Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of minibuses.

If you are a minibus driver, you need to comply with the primary sign.

Overview The Minibus Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the rule shown on the main sign applies specifically to drivers of minibuses. What the Sign Means When this sign is displayed, it limits the applicability of the main regulatory instruction to minibuses only (often referring to public transport minibuses such as taxis). Other vehicle types are not affected unless separate signage applies to them. The key rule is: the main regulation applies only to minibuses. How It Works in Practice The main regulatory sign sets the rule (e.g., parking restriction, stopping control, lane use) The “Minibus” panel specifies that only minibus drivers must follow that rule Other vehicles follow general traffic rules unless otherwise indicated Driver Responsibilities Minibus drivers: Must comply with the instruction on the main sign Other drivers: Should not assume the restriction applies to them Always read both the main sign and the secondary panel together Be aware of vehicle-specific rules in public transport areas Where You Will See This Sign This sign is commonly used: At taxi ranks and minibus loading zones In public transport corridors Near terminals or high passenger activity areas In urban zones with controlled minibus operations Purpose of the Sign The purpose of the Minibus Sign is to apply specific traffic rules to minibuses, helping regulate public transport operations and improve traffic flow and safety. Common Mistakes to Avoid Other drivers incorrectly following minibus-only restrictions Minibus drivers ignoring rules that apply specifically to them Assuming the rule applies to all vehicles Misinterpreting vehicle-specific signage in busy transport areas Safety Tips Minibus drivers should be alert to dedicated signage and zones Other motorists should give way where required in minibus areas Always check supplementary panels before acting Be cautious in high pedestrian and passenger zones Penalties for Ignoring the Sign Ignoring a Minibus Sign may result in: Fines or traffic violations Illegal stopping or parking penalties Disruption of public transport operations Increased risk of accidents in busy areas Summary The Minibus Sign in South Africa indicates that a traffic regulation applies only to minibuses. It ensures efficient and safe management of public transport vehicles on the road.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of midibuses.

If you are a midibus driver, you need to comply with the primary sign.

Overview The Midibus Sign (Exclusive Secondary Message Sign) in South Africa is a regulatory supplementary sign placed beneath a main traffic sign. It indicates that the instruction or restriction shown on the main sign applies specifically to midibuses. What the Sign Means When this sign is displayed, the main traffic regulation is targeted only at midibus drivers. Other vehicle categories are not affected unless another sign also applies to them. The key rule is: if you are driving a midibus, you must comply with the main sign. Driver Responsibilities If you are a midibus driver, you must obey the main regulatory sign If you are not driving a midibus, the rule does not apply to you (unless stated otherwise) Always read the main sign together with the supplementary message Follow all vehicle-class-specific traffic rules Be aware of designated public transport vehicle areas Where You Will See This Sign Public transport routes and corridors Designated loading and stopping areas for passenger transport Urban transport hubs and terminals Restricted lanes or zones for specific vehicle classes Purpose of the Sign The purpose of the Midibus Sign is to ensure that traffic regulations apply only to midibuses where intended, improving efficiency and safety in public transport operations. Common Mistakes to Avoid Assuming the restriction applies to all vehicles Ignoring midibus-specific lane or access rules Misreading supplementary signs beneath the main sign Entering restricted areas without proper vehicle classification Safety Tips Midibus drivers should always confirm vehicle-specific restrictions Other drivers should remain aware of midibus-priority zones Allow sufficient space for public transport vehicles to operate Follow all classification-based road signage carefully Penalties for Ignoring the Sign Ignoring a Midibus Sign may result in: Fines for non-compliance with vehicle-specific rules Operational penalties for transport providers Traffic enforcement action in restricted zones Increased safety risks in public transport areas Summary The Midibus Sign in South Africa indicates that a traffic rule applies only to midibuses. Midibus drivers must comply with the main regulatory sign whenever this supplementary sign is present.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of delivery vehicles.

If you are a delivery vehicle driver, you need to comply with the primary sign.

Overview The Delivery Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the rule shown on the main sign applies specifically to drivers of delivery vehicles. What the Sign Means When this sign is used, it limits the applicability of the main regulation to vehicles involved in deliveries (such as vans, trucks, or company vehicles actively transporting goods). Other vehicles are not affected unless separate signage applies. The key rule is: the main restriction applies only to delivery vehicles. How It Works in Practice The main regulatory sign defines the rule (e.g., parking control, loading zone rules, access restrictions) The “Delivery Vehicle” panel specifies that only delivery vehicles must follow the rule Other road users follow general traffic regulations unless otherwise indicated Driver Responsibilities Delivery drivers: Must comply with the instruction on the main sign while making deliveries Other drivers: Should not assume the restriction applies to them Always read both the main sign and the secondary panel together Ensure compliance only if engaged in delivery operations Where You Will See This Sign This sign is commonly used: In loading bays and delivery zones Outside shops, warehouses, and commercial buildings In city centres with controlled goods delivery access At business districts with scheduled delivery times Purpose of the Sign The purpose of the Delivery Vehicle Sign is to regulate access and behaviour of vehicles making deliveries, ensuring efficient loading operations and reducing congestion in busy commercial areas. Common Mistakes to Avoid Non-delivery vehicles using delivery-only areas Delivery drivers ignoring time or access restrictions Misinterpreting general parking as delivery access Blocking loading zones unnecessarily Safety Tips Only use delivery zones when actively loading or unloading goods Keep deliveries within permitted time windows Avoid obstructing traffic or pedestrian pathways Always check additional signage for time limits or conditions Penalties for Ignoring the Sign Ignoring a Delivery Vehicle Sign may result in: Parking fines or enforcement penalties Removal or towing from restricted loading areas Obstruction violations in loading zones Delays in delivery operations due to congestion Summary The Delivery Vehicle Sign in South Africa indicates that a traffic regulation applies only to vehicles actively involved in deliveries. It helps manage loading areas efficiently and reduces congestion in commercial zones.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of goods vehicles.

If you are a goods vehicle driver, you need to comply with the primary sign.

Overview The Goods Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a regulatory supplementary sign placed beneath a main traffic sign. It indicates that the rule or restriction shown on the main sign applies specifically to goods vehicles (freight or cargo-carrying vehicles). What the Sign Means When this sign is displayed, the main traffic instruction is directed only at drivers of goods vehicles. Other vehicle types are not affected unless additional signage states otherwise. The key rule is: the main regulation applies only to goods vehicles. Driver Responsibilities If you are driving a goods vehicle, you must comply with the main sign If you are not driving a goods vehicle, the restriction does not apply to you (unless otherwise indicated) Always interpret the main sign together with the supplementary message Follow all freight and logistics-related road rules Be aware of heavy vehicle restrictions in certain areas Where You Will See This Sign Industrial and logistics routes Urban freight delivery zones Weight-restricted or structurally sensitive roads Designated truck routes and loading areas Purpose of the Sign The purpose of the Goods Vehicle Sign is to apply specific traffic regulations to freight and cargo vehicles, improving safety, reducing congestion, and protecting road infrastructure. Common Mistakes to Avoid Assuming the rule applies to all vehicles Ignoring goods-vehicle-only restrictions when driving a truck or delivery vehicle Misreading supplementary signage under the main sign Using restricted roads as shortcuts for freight transport Safety Tips Goods vehicle drivers should always check route restrictions before entering urban areas Be aware of height, weight, and access limitations Plan deliveries according to designated freight routes Other drivers should give heavy vehicles adequate space Penalties for Ignoring the Sign Ignoring a Goods Vehicle Sign may result in: Fines for violating freight-specific restrictions Enforcement action for illegal road use by heavy vehicles Damage liability for infrastructure or road surfaces Delays or penalties for logistics operators Summary The Goods Vehicle Sign in South Africa indicates that a traffic rule applies only to goods-carrying vehicles. It ensures that freight traffic is properly managed to improve safety and protect road infrastructure.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of goods vehicles of a certain mass.

If you are a goods vehicle driver of a vehicle with the displayed mass, you need to comply with the primary sign.

Overview The Goods Vehicle Over Indicated GVM Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the rule on the main sign applies specifically to goods vehicles exceeding a stated Gross Vehicle Mass (GVM). What the Sign Means When this sign is displayed, it restricts or controls the main regulation based on both vehicle type and weight. Only goods vehicles that are above the indicated GVM threshold must comply with the restriction. The key rule is: the main sign applies only to goods vehicles over the specified mass limit. How It Works in Practice The main regulatory sign sets the rule (e.g., access restriction, lane use, parking control) The secondary panel specifies a GVM threshold (e.g., “OVER 3 500 kg”) Only heavy goods vehicles exceeding that mass must comply Lighter vehicles and non-goods vehicles are not affected unless otherwise indicated Driver Responsibilities Check your vehicle’s Gross Vehicle Mass rating before entering restricted areas Comply with the restriction only if your goods vehicle exceeds the indicated GVM Do not assume all goods vehicles are treated the same Pay attention to whether the limit is “over” or “under” a specific mass Where You Will See This Sign This sign is commonly used: On bridges and roads with structural weight limits In urban areas restricting heavy freight traffic Near residential zones limiting heavy goods vehicles At industrial or logistics route control points Purpose of the Sign The purpose of the Goods Vehicle Over Indicated GVM Sign is to protect road infrastructure and improve safety by limiting certain traffic rules to heavier goods vehicles that may cause greater wear or congestion. Common Mistakes to Avoid Entering restricted roads without checking your vehicle’s GVM Misinterpreting “over” as applying to all goods vehicles Confusing loaded weight with registered GVM Ignoring weight-based restrictions on bridges or urban roads Safety Tips Know your vehicle’s official GVM rating Check signage carefully before entering restricted routes Use alternative routes if your vehicle exceeds the limit Be extra cautious when driving loaded freight vehicles Penalties for Ignoring the Sign Ignoring a Goods Vehicle Over Indicated GVM Sign may result in: Traffic fines or enforcement penalties Damage liability to infrastructure (e.g., bridges, roads) Restricted access or vehicle removal Increased safety risks for all road users Summary The Goods Vehicle Over Indicated GVM Sign in South Africa limits certain traffic rules to goods vehicles exceeding a specified mass. It helps protect infrastructure and manage heavy vehicle movement safely and efficiently.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of construction vehicles.

If you are a construction vehicle driver, you need to comply with the primary sign.

Overview The Construction Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction on the main sign applies specifically to drivers of construction vehicles. What the Sign Means When this sign is displayed, it limits the effect of the main regulatory sign to vehicles used in construction activities (such as tipper trucks, excavators on transporters, or site service vehicles). Other road users are not affected unless separate signage applies. The key rule is: the main sign applies only to construction vehicles. How It Works in Practice The main regulatory sign defines the rule (e.g., access control, stopping, parking, or lane use) The “Construction Vehicle” panel specifies which vehicles are affected Only vehicles involved in construction operations must comply Other vehicles follow normal traffic regulations unless otherwise indicated Driver Responsibilities Construction drivers: Must follow the instruction on the main sign Other motorists: Should not assume the restriction applies to them Always read both the main sign and the secondary panel together Be aware of site-specific traffic rules near construction zones Where You Will See This Sign This sign is commonly used: At construction sites and roadworks areas On access roads leading to building or infrastructure projects In temporary traffic management zones Near heavy equipment staging or loading areas Purpose of the Sign The purpose of the Construction Vehicle Sign is to regulate the movement and behaviour of construction-related traffic, ensuring safety and efficiency in and around active work zones. Common Mistakes to Avoid Non-construction vehicles entering restricted work zones Construction drivers ignoring site traffic instructions Misinterpreting general road rules near construction areas Failing to recognise vehicle-specific restrictions Safety Tips Approach construction zones with extra caution Follow all site-specific signage and instructions Be aware of heavy machinery and slow-moving vehicles Maintain safe distances within work areas Penalties for Ignoring the Sign Ignoring a Construction Vehicle Sign may result in: Fines or traffic enforcement actions Restricted access to construction areas Safety incidents involving heavy equipment Delays or removal from site operations Summary The Construction Vehicle Sign in South Africa indicates that a traffic regulation applies only to construction vehicles. It helps ensure safe and organised movement within and around construction zones.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of vehicles conveying dangerous goods.

If you are a driver of a vehicle conveying dangerous goods, you need to comply with the primary sign.

Overview The Vehicle Conveying Dangerous Goods Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the rule shown on the main sign applies specifically to vehicles transporting dangerous goods. What the Sign Means When this sign is displayed, it limits the applicability of the main regulatory instruction to vehicles carrying hazardous or dangerous substances (such as flammable liquids, gases, toxic chemicals, or explosives). Other vehicles are not affected unless separately indicated. The key rule is: the main regulation applies only to vehicles conveying dangerous goods. How It Works in Practice The main regulatory sign defines the rule (e.g., route restriction, parking control, or access limitation) The secondary panel specifies that only hazardous materials transport vehicles are affected Only vehicles carrying dangerous goods must comply with the restriction Other road users follow general traffic rules unless otherwise indicated Driver Responsibilities Dangerous goods drivers: Must strictly comply with the instruction on the main sign Ensure all transport complies with hazardous materials regulations Other drivers: Should not assume the restriction applies to them Always read both the main sign and the secondary panel together Where You Will See This Sign This sign is commonly used: On designated hazardous goods transport routes Near industrial zones and chemical facilities In tunnel or bridge approaches with safety restrictions At ports, depots, or logistics hubs handling dangerous materials Purpose of the Sign The purpose of the Vehicle Conveying Dangerous Goods Sign is to ensure the safe routing and control of hazardous materials transport, reducing risks to people, infrastructure, and the environment. Common Mistakes to Avoid Entering restricted routes without proper hazardous goods authorization Ignoring special routing requirements for dangerous materials Confusing general freight vehicles with hazardous goods carriers Failing to follow emergency transport regulations Safety Tips Always confirm whether your load is classified as dangerous goods Follow approved routes and signage strictly Ensure all safety documentation is in place Avoid restricted structures like certain tunnels or bridges if prohibited Penalties for Ignoring the Sign Ignoring a Vehicle Conveying Dangerous Goods Sign may result in: Severe fines and regulatory penalties Immediate removal from restricted routes Increased liability for safety incidents or spills Legal action under hazardous materials transport laws Summary The Vehicle Conveying Dangerous Goods Sign in South Africa restricts certain traffic rules to vehicles transporting hazardous materials. It plays a critical role in ensuring the safe and controlled movement of dangerous goods on public roads.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of abnormal vehicles.

If you are a driver of an abnormal vehicle, you need to comply with the primary sign.

Overview The Abnormal Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction shown on the main sign applies specifically to drivers of abnormal vehicles. What the Sign Means When this sign is displayed, it limits the applicability of the main regulatory sign to abnormal vehicles only—typically vehicles that exceed legal dimensions or weight limits (such as oversized loads or special transport equipment). The key rule is: the main regulation applies only to abnormal vehicles. How It Works in Practice The main regulatory sign defines the restriction (e.g., route limitation, access control, parking restriction) The “Abnormal Vehicle” panel specifies that only abnormal or oversized vehicles are affected Normal vehicles follow standard traffic rules unless otherwise indicated Driver Responsibilities Abnormal vehicle drivers: Must comply with the instruction on the main sign and any permit conditions Other motorists: Should not assume the restriction applies to them Always read both the main sign and secondary panel together Ensure compliance with permit and escort requirements where applicable Where You Will See This Sign This sign is commonly used: On designated routes for heavy or oversized transport Near industrial zones and freight corridors At road infrastructure with clearance or weight limitations Along approved abnormal load transport paths Purpose of the Sign The purpose of the Abnormal Vehicle Sign is to regulate the movement of oversized or overweight vehicles, ensuring they follow approved routes and safety requirements to protect infrastructure and other road users. Common Mistakes to Avoid Normal vehicles assuming restrictions apply to them Abnormal vehicles using non-approved routes Ignoring escort or permit requirements Misunderstanding clearance or weight limitations Safety Tips Abnormal vehicles should always follow approved transport permits Check route restrictions carefully before travel Use escort vehicles where required Plan routes to avoid low bridges or restricted roads Penalties for Ignoring the Sign Ignoring an Abnormal Vehicle Sign may result in: Fines or legal enforcement action Route violations or permit breaches Damage to infrastructure (bridges, roads, overhead structures) Delays or seizure of transport operations Summary The Abnormal Vehicle Sign in South Africa indicates that a traffic regulation applies only to abnormal or oversized vehicles. It ensures that such vehicles operate safely and within approved transport conditions.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to operators of Rickshaws.

If you are an operator of a Rickshaw, you need to comply with the primary sign.

Overview The Rickshaw Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction on the main sign applies specifically to operators of rickshaws. What the Sign Means When this sign is displayed, it limits the effect of the main regulatory sign to rickshaws only. Rickshaws are typically human-powered or cycle-based passenger vehicles used in certain tourist or local transport settings. The key rule is: the main regulation applies only to rickshaw operators. How It Works in Practice The main regulatory sign defines the rule (e.g., parking restriction, access control, stopping zone, or lane use) The “Rickshaw” panel specifies that only rickshaw operators must follow the rule Other road users are not affected unless separately indicated Driver Responsibilities Rickshaw operators: Must comply with the instruction on the main sign Other drivers: Should not assume the restriction applies to them Always read both the main sign and secondary panel together Be aware of shared or tourist transport zones where rickshaws operate Where You Will See This Sign This sign is commonly used: In tourist areas and city centres Near pedestrian-friendly zones or promenades At designated rickshaw pickup or drop-off points In controlled urban transport areas where non-motorised vehicles operate Purpose of the Sign The purpose of the Rickshaw Sign is to regulate the movement and operation of rickshaws in specific areas, ensuring safe and organised interaction with other road users and pedestrians. Common Mistakes to Avoid Non-rickshaw vehicles entering reserved rickshaw zones Rickshaw operators ignoring designated stopping or operating rules Misinterpreting the sign as applying to all cyclists or vehicles Blocking pedestrian or tourist areas Safety Tips Rickshaw operators should remain in designated operating areas Be mindful of pedestrians in tourist zones Follow all local transport regulations for non-motorised vehicles Ensure safe interaction with motor vehicles in shared spaces Penalties for Ignoring the Sign Ignoring a Rickshaw Sign may result in: Fines or enforcement action Removal from restricted operating zones Loss of operating permissions in regulated areas Safety risks in pedestrian-heavy environments Summary The Rickshaw Sign in South Africa indicates that a traffic regulation applies only to rickshaw operators. It helps manage non-motorised passenger transport safely within designated urban or tourist areas.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of tour buses.

If you are a driver of a tour bus, you need to comply with the primary sign.

Overview The Tour Bus Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction shown on the main sign applies specifically to drivers of tour buses. What the Sign Means When this sign is displayed, it limits the effect of the main regulatory sign to tour buses only—typically buses used for sightseeing, guided travel, or organised passenger tours. The key rule is: the main regulation applies only to tour buses. How It Works in Practice The main regulatory sign sets the rule (e.g., stopping, parking, loading, or access control) The “Tour Bus” panel specifies that only tour bus operators must comply Other vehicles are not affected unless separately indicated Driver Responsibilities Tour bus drivers: Must comply with the instruction on the main sign Other drivers: Should not assume the restriction applies to them Always read both the main sign and the secondary panel together Ensure compliance when operating passenger tour services Where You Will See This Sign This sign is commonly used: At tourist attractions and landmarks Near hotels, airports, and cruise terminals In designated tour bus loading and drop-off zones In busy city tourism districts Purpose of the Sign The purpose of the Tour Bus Sign is to manage traffic flow and passenger operations for organised tour transport, ensuring safe and efficient loading, unloading, and parking of tour buses in high-traffic tourist areas. Common Mistakes to Avoid Non-tour vehicles using reserved tour bus areas Tour buses ignoring designated stopping or parking rules Misinterpreting general bus rules as applying to tour buses Blocking tourist loading zones unnecessarily Safety Tips Tour bus drivers should use only designated pickup/drop-off points Keep passenger areas clear for safe boarding and alighting Be aware of pedestrian activity in tourist zones Follow all time and location restrictions carefully Penalties for Ignoring the Sign Ignoring a Tour Bus Sign may result in: Parking or stopping fines Removal from designated tour bus areas Obstruction violations in tourist zones Disruption of organised passenger transport operations Summary The Tour Bus Sign in South Africa indicates that a traffic regulation applies only to tour buses. It helps manage tourist transport efficiently while ensuring safety and order in busy visitor areas.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of high occupancy vehicles.

If you are a driver of a high occupancy vehicle, you need to comply with the primary sign.

Overview The High Occupancy Vehicle (HOV) Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the rule shown on the main sign applies specifically to high occupancy vehicles—vehicles carrying a minimum number of passengers. What the Sign Means When this sign is displayed, it limits the applicability of the main regulation to vehicles with multiple occupants (for example, cars with two or more passengers, depending on the specific rule). These lanes or restrictions are designed to encourage carpooling and reduce congestion. The key rule is: the main regulation applies only to high occupancy vehicles. How It Works in Practice The main regulatory sign defines the rule (e.g., lane usage, priority movement, or access control) The HOV panel specifies that only vehicles meeting the occupancy requirement must follow the rule Vehicles with fewer occupants are excluded unless otherwise indicated Driver Responsibilities HOV drivers: Must ensure their vehicle meets the minimum passenger requirement Use designated lanes or comply with restrictions only if eligible Other drivers: Should not enter HOV-restricted areas unless permitted Always confirm occupancy rules before using HOV lanes or zones Where You Will See This Sign This sign is commonly used: On urban highways and expressways In dedicated HOV lanes during peak traffic hours In congestion-managed city corridors Near major commuter routes into business districts Purpose of the Sign The purpose of the High Occupancy Vehicle Sign is to reduce traffic congestion and environmental impact by encouraging shared vehicle use and prioritising vehicles carrying multiple passengers. Common Mistakes to Avoid Using HOV lanes without meeting occupancy requirements Miscounting passengers or misunderstanding eligibility rules Assuming motorcycles or taxis are automatically included Ignoring time-based HOV restrictions Safety Tips Always confirm the minimum passenger requirement before entering Check for time-of-day HOV restrictions Do not weave in and out of HOV lanes unsafely Be aware of enforcement cameras or patrols Penalties for Ignoring the Sign Ignoring a High Occupancy Vehicle Sign may result in: Traffic fines or automated enforcement penalties Restricted lane violations Increased congestion and unsafe lane changes Summary The High Occupancy Vehicle Sign in South Africa indicates that a traffic regulation applies only to vehicles carrying multiple passengers. It helps improve traffic flow, reduce congestion, and encourage carpooling on busy routes.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of emergency vehicles.

If you are a driver of an emergency vehicle, you need to comply with the primary sign.

Overview The Emergency Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction shown on the main sign applies specifically to drivers of emergency vehicles. What the Sign Means When this sign is used, it limits the effect of the main regulatory sign to emergency vehicles only—such as ambulances, fire engines, and rescue vehicles responding to incidents. The key rule is: the main regulation applies only to emergency vehicles. How It Works in Practice The main regulatory sign defines the rule (e.g., stopping restriction, lane use, access control) The “Emergency Vehicle” panel specifies that only emergency service vehicles must comply Other road users follow standard traffic regulations unless otherwise indicated Driver Responsibilities Emergency vehicle drivers: Must comply with the instruction on the main sign when not operating under active emergency conditions Other motorists: Should not assume the restriction applies to them Always read both the main sign and secondary panel together Give way to emergency vehicles when they are responding to incidents with lights and sirens Where You Will See This Sign This sign is commonly used: Near hospitals and emergency service stations At fire stations, ambulance bays, and rescue facilities In controlled-access emergency response zones On roads with designated emergency-only access or lanes Purpose of the Sign The purpose of the Emergency Vehicle Sign is to regulate traffic conditions specifically for emergency services, ensuring they can operate safely and efficiently while still complying with road rules when not responding to emergencies. Common Mistakes to Avoid Non-emergency vehicles entering emergency-only areas Assuming emergency vehicles always ignore all restrictions Blocking emergency access routes Misinterpreting signage in hospital or fire station zones Safety Tips Always keep emergency lanes and access points clear Yield immediately to emergency vehicles in active response Be alert near hospitals and emergency facilities Follow all signage carefully, especially in restricted zones Penalties for Ignoring the Sign Ignoring an Emergency Vehicle Sign may result in: Fines or traffic violations Obstruction of emergency response operations Delays in life-saving services Increased legal liability in emergency interference cases Summary The Emergency Vehicle Sign in South Africa indicates that a traffic regulation applies only to emergency vehicles. It ensures that emergency services operate safely and efficiently while maintaining proper road discipline.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of police vehicles.

If you are a driver of a police vehicle, you need to comply with the primary sign.

Overview The Police Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction shown on the main sign applies specifically to drivers of police vehicles. What the Sign Means When this sign is displayed, it limits the effect of the main regulatory sign to authorised police vehicles only. These may include patrol cars, response units, or other officially marked or designated law enforcement vehicles. The key rule is: the main regulation applies only to police vehicles. How It Works in Practice The main regulatory sign sets the rule (e.g., parking restriction, lane use, stopping control, or access limitation) The “Police Vehicle” panel specifies that only police vehicles must comply with the rule Other road users are not affected unless separate signage applies Driver Responsibilities Police drivers: Must comply with the instruction when applicable to operational requirements Other motorists: Should not assume the restriction applies to them Always read both the main sign and secondary panel together Be aware that emergency vehicles may still operate under broader legal exemptions in certain situations Where You Will See This Sign This sign is commonly used: At police stations and secure facilities In designated police parking or standby zones Near court buildings or law enforcement operational areas In restricted access areas requiring controlled vehicle entry Purpose of the Sign The purpose of the Police Vehicle Sign is to regulate access or movement of police vehicles in specific locations, ensuring efficient deployment and organisation of law enforcement operations. Common Mistakes to Avoid Non-police vehicles entering reserved police-only areas Misinterpreting emergency vehicle privileges as general access rights Ignoring restrictions in secure or operational zones Assuming all emergency vehicles are subject to the same signage rules Safety Tips Give way to police vehicles when they are responding to emergencies Avoid entering marked police-only zones without authorisation Be aware of controlled-access areas around official buildings Always observe all regulatory signage in secure environments Penalties for Ignoring the Sign Ignoring a Police Vehicle Sign may result in: Fines or enforcement action Removal from restricted or secure areas Obstruction of law enforcement operations Potential legal consequences in controlled facilities Summary The Police Vehicle Sign in South Africa indicates that a traffic regulation applies only to police vehicles. It helps manage operational efficiency and secure access within law enforcement environments.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of vehicles carrying disabled persons.

If you are a driver of a vehicle carrying a disabled person, you need to comply with the primary sign.

Overview The Disabled Persons Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction shown on the main sign applies specifically to vehicles carrying disabled persons. What the Sign Means When this sign is displayed, it limits the effect of the main regulatory sign to vehicles transporting disabled persons (including drivers or passengers with disabilities who require accessible transport). The key rule is: the main regulation applies only to vehicles carrying disabled persons. How It Works in Practice The main regulatory sign sets the rule (e.g., parking restriction, access control, stopping rules) The “Disabled Persons Vehicle” panel specifies which vehicles are affected Only vehicles carrying disabled persons must comply with the restriction or are granted the specified privilege Other vehicles are not affected unless separately indicated Driver Responsibilities Eligible drivers: Must comply with or may use the designated provisions when transporting a disabled person Other motorists: Should not use reserved spaces or privileges intended for disabled persons’ transport Always read both the main sign and secondary panel together Ensure proper identification or permit is displayed where required Where You Will See This Sign This sign is commonly used: In designated disabled parking areas Near hospitals, clinics, and care facilities At public buildings and shopping centres In areas with accessibility-focused traffic management Purpose of the Sign The purpose of the Disabled Persons Vehicle Sign is to ensure accessible and fair use of parking and traffic facilities for vehicles transporting disabled persons, improving mobility and convenience for those who need assistance. Common Mistakes to Avoid Unauthorised vehicles using disabled persons’ parking or access zones Misunderstanding eligibility requirements Failing to display required permits or badges Blocking accessible parking spaces Safety Tips Only use disabled persons’ facilities when properly authorised Ensure accessibility spaces remain clear and unobstructed Display permits clearly when required Be mindful of pedestrian accessibility near these areas Penalties for Ignoring the Sign Ignoring a Disabled Persons Vehicle Sign may result in: Fines or parking violations Towing or removal from designated spaces Restricted access to facilities Increased penalties for misuse of disability parking provisions Summary The Disabled Persons Vehicle Sign in South Africa indicates that a traffic regulation applies only to vehicles carrying disabled persons. It helps ensure accessibility, fairness, and proper use of designated transport facilities.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of diplomation (Authorized) vehicled.

If you are a driver of a diplomatic (Authorized) vehicle, you need to comply with the primary sign.

Overview The Authorised Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction on the main sign applies specifically to authorised (diplomatic or officially permitted) vehicles. What the Sign Means When this sign is displayed, the main regulation is limited to vehicles that have official authorisation, typically including diplomatic vehicles or other specially permitted government or institutional vehicles. Other road users are not affected unless separately indicated. The key rule is: the main sign applies only to authorised vehicles. How It Works in Practice The main regulatory sign sets the rule (e.g., parking restriction, access control, stopping limitation, or lane use) The “Authorised Vehicle” panel defines which vehicles are affected (e.g., diplomatic plates or official permits) Only those vehicles with valid authorisation must comply with the restriction Other road users follow normal traffic rules unless otherwise signed Driver Responsibilities Authorised/diplomatic drivers: Must comply with the instruction when operating within the defined rule Ensure valid authorisation or accreditation is displayed or recognised Other drivers: Should not assume the restriction applies to them Always read both the main sign and secondary panel together Where You Will See This Sign This sign is commonly used: At embassies and consular buildings In government precincts and secure administrative areas At diplomatic parking bays or reserved zones Near high-security or official protocol areas Purpose of the Sign The purpose of the Authorised Vehicle Sign is to regulate access and movement of specially permitted vehicles, such as diplomatic or official government transport, ensuring security and controlled access in sensitive areas. Common Mistakes to Avoid Unauthorised vehicles entering reserved diplomatic or official zones Misunderstanding diplomatic privileges as general public access Ignoring access control rules in secure government areas Confusing authorised vehicle signage with general parking instructions Safety Tips Respect all restricted-access and diplomatic zones Do not enter areas unless clearly authorised Be aware of increased security enforcement in such locations Follow instructions from security or traffic officials Penalties for Ignoring the Sign Ignoring an Authorised Vehicle Sign may result in: Fines or enforcement action Removal or towing from restricted areas Security violations in protected zones Potential legal consequences in diplomatic or government precincts Summary The Authorised Vehicle Sign in South Africa indicates that a traffic regulation applies only to officially authorised vehicles, including diplomatic or government transport. It helps maintain security and controlled access in sensitive and high-level administrative areas.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers of agricultural vehicles.

If you are a driver of an agricultural vehicle, you need to comply with the primary sign.

Overview The Agricultural Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction shown on the main sign applies specifically to drivers of agricultural vehicles. What the Sign Means When this sign is displayed, it limits the applicability of the main regulatory sign to agricultural vehicles only. These typically include tractors, combine harvesters, farm trucks, and other vehicles used in farming or agricultural operations. The key rule is: the main regulation applies only to agricultural vehicles. How It Works in Practice The main regulatory sign defines the rule (e.g., access restriction, speed control, parking limitation) The “Agricultural Vehicle” panel specifies that only farm-related vehicles must comply Other road users follow general traffic rules unless separately indicated Driver Responsibilities Agricultural drivers: Must comply with the instruction on the main sign when operating on public roads Other motorists: Should not assume the restriction applies to them Always read both the main sign and the secondary panel together Ensure safe operation of slow-moving agricultural equipment on public roads Where You Will See This Sign This sign is commonly used: In rural areas and farming regions Near agricultural access roads and farm entrances On routes shared between farm and public traffic In areas where specific rules apply to slow-moving farm vehicles Purpose of the Sign The purpose of the Agricultural Vehicle Sign is to regulate the movement and behaviour of farm vehicles on public roads, improving safety and traffic flow where slow-moving or wide agricultural machinery is present. Common Mistakes to Avoid Other vehicles incorrectly following agricultural-only restrictions Agricultural vehicles entering roads without proper awareness of speed or size limits Misinterpreting general rural road signs Overlooking slow-moving vehicle hazards Safety Tips Farm vehicles should use warning lights or reflective markings where required Motorists should be cautious when overtaking slow agricultural vehicles Always anticipate lower speeds on rural routes Check signage carefully in farming areas Penalties for Ignoring the Sign Ignoring an Agricultural Vehicle Sign may result in: Fines or traffic violations Unsafe overtaking or collision risks Damage to agricultural operations or equipment Delays or obstruction of farming activities Summary The Agricultural Vehicle Sign in South Africa indicates that a traffic regulation applies only to agricultural vehicles. It helps ensure safe interaction between farm machinery and general road traffic, especially in rural areas.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to operators of animal-drawn vehicles.

If you are an operator of an animal-drawn vehicle, you need to comply with the primary sign.

Overview The Animal-Drawn Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction on the main sign applies specifically to operators of animal-drawn vehicles (such as carts or wagons pulled by horses, donkeys, oxen, or similar animals). What the Sign Means When this sign is displayed, the main regulatory instruction is limited to animal-drawn transport only. Other road users, such as motor vehicles, motorcycles, and bicycles, are not affected unless separately indicated. The key rule is: the main regulation applies only to animal-drawn vehicles. How It Works in Practice The main regulatory sign sets the rule (e.g., access restriction, stopping control, lane use, or parking limitation) The secondary panel identifies animal-drawn vehicles as the only affected category Only operators of such vehicles must comply with the restriction Other road users follow standard road rules unless otherwise signed Driver (Operator) Responsibilities Animal-drawn vehicle operators: Must comply with the instruction on the main sign Ensure animals and vehicles are guided safely and appropriately within restrictions Other motorists: Should not assume the restriction applies to them Always read both the main sign and the secondary panel together Where You Will See This Sign This sign is commonly used: In rural or semi-rural areas On roads shared with agricultural transport Near farming communities or informal transport routes In zones where mixed traffic (motorised and non-motorised) is present Purpose of the Sign The purpose of the Animal-Drawn Vehicle Sign is to regulate the movement and behaviour of non-motorised, animal-powered transport, improving safety and reducing conflict with faster motorised traffic. Common Mistakes to Avoid Misinterpreting restrictions as applying to all vehicles Animal-drawn vehicles entering high-speed roads without permission Ignoring safety considerations for animals in traffic environments Motorists failing to anticipate slow-moving vehicles Safety Tips Motorists should reduce speed when approaching animal-drawn vehicles Operators should keep to safe, designated routes where available Ensure visibility (reflective markings or lighting at night) Maintain safe distance when overtaking Penalties for Ignoring the Sign Ignoring an Animal-Drawn Vehicle Sign may result in: Fines for non-compliance with traffic regulations Increased risk of collisions in shared traffic zones Liability for accidents involving vulnerable road users Summary The Animal-Drawn Vehicle Sign in South Africa indicates that a traffic regulation applies only to operators of animal-drawn transport. It helps manage safe interaction between slow-moving, non-motorised transport and modern vehicles, especially in rural or mixed-traffic areas.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to drivers towing vehicles.

If you are a driver towing another vehicle, you need to comply with the primary sign.

Overview The Towed Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction shown on the main sign applies specifically to drivers of vehicles that are towing another vehicle or trailer. What the Sign Means When this sign is displayed, it limits the applicability of the main regulation to vehicles engaged in towing. This includes passenger vehicles towing trailers, caravans, or other vehicles, as well as commercial towing operations where relevant. The key rule is: the main regulation applies only to vehicles towing another vehicle or trailer. How It Works in Practice The main regulatory sign defines the rule (e.g., speed limit, lane restriction, access control, or parking rule) The “Towed Vehicle” panel specifies that only towing combinations must comply Non-towing vehicles are not affected unless otherwise indicated Driver Responsibilities Drivers towing vehicles: Must comply with the instruction on the main sign Non-towing drivers: Should not assume the restriction applies to them Always read both the main sign and secondary panel together Ensure safe towing practices, especially regarding speed and braking distance Where You Will See This Sign This sign is commonly used: On highways and long-distance routes In areas with steep gradients or tight curves Near holiday routes where caravans and trailers are common At controlled-access roads with towing restrictions Purpose of the Sign The purpose of the Towed Vehicle Sign is to improve road safety by applying specific rules to vehicles with trailers or towed loads, which have different handling, braking, and stability requirements. Common Mistakes to Avoid Ignoring towing-specific speed or lane restrictions Overloading trailers while towing Misjudging braking distance when towing Assuming general vehicle rules apply equally to towing combinations Safety Tips Maintain reduced speeds when towing, especially downhill Ensure trailers are properly secured and balanced Allow extra stopping distance Be cautious when overtaking or being overtaken Penalties for Ignoring the Sign Ignoring a Towed Vehicle Sign may result in: Fines or traffic violations Increased accident risk due to poor vehicle control Overloading or unsafe towing penalties Possible insurance complications in the event of a crash Summary The Towed Vehicle Sign in South Africa indicates that a traffic regulation applies only to vehicles towing another vehicle or trailer. It helps improve safety by addressing the unique risks associated with towing on public roads.

Below the appropriate regulatory sign.

To indicate that the primary sign applies to operators of Trams.

If you are an operator of a Tram, you need to comply with the primary sign.

Overview The Tram Vehicle Sign (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the instruction or restriction on the main sign applies specifically to tram operators. What the Sign Means When this sign is displayed, the main regulatory rule is limited to trams only. It applies to rail-based street-running vehicles that operate on fixed tracks within urban road environments. The key rule is: the main regulation applies only to tram vehicles. How It Works in Practice The main regulatory sign defines the rule (e.g., lane use, priority movement, stopping restrictions, or access control) The secondary panel specifies that only tram operators must comply Other road users follow standard road rules unless otherwise indicated Operator Responsibilities Tram operators: Must comply with the instruction on the main sign while operating on shared road infrastructure Ensure safe interaction with pedestrians and vehicles in urban environments Other drivers: Should not assume the restriction applies to them Always read both the main sign and the secondary panel together Where You Will See This Sign This sign is commonly used: In cities with tram or light rail systems On streets shared between trams and road traffic At tram crossings and intersections Near tram stops or dedicated tram corridors Purpose of the Sign The purpose of the Tram Vehicle Sign is to regulate tram operations within mixed traffic environments, ensuring safe, predictable movement of rail-based vehicles alongside other road users. Common Mistakes to Avoid Misinterpreting tram-only rules as applying to all vehicles Blocking tram lanes or tracks Failing to give priority to trams where required Stopping or parking on tram infrastructure Safety Tips Always keep clear of tram tracks unless crossing safely Give way to trams where indicated by signage or markings Be cautious at tram stops and intersections Expect trams to have limited ability to change direction or stop quickly Penalties for Ignoring the Sign Ignoring a Tram Vehicle Sign may result in: Traffic fines or enforcement penalties Obstruction of tram operations Increased risk of serious collisions Liability for damage or disruption to public transport systems Summary The Tram Vehicle Sign in South Africa indicates that a traffic regulation applies only to tram operators. It helps ensure safe and efficient integration of tram systems within urban road networks.