for it to open. Visibility of the gate may be limited until close to the point of control. Driver Responsibilities Slow down when approaching the gate area Be prepared to stop if the barrier is closing or closed Do not attempt to pass around or under a closing gate Wait until the gate is fully open and it is safe to proceed Where You Will See This Sign This sign is commonly found: At railway level crossings At controlled access roads or private entrances Near industrial sites or restricted areas Purpose of the Sign The purpose of the gate sign is to warn drivers of a physical barrier ahead so they can slow down in advance, prepare to stop, and avoid collisions or dangerous attempts to cross when access is restricted. Common Mistakes to Avoid Approaching the gate at high speed Attempting to pass a closing or closed barrier Ignoring warning signals at railway crossings Assuming the gate will always be open Safety Tips Reduce speed well before reaching the gate Watch for flashing signals or barrier movement Stop completely if the gate is closed or closing Only proceed once the barrier is fully open and safe Penalties for Ignoring the Sign Ignoring gate warnings may result in: Serious collisions with trains or barriers Traffic fines and legal penalties Vehicle damage and possible injury or death Criminal liability in severe incidents Summary The gate sign in South Africa warns drivers of a gate or boom ahead that may control access to the road. Drivers must slow down, be prepared to stop, and only proceed when it is safe and the barrier is fully open.

Especially on rural roads.

To warn that there is a motor gate to the left or right or in the middle of the road.

Slow down and make sure there is no oncoming traffic about to cross the same gate.

Overview The Symbolic Signs (South Africa) – Motor Gate Sign are used mainly on rural roads to warn drivers that a motor gate is ahead on or beside the roadway. These gates are typically used to control access to farms, private land, or restricted rural areas. What the Sign Means This sign indicates that a motor gate is located ahead to the left, right, or sometimes in the middle of the road. Drivers must be alert for vehicles slowing down, stopping, or crossing to pass through the gate. The key purpose is: to warn of a motor gate ahead and require drivers to slow down and check for other vehicles using the gate. How It Works in Practice A gate may restrict or control access across the roadway. Vehicles may stop or turn to pass through the gate. Oncoming traffic may also be approaching the same gate. Conflicts can occur if drivers do not reduce speed in time. Driver Responsibilities Slow down when approaching the motor gate area Check carefully for oncoming and crossing traffic Be prepared to stop if another vehicle is using the gate Proceed only when it is safe and clear to do so Where You Will See This Sign On rural and farm roads Near private property entrances or farm gates On access roads to agricultural or restricted areas In areas where roads pass through gated properties Purpose of the Sign The purpose of the motor gate sign is to warn drivers of a gate-controlled section of road so they can reduce speed, stay alert, and avoid conflicts with vehicles entering, exiting, or crossing through the gate. Common Mistakes to Avoid Approaching the gate at high speed Failing to check for oncoming traffic Not anticipating vehicles turning into the gate Ignoring reduced visibility around gate structures Safety Tips Slow down well before reaching the gate Look ahead and to both sides of the road Be prepared to stop suddenly if needed Proceed cautiously through the area Penalties for Ignoring the Sign Ignoring motor gate warnings may result in: Collisions with vehicles entering or exiting the gate Traffic fines for negligent driving Damage to property or vehicles Serious injury in rural road environments Summary The motor gate sign in South Africa warns drivers of a gate-controlled section of road, usually in rural areas. Drivers must slow down, check for other traffic, and proceed only when it is safe to pass through the gate area.

Especially on rural roads.

To warn that there is a motor gate to the left or right or in the middle of the road.

Slow down and make sure there is no oncoming traffic about to cross the same gate.

Overview The Symbolic Signs (South Africa) – Motor Gate Sign is a warning sign used on public roads, especially in rural areas, to alert drivers that a motor gate is present ahead. The gate may be located to the left, right, or in the centre of the road. What the Sign Means This sign warns that a motor-operated gate controls access along the roadway. Drivers may need to slow down, stop, or navigate carefully depending on the gate’s position and movement. How It Works in Practice A motor gate may open or close to control access on the road. The gate may be positioned across part or all of the roadway. Oncoming or crossing traffic may also be affected by the same gate. Movement through the gate area may be restricted at certain times. Driver Responsibilities Slow down when approaching the motor gate area Check carefully for oncoming or crossing vehicles Be prepared to stop if the gate is closed or in motion Proceed only when it is safe and the way is clear Where You Will See This Sign This sign is commonly found: On rural roads and farm access routes At entrances to private properties or estates Near agricultural or restricted access areas Purpose of the Sign The purpose of the motor gate sign is to warn drivers of a controlled access point ahead, helping them reduce speed, stay alert, and safely navigate areas where gates may restrict or manage traffic flow. Common Mistakes to Avoid Approaching the gate at unsafe speed Failing to check for oncoming vehicles Attempting to pass through while the gate is closing Assuming the road is always open and clear Safety Tips Slow down well before reaching the gate Look for vehicles approaching from the opposite side Wait for the gate to fully open if necessary Proceed carefully and only when safe Penalties for Ignoring the Sign Ignoring motor gate warnings may result in: Collisions with gates or other vehicles Traffic fines for unsafe driving Damage to vehicles or infrastructure Legal liability in the event of an accident Summary The motor gate sign in South Africa warns drivers of a controlled gate ahead, often on rural roads. Drivers must slow down, check for oncoming traffic, and proceed only when the gate area is clear and safe.

Especially on rural roads.

To warn that there is a motor gate to the left or right or in the middle of the road.

Slow down and make sure there is no oncoming traffic about to cross the same gate.

Overview The Symbolic Signs (South Africa) – Motor Gate Sign are used mainly on rural roads to warn drivers that a motor gate is ahead on or near the roadway. These gates are commonly used to control access to farms, private properties, or restricted rural areas. What the Sign Means This sign indicates that a motor gate is located ahead, either to the left, right, or sometimes directly across the road. Drivers must be aware that vehicles may slow down, stop, or cross the road to use the gate. The key purpose is: to warn of a motor gate ahead and require drivers to slow down and check for oncoming or crossing traffic. How It Works in Practice A gate may control access to a property or area across or beside the road. Vehicles may stop or turn into the gate area. Oncoming vehicles may also be approaching the same gate from the opposite direction. Limited space and visibility can create conflict points. Driver Responsibilities Slow down well before reaching the motor gate area Check carefully for oncoming or crossing vehicles Be prepared to stop if another vehicle is using the gate Proceed only when it is safe and clear Where You Will See This Sign On rural and farm roads Near private property entrances At access points to agricultural or restricted land Where roads pass through gated areas Purpose of the Sign The purpose of the motor gate sign is to alert drivers to a gate-controlled section of road so they can reduce speed, remain alert, and avoid conflicts with other vehicles using the same gate. Common Mistakes to Avoid Approaching the gate at high speed Failing to look for oncoming traffic Not anticipating vehicles turning into or out of the gate Ignoring reduced visibility in rural areas Safety Tips Slow down early when approaching the gate Watch both directions for oncoming vehicles Be prepared to stop if necessary Proceed carefully only when the road is clear Penalties for Ignoring the Sign Ignoring motor gate warnings may result in: Collisions with other vehicles at the gate Traffic fines for negligent driving Property or vehicle damage Injury due to unsafe rural road conditions Summary The motor gate sign in South Africa warns drivers of a gate ahead on rural roads. Drivers must slow down, check carefully for oncoming traffic, and only proceed when it is safe to pass through the gate area.

On any road

To warn that there is a railway crossing ahead.

Slow down and look to the right and left for oncoming trains. If a train is approaching stop in time, but not within the railway crossing reserve.

Overview The Symbolic Signs (South Africa) – Railway Crossing Sign is a warning sign used on public roads to alert drivers that a railway level crossing is ahead. It gives drivers time to slow down, look for trains, and prepare to stop if necessary. What the Sign Means This sign warns that a railway crossing is approaching and trains may cross the road. Drivers must be alert, reduce speed, and check carefully for oncoming trains from both directions. How It Works in Practice A railway line crosses the road ahead. Trains may approach from either the left or right. Visibility of trains may be limited until closer to the crossing. Drivers must be prepared to stop before reaching the crossing. Driver Responsibilities Slow down immediately when approaching the crossing Look carefully left and right for approaching trains Be prepared to stop if a train is visible or signals are active Never enter the crossing if a train is approaching Where You Will See This Sign This sign is commonly found: Before railway level crossings on rural and urban roads In areas where roads intersect railway lines Near active or frequently used train routes Purpose of the Sign The purpose of the railway crossing sign is to warn drivers of an upcoming train crossing so they can reduce speed, stay alert, and stop safely if a train is approaching. Common Mistakes to Avoid Driving over the crossing without checking for trains Ignoring warning signals or barriers Stopping on the railway tracks Trying to cross when a train is approaching Safety Tips Slow down well before the crossing Always check both directions for trains Only cross when it is completely safe Never stop on the railway tracks Penalties for Ignoring the Sign Ignoring railway crossing warnings may result in: Severe or fatal collisions with trains Heavy traffic fines and penalties Legal consequences for reckless driving Serious risk to life and property Summary The railway crossing sign in South Africa warns drivers of an upcoming level crossing. Drivers must slow down, look carefully for trains, and only proceed when it is safe to cross.

On any road especially in mountainous areas.

To warn that there is a tunnel ahead.

Slow down and switch your car's headlights on in the dim position.

Overview The Symbolic Signs (South Africa) – Tunnel Sign is a warning sign used on public roads, especially in mountainous or hilly areas, to alert drivers that a tunnel is approaching. It helps drivers prepare for reduced visibility and confined driving conditions. What the Sign Means This sign warns that a tunnel is ahead where lighting and road conditions may change suddenly. Drivers must prepare for reduced natural light and adjust their driving accordingly. How It Works in Practice A tunnel is located ahead on the roadway. Lighting conditions inside the tunnel are usually dim or artificial. Visibility changes quickly when entering or exiting the tunnel. Traffic flow may be restricted to confined lanes. Driver Responsibilities Slow down when approaching the tunnel Switch on headlights in dim or low-beam mode Maintain a safe following distance Drive carefully due to reduced visibility and space Where You Will See This Sign This sign is commonly found: In mountainous or hilly regions On highways passing through tunnels In areas where roads pass under terrain or infrastructure Purpose of the Sign The purpose of the tunnel sign is to warn drivers of an upcoming enclosed road section so they can reduce speed, activate headlights, and adjust to changing visibility conditions safely. Common Mistakes to Avoid Entering a tunnel without switching on headlights Driving too fast in low-visibility conditions Failing to maintain a safe following distance Overtaking inside the tunnel where it is unsafe Safety Tips Turn on low-beam headlights before entering Slow down gradually before reaching the tunnel Keep a steady speed while inside Watch for sudden changes in lighting at exits Penalties for Ignoring the Sign Ignoring tunnel warnings may result in: Traffic fines for unsafe driving Increased risk of collisions inside tunnels Reduced visibility-related accidents Danger to all tunnel users Summary The tunnel sign in South Africa warns drivers of an upcoming enclosed roadway. Drivers must slow down, switch on headlights, and drive carefully due to reduced visibility and confined space.

On any road

To warn that there is a structure ahead of which the height is indicated on the road traffic sign.

If your vehicle is higher than the bridge or structure as indicated by this sign, find an alternative route.

Overview The Symbolic Signs (South Africa) – Height Restriction Sign are used on public roads to warn drivers that a structure ahead has a limited height clearance. This is important for preventing collisions between tall vehicles and bridges, tunnels, or overhead structures. What the Sign Means This sign indicates that there is a bridge, tunnel, or overhead structure ahead with a maximum height clearance shown on the sign. Vehicles taller than the indicated height cannot safely pass. The key purpose is: to warn of a height-restricted structure ahead and require drivers of tall vehicles to choose an alternative route. How It Works in Practice A bridge, tunnel, or overhead obstacle limits vehicle height. The height limit is clearly displayed on the sign. Vehicles exceeding the height must not proceed. Alternative routes must be used for tall vehicles. Driver Responsibilities Check your vehicle height before approaching the structure Slow down and read the height restriction carefully Do not attempt to pass if your vehicle is too tall Use an alternative route if necessary Where You Will See This Sign Before low bridges or overpasses At tunnel entrances Near parking structures or industrial zones On routes with overhead cables or structures Purpose of the Sign The purpose of the height restriction sign is to warn drivers in advance that a low-clearance structure is ahead so they can avoid collisions and choose a safe alternative route. Common Mistakes to Avoid Ignoring vehicle height limits Attempting to pass under a low structure Failing to check roof load or cargo height Assuming all vehicles can clear the structure Safety Tips Always know your vehicle’s exact height Reduce speed when approaching the sign Plan an alternative route if unsure Be extra cautious with loaded or commercial vehicles Penalties for Ignoring the Sign Ignoring height restriction warnings may result in: Severe vehicle damage or roof collapse Traffic obstruction or accidents Fines for negligent driving Risk of injury to occupants or other road users Summary The height restriction sign in South Africa warns drivers of a low-clearance structure ahead. Drivers must check their vehicle height, slow down, and use an alternative route if their vehicle is too tall to pass safely.

On any road but especially in mountainous areas.

To warn that curves in the road or other structures on the side of the road make it impossible for vehicles longer than the length indicated on this road sign.

Find an alternative route if your vehicle is longer that the length indicated in metres on this sign.

Overview The Symbolic Signs (South Africa) – Length Restriction Sign are used on public roads, especially in mountainous or narrow areas, to warn drivers that vehicles longer than a specified length cannot safely proceed. This is usually due to sharp curves, narrow roads, or roadside obstacles. What the Sign Means This sign indicates that a road section ahead has physical limitations that prevent long vehicles (such as trucks, buses, or trailers) from passing safely. The maximum allowed vehicle length is shown on the sign in metres. The key purpose is: to warn of a length-restricted section of road and require long vehicles to use an alternative route. How It Works in Practice Road geometry (tight bends or curves) restricts long vehicles. Roadside obstacles may prevent safe turning or passing. Vehicles exceeding the indicated length cannot navigate safely. Alternative routes are required for longer vehicles. Driver Responsibilities Check your vehicle length before proceeding Slow down and read the restriction carefully Do not attempt to enter if your vehicle is too long Use an alternative route if necessary Where You Will See This Sign In mountainous areas with sharp bends On narrow rural roads Near bridges or constrained road sections In areas with limited turning space Purpose of the Sign The purpose of the length restriction sign is to warn drivers in advance that a road section cannot safely accommodate long vehicles, helping prevent blockages, accidents, and damage to infrastructure. Common Mistakes to Avoid Entering restricted roads with long vehicles Ignoring vehicle length limitations Assuming trailers or buses can pass safely Failing to plan an alternative route Safety Tips Know your full vehicle and trailer length Read restriction signs early and carefully Plan your route in advance for large vehicles Proceed only if your vehicle complies with the limit Penalties for Ignoring the Sign Ignoring length restriction warnings may result in: Vehicle becoming stuck on the road Damage to your vehicle or roadside infrastructure Traffic obstruction for other road users Fines for negligent driving Summary The length restriction sign in South Africa warns drivers that vehicles longer than a specified length cannot safely use the road ahead. Drivers must check their vehicle size and choose an alternative route if necessary to avoid dangerous situations.

On any road but especially in mountainous areas.

To warn that the road will descend steeply.

Be aware of slow-moving traffic, particularly in mountainous areas with sharp curves. Allow for a longer stopping distance on a descent and especially when your vehicle is heavily laden.

Overview The Symbolic Signs (South Africa) – Steep Descent Sign are used on public roads, especially in mountainous or hilly areas, to warn drivers that a steep downhill section is approaching. These roads require extra control and careful braking to maintain safety. What the Sign Means This sign indicates that the road ahead will descend steeply, which may affect vehicle speed, braking distance, and control. Drivers must be prepared for slower-moving vehicles and increased braking demands. The key purpose is: to warn of a steep downhill section ahead and require drivers to reduce speed and maintain control. How It Works in Practice The road gradient becomes significantly steep downhill. Vehicles may gain speed quickly if not controlled. Heavy vehicles may move more slowly due to engine braking. Sharp curves may increase stopping difficulty. Driver Responsibilities Reduce speed before entering the descent Engage a lower gear for better control Maintain a safe following distance Use brakes carefully to avoid overheating Where You Will See This Sign In mountainous areas On steep rural or regional roads Near passes or valley descents On roads with sharp bends and elevation changes Purpose of the Sign The purpose of the steep descent sign is to warn drivers of a dangerous downhill section so they can reduce speed, select the correct gear, and maintain safe vehicle control. Common Mistakes to Avoid Driving downhill at high speed Riding brakes continuously (causing overheating) Following other vehicles too closely Ignoring gear selection on steep slopes Safety Tips Shift to a lower gear before the descent Brake intermittently instead of continuously Keep extra following distance from other vehicles Be especially cautious in wet or heavy-load conditions Penalties for Ignoring the Sign Ignoring steep descent warnings may result in: Loss of vehicle control Brake failure due to overheating Serious collisions on downhill roads Traffic violations for reckless driving Summary The steep descent sign in South Africa warns drivers of a steep downhill section ahead. Drivers must reduce speed, use appropriate gears, and maintain control to ensure safe travel down the slope.