At intersections.

To prohibit drivers from stopping in the demarcated area because this could prevent other traffic from turning or driving further forward.

Do not stop in the demarcated box and make sure that you will be able to drive through the intersection before entering the intersection.

Overview The Longitudinal Regulatory Markings (South Africa) – Box Junction Marking are yellow criss-cross road markings painted within an intersection to control congestion and prevent vehicles from blocking traffic flow. What the Marking Means A box junction indicates an area inside an intersection where vehicles are not allowed to stop. Drivers may only enter the box if their exit on the other side is clear. The key purpose is: to prevent gridlock by ensuring that vehicles do not block intersections. How It Works in Practice The box marking is located in the centre of an intersection. Vehicles must not enter unless their path through the intersection is clear. Stopping inside the box is prohibited, even if traffic ahead slows down. It keeps turning and crossing traffic moving smoothly. Driver Responsibilities Only enter the box junction if you can fully clear it Do not stop inside the marked area under any normal circumstances Wait before entering if traffic ahead is blocked Keep intersections clear for turning and crossing traffic Where You Will See This Marking Busy urban intersections Signal-controlled junctions High-traffic city roads Intersections prone to congestion or blocking Purpose of the Marking Box junction markings improve traffic flow by preventing vehicles from entering intersections they cannot clear, reducing congestion and gridlock in busy road networks. Common Mistakes to Avoid Entering the box when the exit is blocked Stopping in the middle of the intersection Blocking turning vehicles from crossing Misjudging traffic flow and entering too early Safety Tips Always check that the far side of the intersection is clear Wait behind the stop line if traffic is congested Do not rely on other drivers to clear space for you Be especially cautious during peak traffic times Penalties for Ignoring the Marking Misusing a box junction may result in: Traffic fines for obstruction Being responsible for intersection blocking Increased risk of collisions in congested areas Charges for negligent or inconsiderate driving Summary The box junction marking in South Africa prevents drivers from stopping inside intersections. Drivers must only enter when they can fully clear the junction, ensuring smooth and safe traffic flow.

On any road before a pedestrian crossing.

To indicate an area where you may not stop except for pedestrians crossing or wanting to cross the road or for a vehicle that has already stopped.

Look out for pedestrians that may cross the road, slow down and stop if someone wants to cross the road. Do not overtake inside this area or a vehicle that has stopped at any pedestrian crossing.

Overview The Longitudinal Regulatory Markings (South Africa) – Zig-Zag Zone Marking is used on roads approaching pedestrian crossings to create a clear safety buffer zone where stopping and certain manoeuvres are restricted. What the Marking Means This zig-zag marking indicates a controlled area where stopping is generally prohibited, except under specific conditions related to pedestrians or already-stationary vehicles at the crossing. It helps keep pedestrian crossings visible and safe. How It Works in Practice Appears before pedestrian crossings, usually in urban areas. Creates a clear approach zone for pedestrian safety. Prevents vehicles from blocking visibility near crossings. Ensures drivers slow down and stay alert for pedestrians. Where Stopping is Allowed You may only stop in the zig-zag zone if: Pedestrians are crossing or intending to cross A vehicle has already stopped at the pedestrian crossing Driver Responsibilities Slow down when entering the zig-zag area Be prepared to stop for pedestrians at any time Do not overtake within the zig-zag zone Do not pass vehicles that are stopped at a pedestrian crossing Where You Will See This Marking This marking is commonly found: Before pedestrian crossings in urban areas Near schools and high pedestrian activity zones At intersections with zebra crossings In residential and shopping areas Purpose of the Marking The purpose of the zig-zag zone marking is to improve pedestrian safety by keeping the area before crossings clear of unnecessary stopping and overtaking, ensuring good visibility for both drivers and pedestrians. Common Mistakes to Avoid Stopping in the zig-zag zone without a valid reason Overtaking vehicles near pedestrian crossings Driving too fast through the marked area Blocking visibility of pedestrians at crossings Safety Tips Always slow down when approaching zig-zag markings Watch carefully for pedestrians stepping onto the road Keep crossings clear and unobstructed Stop only when necessary and legally permitted Penalties for Ignoring the Marking Ignoring zig-zag zone markings may result in: Traffic fines for illegal stopping or overtaking Increased risk of pedestrian collisions Obstruction of pedestrian crossings Legal consequences for unsafe driving behaviour Summary The zig-zag zone marking in South Africa protects pedestrian crossings by keeping the approach area clear. Drivers must not overtake or stop unnecessarily and must always give priority to pedestrians crossing the road.

On any road.

To prohibit drivers from stopping where stationary vehicles may disrupt the traffic or where the environment obstructs the view and such vehicles may obstruct the view more.

Except in any emergency, do not stop at these lines. In the case of a broken line, you may not stop during the times indicated by a road traffic sign.

Overview The Longitudinal Regulatory Markings (South Africa) – No Stopping Line Marking are road markings used to prohibit vehicles from stopping in specific areas where it would be unsafe or disruptive to traffic flow. What the Marking Means A no stopping line indicates that drivers must not stop their vehicle at any point along the marked section of road. This includes brief stops, except in emergencies. The key purpose is: to prevent vehicles from stopping in locations where they could obstruct traffic flow or reduce visibility and road safety. How It Works in Practice Stopping is prohibited along the entire marked section. It is typically used in areas where visibility is limited or traffic must flow continuously. Stopping could create a hazard or block other vehicles. In some cases, broken lines may apply time-based restrictions indicated by road signs. Driver Responsibilities Do not stop your vehicle on a no stopping line Only stop in a genuine emergency Observe additional time-based restrictions where applicable Keep traffic lanes clear and unobstructed Where You Will See This Marking Busy urban roads and intersections Areas with limited visibility (curves, bridges, hills) Freeways and high-speed roads Zones where stopping would disrupt traffic flow Purpose of the Marking No stopping markings improve safety and traffic efficiency by ensuring vehicles do not halt in dangerous or high-flow areas where obstruction or reduced visibility could lead to accidents. Common Mistakes to Avoid Stopping briefly “just for a moment” Parking in a restricted no stopping zone Ignoring time-based restrictions on broken lines Stopping in areas with poor visibility or high-speed traffic Safety Tips Plan stopping locations in advance Use designated parking or stopping areas only Be especially cautious on high-speed or narrow roads Follow all supplementary signs linked to the marking Penalties for Ignoring the Marking Ignoring no stopping markings may result in: Traffic fines for illegal stopping or parking Vehicle obstruction of traffic flow Increased risk of rear-end or side collisions Possible towing of the vehicle in severe cases Summary The no stopping line marking in South Africa prohibits stopping along designated road sections to maintain safety and traffic flow. Drivers may only stop in emergencies or where specifically allowed by signage.

On any road.

To prohibit drivers from stopping where stationary vehicles may disrupt the traffic or where the environment obstructs the view and such vehicles may obstruct the view more.

Except in any emergency, do not stop at these lines. In the case of a broken line, you may not stop during the times indicated by a road traffic sign.

Overview The Longitudinal Regulatory Markings (South Africa) – Zig-Zag Zone Marking is used on roads approaching pedestrian crossings to create a clear safety buffer zone where stopping and certain manoeuvres are restricted. What the Marking Means This zig-zag marking indicates a controlled area where stopping is generally prohibited, except under specific conditions related to pedestrians or already-stationary vehicles at the crossing. It helps keep pedestrian crossings visible and safe. How It Works in Practice Appears before pedestrian crossings, usually in urban areas. Creates a clear approach zone for pedestrian safety. Prevents vehicles from blocking visibility near crossings. Ensures drivers slow down and stay alert for pedestrians. Where Stopping is Allowed You may only stop in the zig-zag zone if: Pedestrians are crossing or intending to cross A vehicle has already stopped at the pedestrian crossing Driver Responsibilities Slow down when entering the zig-zag area Be prepared to stop for pedestrians at any time Do not overtake within the zig-zag zone Do not pass vehicles that are stopped at a pedestrian crossing Where You Will See This Marking This marking is commonly found: Before pedestrian crossings in urban areas Near schools and high pedestrian activity zones At intersections with zebra crossings In residential and shopping areas Purpose of the Marking The purpose of the zig-zag zone marking is to improve pedestrian safety by keeping the area before crossings clear of unnecessary stopping and overtaking, ensuring good visibility for both drivers and pedestrians. Common Mistakes to Avoid Stopping in the zig-zag zone without a valid reason Overtaking vehicles near pedestrian crossings Driving too fast through the marked area Blocking visibility of pedestrians at crossings Safety Tips Always slow down when approaching zig-zag markings Watch carefully for pedestrians stepping onto the road Keep crossings clear and unobstructed Stop only when necessary and legally permitted Penalties for Ignoring the Marking Ignoring zig-zag zone markings may result in: Traffic fines for illegal stopping or overtaking Increased risk of pedestrian collisions Obstruction of pedestrian crossings Legal consequences for unsafe driving behaviour Summary The zig-zag zone marking in South Africa protects pedestrian crossings by keeping the approach area clear. Drivers must not overtake or stop unnecessarily and must always give priority to pedestrians crossing the road.

On any road.

To prevent drivers from stopping where stationary vehicles may disrupt the traffic, or where the environment obstructs the view and such vehicles obstruct the view more.

Expect an emergency, you may stop for short periods, but may not park here. Parking means that a vehicle is stationary (whether the engine is running or not ) for a longer period than is longer than that needed to on or off load goods or passengers.

Overview The Longitudinal Regulatory Markings (South Africa) – No Parking Line Marking is a road marking used to restrict parking in areas where stationary vehicles could create hazards or disrupt traffic flow. What the Marking Means This marking indicates that drivers are not allowed to park in the marked area. Stopping is only allowed for very short periods when necessary, such as emergencies or immediate passenger or goods loading/unloading. How It Works in Practice Identifies areas where parked vehicles would be unsafe or obstructive. Helps maintain clear visibility and smooth traffic flow. Reduces congestion in high-risk or narrow sections of road. Applies even if the vehicle’s engine is running. What “Parking” Means Parking refers to a vehicle being stationary for longer than necessary to pick up or drop off passengers or load/unload goods. Short stops for immediate activity are allowed, but extended stopping is not. Driver Responsibilities Do not park in areas marked with a no parking line Only stop briefly when necessary for loading or emergencies Keep traffic flow and visibility clear for other road users Move your vehicle immediately after completing necessary stops Where You Will See This Marking This marking is commonly found: Along busy urban roads Near intersections and bends In areas with limited visibility Where parked vehicles could obstruct traffic flow Purpose of the Marking The purpose of the no parking line marking is to prevent traffic obstruction, improve visibility, and enhance safety by ensuring that vehicles do not remain stationary in hazardous or high-traffic areas. Common Mistakes to Avoid Leaving a vehicle parked in a no parking zone Confusing short stops with permitted parking Blocking visibility for other road users Ignoring restrictions in busy traffic areas Safety Tips Only stop briefly when absolutely necessary Move your vehicle immediately after loading or unloading Choose safe and legal parking areas nearby Keep intersections and bends clear at all times Penalties for Ignoring the Marking Ignoring no parking line markings may result in: Parking fines or penalties Vehicle towing or clamping Traffic obstruction and congestion Increased risk of collisions due to poor visibility Summary The no parking line marking in South Africa prohibits parking in designated areas where stationary vehicles could create hazards. Only short, necessary stops are allowed, and drivers must move on immediately after completing their task.

On any road.

To prevent drivers from stopping where stationary vehicles may disrupt the traffic, or where the environment obstructs the view and such vehicles obstruct the view more.

Expect an emergency, you may stop for short periods, but may not park here. Parking means that a vehicle is stationary (whether the engine is running or not ) for a longer period than is longer than that needed to on or off load goods or passengers.

Overview The Longitudinal Regulatory Markings (South Africa) – No Parking Line Marking are road markings used to restrict vehicles from parking in areas where stationary vehicles could obstruct traffic flow or reduce visibility. What the Marking Means A no parking line indicates that vehicles may not be left stationary for extended periods along the marked section of road. Short stops for dropping off or picking up passengers may be allowed, but parking is prohibited. The key purpose is: to prevent long-term stopping of vehicles in areas where they could obstruct traffic movement or create safety hazards. How It Works in Practice Vehicles may stop briefly for loading or unloading passengers or goods. Parking (longer stationary periods) is not allowed. The restriction applies regardless of whether the engine is running. It helps maintain traffic flow and visibility on the road. Driver Responsibilities Do not leave your vehicle parked in a no parking zone Only stop briefly if necessary for pick-up or drop-off Move your vehicle immediately after completing the stop Observe additional restrictions from nearby road signs Where You Will See This Marking Busy urban streets Near intersections and junctions Areas with limited road space or visibility Commercial or high-traffic zones Purpose of the Marking No parking markings improve road safety and traffic flow by preventing vehicles from remaining stationary in locations where they could obstruct movement or reduce visibility for other road users. Common Mistakes to Avoid Leaving a vehicle parked “for a few minutes” in a restricted zone Confusing parking with short stopping for drop-off/pick-up Ignoring visibility hazards created by parked vehicles Using no parking areas as informal parking spaces Safety Tips Only stop briefly when absolutely necessary Always move your vehicle immediately after stopping Look for designated parking areas nearby Be cautious in high-traffic or low-visibility zones Penalties for Ignoring the Marking Violating no parking restrictions may result in: Traffic fines or penalties Vehicle towing or clamping Obstruction of traffic flow Increased risk of accidents due to reduced visibility Summary The no parking line marking in South Africa prohibits long-term vehicle parking in designated areas. Drivers may only stop briefly for loading or unloading, and must not leave their vehicle stationary beyond that purpose.

On the left-hand side of any road.

To indicate the limits within which only cyclists may travel.

Do no drive in the demarcated area.

Overview The Longitudinal Regulatory Markings (South Africa) – No Motor Cycles Marking is a road marking used to define a section of roadway that is reserved for cyclists, where motor cycles and other motor vehicles are not allowed. What the Marking Means This marking indicates a restricted lane or area on the left-hand side of the road that is reserved for cyclists only. Motor cycles and other motor vehicles may not enter or travel in this demarcated space. How It Works in Practice Creates a protected space for cyclists on busy roads. Improves safety by separating cyclists from motorised traffic. Usually marked along the left side of the roadway. Must be kept completely clear of motor vehicles. Driver Responsibilities Do not drive or ride a motor cycle in the marked area Keep to general traffic lanes at all times Be alert for cyclists travelling within the marked zone Give cyclists sufficient space when passing Where You Will See This Marking This marking is commonly found: On urban roads with cycle lanes Near schools, parks, and residential areas Along designated cycling routes In areas promoting non-motorised transport Purpose of the Marking The purpose of the no motor cycles marking is to protect cyclists by providing a dedicated and safe portion of the road, reducing the risk of conflict between bicycles and motorised vehicles. Common Mistakes to Avoid Driving or riding a motor cycle in the cycle lane Using the marked area for overtaking or parking Ignoring cyclists in the designated space Blocking the cycle lane at intersections Safety Tips Stay in your correct traffic lane Check mirrors and blind spots for cyclists Give cyclists plenty of passing space Approach cycle lanes with caution near intersections Penalties for Ignoring the Marking Ignoring no motor cycles or cycle lane markings may result in: Traffic fines for unauthorised lane use Increased risk of collisions with cyclists Dangerous driving behaviour charges in serious cases Endangerment of vulnerable road users Summary The no motor cycles marking in South Africa reserves a portion of the roadway for cyclists only. Motor cycles and other vehicles must stay out of the marked area to ensure cyclist safety and proper traffic separation.

At traffic circles and mini-circles.

To indicate the direction you must follow around the circle or mini-circle.

Only drive around the circle in the direction indicated by the arrows. Yield to traffic coming from your right hand side. At a mini-circle yield to traffic that reaches their yield line first before you reach yours. Drive slowly so that you can stop if someone does not yield.

Overview The Longitudinal Regulatory Markings (South Africa) – Mini-Circle Marking are road surface markings used at traffic circles and mini-circles to control vehicle movement and reinforce the correct direction of travel. What the Marking Means A mini-circle marking shows drivers the required circular direction of movement around the central island, usually indicated by arrows. It also reinforces right-of-way rules at these intersections. The key purpose is: to guide vehicles safely around a mini-circle and ensure correct yielding and traffic flow. How It Works in Practice Vehicles must travel around the circle in the direction indicated by arrows (usually clockwise in South Africa). Drivers must yield to traffic approaching from the right. At mini-circles, priority is given to the first vehicle that reaches the yield line. All drivers must approach slowly and be prepared to stop. Driver Responsibilities Follow the directional arrows around the circle Yield to vehicles coming from your right (or as marked) Approach at a safe, reduced speed Be prepared to stop if another driver fails to yield Where You Will See This Marking Mini-traffic circles in residential areas Small urban intersections Low-speed traffic calming areas Road junctions replacing traditional stop-controlled intersections Purpose of the Marking Mini-circle markings improve traffic flow and safety by clearly defining movement direction and priority rules, reducing confusion at small intersections. Common Mistakes to Avoid Driving against the direction of the arrows Failing to yield to traffic from the right Entering the circle too quickly Assuming right of way without checking other vehicles Safety Tips Slow down significantly before entering the circle Always check traffic from your right first Be alert for drivers who do not yield correctly Use smooth, controlled steering through the circle Penalties for Ignoring the Marking Ignoring mini-circle rules may result in: Traffic fines for failure to yield Collisions at intersections Charges for negligent driving Obstruction of safe traffic flow Summary The mini-circle marking in South Africa controls movement and right-of-way at small traffic circles. Drivers must follow the indicated direction, yield correctly, and approach slowly to ensure safe passage through the intersection.

On any public road.

To indicate that a parking is reserved for vehicles carrying disabled persons only.

Do not park in this area if you are not carrying a disabled person.

Overview The Longitudinal Regulatory Markings (South Africa) – Disabled Persons Parking Marking is a road marking used to reserve parking spaces for vehicles carrying disabled persons. What the Marking Means This marking indicates that the parking space is reserved exclusively for vehicles transporting disabled persons or displaying valid disability authorisation. Unauthorised vehicles may not park in these spaces. How It Works in Practice Clearly identifies accessible parking bays on public roads or in parking areas. Provides easier access to buildings and public facilities for disabled persons. Usually located close to entrances for convenience and accessibility. Must remain available at all times for eligible users. Driver Responsibilities Do not park in disabled parking bays unless authorised Ensure your vehicle is carrying a disabled person or valid permit holder Respect the additional space provided for accessibility needs Keep these bays clear at all times unless legally permitted to use them Where You Will See This Marking This marking is commonly found: At shopping centres and malls Near hospitals and clinics At government and public service buildings In public parking areas and on-street parking zones Purpose of the Marking The purpose of disabled persons parking markings is to ensure accessibility and convenience for people with mobility challenges by providing designated parking close to essential services and entrances. Common Mistakes to Avoid Parking in a disabled bay without a permit Using the space for short-term general parking Blocking access routes or adjacent bays Ignoring accessibility signage and symbols Safety Tips Always check for disability symbols before parking Respect accessibility needs of other road users Keep designated spaces clear at all times Park only in bays appropriate for your vehicle and permit status Penalties for Ignoring the Marking Ignoring disabled parking markings may result in: Parking fines or penalties Vehicle towing or clamping Public complaints or enforcement action Denial of access for disabled persons Summary The disabled persons parking marking in South Africa reserves parking spaces for vehicles carrying disabled persons. Unauthorised use is prohibited to ensure accessibility and fairness for those who need it.

On any public road.

To indicate that a specific lane is reserved for a specified vehicle class only.

Do not use this lane if you are not operating a vehicle class as indicated on the marking.

Overview The Longitudinal Regulatory Markings (South Africa) – Exclusive Use Lane Symbol Marking (Pedal Cyclists) identify lanes reserved specifically for bicycles and other pedal-powered vehicles. These markings form part of dedicated cycling infrastructure on public roads. What the Marking Means This marking indicates that the lane is reserved exclusively for pedal cyclists. Only vehicles that fall within the specified class (typically bicycles) may use it. The key purpose is: to provide a safe, dedicated lane for cyclists by separating them from motor vehicle traffic. How It Works in Practice The lane is clearly marked with a bicycle symbol or similar sign on the road surface. Only pedal cyclists may travel in this lane. Motor vehicles are prohibited from entering or driving in the lane. The lane improves safety by reducing interaction with faster traffic. Driver Responsibilities Do not drive or stop in a cycle-only lane Respect the exclusive use of the lane for cyclists Check carefully before turning across a cycle lane Yield to cyclists when crossing the lane at intersections or driveways Where You Will See This Marking Urban roads with dedicated cycling infrastructure City commuter routes Roads near schools, parks, or recreational areas Designated bicycle networks in metropolitan areas Purpose of the Marking Exclusive cycling lanes improve road safety by separating cyclists from motor vehicles, reducing collisions, and encouraging safer, more sustainable transport use. Common Mistakes to Avoid Driving in the cycle lane to bypass traffic congestion Stopping or parking in the dedicated cycling area Failing to check for cyclists when turning Encroaching into the lane during overtaking manoeuvres Safety Tips Always check blind spots for cyclists before turning Maintain a safe distance when passing cycle lanes Respect cyclists’ right of way in their designated lane Be especially cautious in busy urban cycling areas Penalties for Ignoring the Marking Misuse of exclusive cyclist lanes may result in: Traffic fines for illegal lane usage Increased risk of collisions with cyclists Charges for negligent or dangerous driving Obstruction of dedicated cycling infrastructure Summary The exclusive use lane marking for pedal cyclists in South Africa reserves specific lanes for bicycle use only. Motor vehicles must not enter or obstruct these lanes and must yield appropriately when crossing them.

On any public road.

To indicate that a specific lane is reserved for a specified vehicle class only.

Do not use this lane if you are not operating a vehicle class as indicated on the marking.

Overview The Longitudinal Regulatory Markings (South Africa) – Exclusive Use Lane Symbol Marking (Bus) is a road marking used to designate a traffic lane reserved exclusively for buses. What the Marking Means This marking indicates that the lane is reserved for a specific class of vehicle, in this case buses only. Only authorised buses may use this lane as indicated by the symbol on the road marking. How It Works in Practice Clearly identifies a dedicated bus-only lane on public roads. Separates public transport from general traffic. Improves travel time and efficiency for buses. May apply at all times or during specific hours depending on signage. Driver Responsibilities Do not drive in the bus lane unless you are operating a bus Check accompanying signs for time-based restrictions Stay in general traffic lanes if you are not authorised Be aware of buses entering or exiting the dedicated lane Where You Will See This Marking This marking is commonly found: In urban and city centres Along major commuter routes Near bus stops and transport corridors On roads prioritising public transport flow Purpose of the Marking The purpose of the exclusive bus lane marking is to prioritise public transport, reduce congestion, and improve overall traffic flow by giving buses a dedicated and uninterrupted travel lane. Common Mistakes to Avoid Driving in the bus lane without authorisation Ignoring time-based restrictions on signage Using the lane for overtaking or shortcuts Assuming the lane is always open to all vehicles Safety Tips Always read both road markings and signs carefully Plan lane changes early to avoid entering restricted lanes Watch for buses merging into or out of the lane Remain in general traffic lanes if unsure Penalties for Ignoring the Marking Ignoring exclusive bus lane markings may result in: Traffic fines for unauthorised lane use Increased congestion and delays Dangerous interaction with public transport vehicles Legal consequences for repeated violations Summary The exclusive use lane symbol marking (bus) in South Africa reserves specific lanes for buses only. Drivers of other vehicles must not enter these lanes unless permitted by signage, ensuring efficient and safe public transport movement.

On any public road.

To indicate that a specific lane is reserved for a specified vehicle class only.

Do not use this lane if you are not operating a vehicle class as indicated on the marking.

Overview The Longitudinal Regulatory Markings (South Africa) – Exclusive Use Lane Symbol Marking (Tram) designate a road lane reserved specifically for trams or tram-like guided public transport systems where applicable. What the Marking Means This marking indicates that only trams (or the specified rail-based/track-guided public transport vehicles) may use the lane. Other road users are not permitted to enter or drive in this lane. The key purpose is: to provide a dedicated, unobstructed route for tram operations and improve public transport efficiency and safety. How It Works in Practice The lane is marked with a tram symbol or related road surface marking. It is reserved exclusively for tram movement. Motor vehicles, motorcycles, and other traffic are prohibited from using it. The lane ensures uninterrupted public transport flow where tram systems exist. Driver Responsibilities Do not drive or stop in tram-only lanes Keep clear of marked tram routes at all times Check carefully before crossing tram lanes at intersections Yield to trams when they are operating in shared road environments Where You Will See This Marking Urban transport corridors with tram systems Dedicated public transport lanes in city centres Shared road environments with rail-based transport Historic or modern tram operating areas (where applicable) Purpose of the Marking Tram exclusive lanes ensure that public transport systems operate efficiently without interference from general traffic, improving reliability, safety, and travel times. Common Mistakes to Avoid Driving in tram lanes to bypass traffic congestion Stopping or parking in tram-only sections of road Failing to yield when crossing tram paths Ignoring tram-specific road surface markings Safety Tips Always check road markings before entering a lane Look both ways for tram movement when crossing Do not assume tram lanes are inactive even if no tram is visible Respect all dedicated public transport infrastructure Penalties for Ignoring the Marking Unauthorized use of tram exclusive lanes may result in: Traffic fines for illegal lane usage Increased risk of collisions with trams Charges for dangerous or negligent driving Obstruction of public transport operations Summary The tram exclusive use lane marking in South Africa reserves specific lanes for tram or rail-based public transport only. All other vehicles must stay out of these lanes and yield where necessary to ensure safe and efficient transit operations.

On any public road.

To indicate that a specific lane is reserved for a specified vehicle class only.

Do not use this lane if you are not operating a vehicle class as indicated on the marking.

Overview The Longitudinal Regulatory Markings (South Africa) – Exclusive Use Lane Symbol Marking (Disabled Persons) is a road marking used to reserve a traffic lane for vehicles transporting disabled persons or authorised disability-class vehicles. What the Marking Means This marking indicates that the lane is exclusively reserved for vehicles carrying disabled persons or vehicles authorised to use disabled-access transport facilities. Only vehicles matching the specified class may use the lane. How It Works in Practice Designates a dedicated lane for accessible transport use. Improves mobility and travel efficiency for disabled persons. Reduces congestion and enhances accessibility near key facilities. May apply permanently or during specific times depending on signage. Driver Responsibilities Do not drive in the lane unless you are authorised Only vehicles carrying disabled persons or permitted under the symbol may use it Always check accompanying road signs for time-based restrictions Stay in general traffic lanes if you are not permitted Where You Will See This Marking This marking is commonly found: Near hospitals and medical facilities In urban centres with accessibility infrastructure Along priority access routes for public services In areas designed for inclusive transport systems Purpose of the Marking The purpose of the exclusive disabled persons lane marking is to improve accessibility, ensure smoother travel for those with mobility challenges, and provide priority access to essential services and facilities. Common Mistakes to Avoid Using the lane without authorisation or eligibility Ignoring disability access symbols on the road Assuming the lane is open to all traffic Blocking access for eligible users Safety Tips Always check lane symbols before entering Respect accessibility rights of other road users Keep designated lanes clear for eligible vehicles Follow all related signage and time restrictions Penalties for Ignoring the Marking Ignoring exclusive disabled persons lane markings may result in: Traffic fines for unauthorised lane use Obstruction of accessibility services Legal enforcement action in serious cases Increased safety risks for vulnerable road users Summary The exclusive use lane marking for disabled persons in South Africa reserves specific lanes for authorised accessible transport vehicles. Only eligible vehicles may use these lanes to ensure safe, efficient, and fair road access.

On any public road.

To indicate that you are driving on a priority road.

You have the right of way at intersections until such time you see the end of priority sign for this lane.

Overview The Longitudinal Regulatory Markings (South Africa) – Exclusive Use Lane Symbol Marking (All Users) indicate a priority lane where vehicles have preferential right of way over other traffic until the lane’s priority ends. What the Marking Means This marking shows that you are driving in a designated priority lane. Vehicles in this lane generally have right of way at intersections and junctions until an “end of priority” sign is reached. The key purpose is: to give priority movement to traffic in a designated lane for improved flow and reduced delays. How It Works in Practice The lane is marked as a priority route for all designated users. Vehicles in the lane have right of way at intersections. The priority remains valid until an “end of priority” marking or sign is reached. Other traffic must yield to vehicles in this lane where applicable. Driver Responsibilities Stay in the designated lane if you are using the priority route Maintain awareness of intersections where priority applies Do not assume priority continues beyond the end-of-priority sign Yield correctly when entering or crossing the lane from side roads Where You Will See This Marking Major arterial roads Coordinated traffic routes in urban areas Priority transport corridors Roads with traffic flow management systems Purpose of the Marking These markings improve traffic efficiency by giving certain lanes priority movement through intersections, reducing congestion and improving travel time reliability along key routes. Common Mistakes to Avoid Assuming priority applies beyond the marked section Failing to yield when exiting or entering the lane Blocking the priority lane from side roads Misinterpreting the lane as a dedicated vehicle-type lane Safety Tips Watch for “end of priority” signs in advance Slow down at intersections even if you have priority Check for crossing traffic that may not yield correctly Drive defensively in high-traffic priority corridors Penalties for Ignoring the Marking Violating priority lane rules may result in: Traffic fines for failure to yield Intersection collisions due to misjudged right of way Charges for negligent driving Obstruction of designated traffic flow systems Summary The exclusive use lane marking (all users priority lane) in South Africa designates a route where vehicles have right of way through intersections until the end-of-priority sign is reached. Drivers must remain alert and still exercise caution despite having priority.

On any road especially at intersections and pedestrian crossings.

To indicate where you must bring your vehicle to a standstill.

Stop with the front of your vehicle behind the stop sign. If there is no stop sign, the stop line will have the same meaning as a stop sign.

Overview The Transverse Regulatory Markings (South Africa) – Stop Line Marking is a road marking used at intersections and pedestrian crossings to indicate where vehicles must come to a complete stop. What the Marking Means This solid line across the road shows the exact point where a vehicle must stop when required to do so by a stop sign, traffic signal, or road rule. If no stop sign is present, the stop line itself still carries the legal requirement to stop. How It Works in Practice Drivers must stop before their vehicle crosses the line. It is commonly used with stop signs or traffic lights. It ensures clear visibility for intersecting traffic and pedestrians. It defines a consistent stopping point for all vehicles. Driver Responsibilities Bring the vehicle to a complete standstill behind the stop line Ensure the front of the vehicle does not cross the line Check for pedestrians and cross traffic before proceeding Comply even if no stop sign is visible but a stop line is present Where You Will See This Marking This marking is commonly found: At intersections controlled by stop signs or traffic lights At pedestrian crossings At railway crossings or controlled junctions In urban and suburban road networks Purpose of the Marking The purpose of the stop line marking is to clearly indicate the legal stopping position for vehicles, improving safety and ensuring orderly traffic flow at intersections and crossings. Common Mistakes to Avoid Stopping over or past the line Rolling forward without coming to a full stop Confusing the stop line with general lane markings Failing to stop when no stop sign is present but a stop line exists Safety Tips Always stop completely before the line Look both ways before proceeding Yield to pedestrians at crossings Proceed only when it is safe and legal to do so Penalties for Ignoring the Marking Ignoring the stop line marking may result in: Traffic fines for failing to stop Increased risk of intersection collisions Endangering pedestrians and other vehicles Legal liability in the event of an accident Summary The stop line marking in South Africa indicates where vehicles must come to a complete stop at intersections or crossings. Drivers must stop behind the line and proceed only when it is safe to do so.

On any road especially at intersections.

To indicate that you must give priority to all who cross in front of you at this point.

Give way to any one who crosses your path of travel or who wants to cross your path. Even if there is no yield sign, you still have to give way.

Overview The Transverse Regulatory Markings (South Africa) – Yield Line Marking are road surface markings used at intersections and junctions to indicate where drivers must give way to other traffic. What the Marking Means A yield line (usually a broken “give way” line across the road) shows the point where drivers must slow down and be prepared to stop to allow other road users to pass safely. The key purpose is: to indicate that drivers must yield to crossing traffic and give priority to vehicles or pedestrians already in or crossing the intersection. How It Works in Practice The line marks the point where you must yield before entering the intersection. Traffic on the intersecting road may have right of way. Drivers must check both directions before proceeding. It applies even if a physical yield sign is not present. Driver Responsibilities Slow down when approaching the yield line Stop if necessary to allow safe crossing of other traffic Give way to all vehicles and pedestrians in the intersection Proceed only when the road is completely clear Where You Will See This Marking At intersections and junctions At roundabouts or merging points At entries from side roads onto main roads In urban, suburban, and rural road networks Purpose of the Marking Yield line markings help regulate traffic flow by clearly showing where drivers must give way, reducing confusion and preventing collisions at intersections. Common Mistakes to Avoid Driving over the line without checking for traffic Assuming you have right of way automatically Failing to yield to pedestrians or cyclists Entering intersections too quickly Safety Tips Approach the yield line slowly and cautiously Look left, right, and ahead before entering Be prepared to stop completely if needed Only proceed when it is safe and clear Penalties for Ignoring the Marking Ignoring yield line markings may result in: Collisions at intersections Traffic fines for failure to yield Dangerous driving charges in serious cases Liability for causing accidents Summary The yield line marking in South Africa indicates where drivers must give way to crossing traffic. Drivers must slow down, check for other road users, and proceed only when it is safe to do so.

On any road especially in urban areas at intersections and close to schools.

To inform you that priority must be given to pedestrians crossing or wanting to cross the road at these places.

Look out for any pedestrians crossing or wanting to cross the road and give them priority by slowing down or stopping.

Overview The Transverse Regulatory Markings (South Africa) – Pedestrian Crossing Lines Marking is used on roads to indicate designated pedestrian crossing areas, especially at intersections, schools, and busy urban streets. What the Marking Means These painted road markings show where pedestrians have the right of way to cross the road. Drivers must yield to pedestrians who are crossing or intending to cross within the marked area. How It Works in Practice Defines a safe crossing zone for pedestrians. Indicates that pedestrians have priority over vehicles. Commonly used with signage or traffic signals. Requires drivers to slow down or stop when necessary. Driver Responsibilities Slow down when approaching pedestrian crossing lines Be prepared to stop for pedestrians crossing or waiting to cross Never block the crossing area Proceed only when the crossing is completely clear Where You Will See This Marking This marking is commonly found: At intersections in urban areas Near schools and pedestrian-heavy zones At shopping centres and public facilities At signalised or uncontrolled crossings Purpose of the Marking The purpose of pedestrian crossing lines is to clearly define where pedestrians may safely cross and to ensure that vehicles yield, improving road safety in high-foot-traffic areas. Common Mistakes to Avoid Failing to slow down when approaching a crossing Driving through while pedestrians are crossing Stopping on top of the crossing area Ignoring pedestrians waiting to cross Safety Tips Always scan for pedestrians before entering a crossing zone Reduce speed in school and urban areas Stop completely if pedestrians are present Allow sufficient time for pedestrians to cross safely Penalties for Ignoring the Marking Ignoring pedestrian crossing markings may result in: Traffic fines for failing to yield Increased risk of pedestrian collisions Serious injury or fatalities Legal consequences for negligent driving Summary Pedestrian crossing line markings in South Africa indicate areas where pedestrians have priority. Drivers must slow down, yield, and ensure crossings are clear before proceeding.

On any road especially in urban areas at intersections and close to schools.

To inform you that priority must be given to pedestrians crossing or wanting to cross the road at these places.

Look out for any pedestrians crossing or wanting to cross the road and give them priority by slowing down or stopping.

Overview The Transverse Regulatory Markings (South Africa) – Block Pedestrian Crossing Marking are road surface markings used mainly in urban areas, especially at intersections and near schools, to indicate a designated pedestrian crossing area. What the Marking Means These wide block-style markings show where pedestrians have priority to cross the road safely. Drivers must yield to pedestrians within or approaching this marked crossing area. The key purpose is: to give pedestrians priority at designated crossings and require drivers to slow down or stop when pedestrians are present. How It Works in Practice The marking defines a clear pedestrian crossing zone on the roadway. Pedestrians within or stepping onto the crossing have priority. Vehicles must yield, even if there is no physical traffic signal present. These crossings are often placed near high-foot-traffic areas. Driver Responsibilities Slow down when approaching the crossing Be prepared to stop for pedestrians at any time Never overtake vehicles that are stopping for pedestrians Remain alert for children or unexpected crossing movement Where You Will See This Marking Urban intersections and city streets School zones and pedestrian-heavy areas Shopping districts and public transport hubs Residential areas with frequent pedestrian movement Purpose of the Marking Block pedestrian crossing markings improve safety by clearly identifying where pedestrians are expected to cross and ensuring they are given priority over vehicles. Common Mistakes to Avoid Failing to stop for pedestrians already on the crossing Driving through the crossing at normal speed Overtaking stopped vehicles at the crossing Not scanning for pedestrians before entering the area Safety Tips Approach crossings at reduced speed Always check for pedestrians on both sides of the road Be especially cautious near schools and bus stops Stop completely when pedestrians are crossing Penalties for Ignoring the Marking Ignoring pedestrian crossing markings may result in: Fines for failing to yield to pedestrians Serious pedestrian collisions Charges for negligent or reckless driving Legal liability in accidents involving pedestrians Summary The block pedestrian crossing marking in South Africa indicates a designated pedestrian priority zone. Drivers must slow down, remain alert, and give way to pedestrians at all times within the crossing area.

On any road before a railway crossings between the warning sign and the railway crossing.

To warn that there is a railway crossing ahead.

Slow down and if necessary, stop before the crossing.

Overview The Warning Markings (South Africa) – Railway Crossing Marking is a road surface marking used to alert drivers that a railway level crossing is approaching. What the Marking Means This marking serves as an additional warning that a railway crossing is ahead, reinforcing the railway warning sign. It reminds drivers to reduce speed and prepare to stop if a train is approaching. How It Works in Practice Appears on the road surface before railway crossings. Works together with railway warning signs and signals. Gives drivers extra time to react before reaching the tracks. Improves safety at high-risk crossing points. Driver Responsibilities Slow down when approaching the railway crossing area Be prepared to stop if a train is approaching Look both left and right for oncoming trains Never attempt to cross if warning signals are active Where You Will See This Marking This marking is commonly found: On roads approaching railway level crossings Between warning signs and the actual tracks In rural and urban areas near rail lines At both controlled and uncontrolled railway crossings Purpose of the Marking The purpose of the railway crossing warning marking is to increase driver awareness and reduce the risk of collisions between road vehicles and trains by providing early visual warning on the road surface. Common Mistakes to Avoid Ignoring road markings and approaching too fast Attempting to cross when a train is visible or approaching Stopping on the railway tracks Not checking both directions before crossing Safety Tips Always slow down well before the crossing Look and listen carefully for approaching trains Stop if visibility is poor or signals indicate danger Cross only when it is completely safe to do so Penalties for Ignoring the Marking Ignoring railway crossing markings may result in: Traffic fines or prosecution Severe collisions with trains Risk of serious injury or fatalities Legal consequences for reckless driving Summary The railway crossing warning marking in South Africa alerts drivers to an approaching railway level crossing. Drivers must slow down, stay alert, and be prepared to stop to ensure safe crossing conditions.

On any road.

To warn you that there is a break (intersection or off ramp) in the continuing part of the roadway and to inform you that if you are in a lane that has a line on one side, that lane will soon turn off from the road which you are now travelling.

Yield to any traffic that wants to change lanes. The continuity lines will soon change to a channelizing line or painted island, which will make it illegal to change direction. Check your blind spot to make sure there are no other vehicles that might cut in front of you.

Overview The Warning Markings (South Africa) – Continuity Line Marking are road surface markings used to alert drivers to upcoming changes in the roadway layout, such as exits, lane splits, or intersections. What the Marking Means A continuity line indicates that the current lane is either continuing as part of the main route or beginning to diverge toward an off-ramp or separate roadway. It warns drivers that lane behaviour will soon change. The key purpose is: to warn drivers of an upcoming split or exit and guide safe lane selection before lane restrictions apply. How It Works in Practice The line helps distinguish between through lanes and exit or diverging lanes. Drivers are alerted that their lane may split or leave the main carriageway. Lane changes become restricted as markings transition into solid channelisation or painted islands. Safe lane selection must happen before restrictions begin. Driver Responsibilities Pay attention to continuity lines well in advance Choose the correct lane early based on your intended route Yield to vehicles already established in adjacent lanes when changing Check blind spots before merging or changing lanes Where You Will See This Marking Approaches to freeway exits and off-ramps Lane splits on major highways Complex urban interchanges Road sections transitioning into channelised intersections Purpose of the Marking Continuity line markings improve safety and traffic flow by giving drivers early warning of lane divergence, reducing sudden lane changes and confusion near exits or intersections. Common Mistakes to Avoid Waiting too long before choosing the correct lane Forcing a lane change over solid or channelised markings Ignoring vehicles merging from continuity lanes Failing to check blind spots during lane adjustments Safety Tips Read road markings early when approaching exits Do not make sudden lane changes near split points Expect vehicles to merge from adjacent lanes Reduce speed slightly when approaching complex lane layouts Penalties for Ignoring the Marking Misuse of lanes around continuity markings may result in: Traffic fines for unsafe or illegal lane changes Collisions at lane split or merge points Charges for reckless driving Obstruction of traffic flow in channelised areas Summary Continuity line markings in South Africa warn drivers of upcoming lane splits or exits and guide safe lane selection before restrictions apply. Drivers must plan ahead and avoid late or unsafe lane changes.

On any road.

To warn you that there is a break (intersection or off ramp) in the continuing part of the roadway and to inform you that if you are in a lane that has a line on one side, that lane will soon turn off from the road which you are now travelling.

Yield to any traffic that wants to change lanes. The continuity lines will soon change to a channelizing line or painted island, which will make it illegal to change direction. Check your blind spot to make sure there are no other vehicles that might cut in front of you.

Overview The Warning Markings (South Africa) – Continuity Line Marking is a road surface marking used to warn drivers that a lane is about to diverge or exit from the main carriageway. What the Marking Means This marking alerts drivers that the lane they are travelling in will soon separate from the main road, such as at an off-ramp or intersection. It also indicates that lane changes may soon become restricted or prohibited. How It Works in Practice Appears where lanes begin to split or exit the main road. Warns of upcoming off-ramps or diverging routes. Indicates that a lane may soon become a dedicated turning or exit lane. Often transitions into channelizing lines or painted islands. Driver Responsibilities Pay close attention to lane markings and road signs Decide early whether you need to stay on the main road or exit Yield to vehicles already in the correct lane when changing lanes Check blind spots before attempting any lane change Where You Will See This Marking This marking is commonly found: Near freeway off-ramps and exits At major intersections and interchanges Where lanes split into different directions On multi-lane highways approaching junctions Purpose of the Marking The purpose of the continuity line marking is to provide early warning that a lane is about to diverge or end, helping drivers make safe lane decisions and reducing sudden or unsafe lane changes. Common Mistakes to Avoid Waiting too long before changing lanes Forcing entry into another lane at the last moment Ignoring vehicles already positioned in the exit lane Failing to check blind spots before merging Safety Tips Plan your route early before reaching split lanes Slow down and stay alert in merging areas Maintain safe following distance Follow all lane guidance markings carefully Penalties and Risks for Ignoring the Marking Ignoring continuity line markings may result in: Unsafe lane changes and traffic fines Collisions due to sudden merging or cutting in Driving in a lane that leads to a different route unintentionally Increased risk of accidents at exits and interchanges Summary The continuity line marking in South Africa warns drivers that a lane is about to diverge or exit the main roadway. Drivers must plan early, check blind spots, and change lanes safely to avoid conflicts and ensure smooth traffic flow.

On any road.

To warn you that there is a break (intersection or off ramp) in the continuing part of the roadway and to inform you that if you are in a lane that has a line on one side, that lane will soon turn off from the road which you are now travelling.

Yield to any traffic that wants to change lanes. The continuity lines will soon change to a channelizing line or painted island, which will make it illegal to change direction. Check your blind spot to make sure there are no other vehicles that might cut in front of you.

Overview The Warning Markings (South Africa) – Continuity Line Marking are road surface markings that alert drivers to an upcoming change in the roadway, such as a lane split, off-ramp, or intersection. What the Marking Means A continuity line warns that the lane you are currently travelling in may either continue or soon diverge from the main carriageway. It also indicates that lane changes will soon become restricted as the road layout changes. The key purpose is: to warn drivers early of lane divergence or roadway breaks and help them choose the correct lane before restrictions apply. How It Works in Practice The lane may appear to continue or split ahead of an intersection or off-ramp. Drivers in lanes bordered by continuity lines must prepare for a possible exit or divergence. Continuity lines transition into solid channelising lines or painted islands where lane changes are no longer allowed. Other vehicles may merge or diverge in the same area, increasing interaction between lanes. Driver Responsibilities Select your lane early before reaching the continuity section Yield to vehicles that are legally changing or merging lanes Avoid crossing into channelised or restricted areas once formed Check mirrors and blind spots before any lane adjustment Where You Will See This Marking Freeway exits and off-ramps Lane splits on highways Approaches to intersections with complex lane layouts Urban interchanges with merging or diverging traffic Purpose of the Marking Continuity line markings improve road safety by giving drivers early warning of lane changes or splits, helping prevent sudden lane changes and reducing collision risk near exits and junctions. Common Mistakes to Avoid Delaying lane choice until the split point Crossing into restricted channelised areas Failing to yield during merging situations Ignoring blind spot checks when changing lanes Safety Tips Observe lane markings well in advance of junctions Do not make last-minute lane changes Expect merging traffic in continuity zones Drive defensively in areas where lanes diverge Penalties for Ignoring the Marking Failure to follow continuity line rules may result in: Fines for unsafe or illegal lane changes Collisions at merge or split points Charges for reckless or negligent driving Obstruction of properly channelised traffic flow Summary Continuity line markings in South Africa warn drivers of upcoming lane splits or roadway changes. They require early lane selection and careful merging to ensure safe and orderly traffic movement.

On any road with two-way traffic.

To warn that vehicles on the other side of the road marking are moving in the opposite direction.

Be on the look out for approaching vehicles which may move over onto your side of the road.

Overview The Warning Markings (South Africa) – Dividing Line Marking is a road surface marking used on two-way roads to separate traffic travelling in opposite directions. What the Marking Means This marking warns drivers that vehicles on the other side of the line are travelling in the opposite direction. It helps maintain safe separation between opposing traffic flows. How It Works in Practice Divides a road into lanes for opposite directions of travel. Helps prevent head-on collisions. Indicates the boundary between your lane and oncoming traffic. May be solid or broken depending on overtaking rules. Driver Responsibilities Stay within your lane at all times Be alert for vehicles crossing the dividing line Do not overtake where it is unsafe or prohibited Adjust speed according to road and traffic conditions Where You Will See This Marking This marking is commonly found: On rural and urban two-way roads On highways and main roads In areas with moderate to heavy traffic flow On roads with limited physical separation between directions Purpose of the Marking The purpose of the dividing line marking is to separate opposing traffic streams and improve road safety by clearly indicating the boundary between lanes travelling in opposite directions. Common Mistakes to Avoid Crossing into oncoming traffic lanes unnecessarily Unsafe overtaking near blind spots or curves Ignoring oncoming vehicles drifting over the line Driving too close to the centre line Safety Tips Maintain a safe distance from the centre line Be extra cautious on narrow or winding roads Watch for vehicles that may overtake unsafely Reduce speed in low visibility conditions Penalties and Risks for Ignoring the Marking Ignoring dividing line markings may result in: Head-on collisions with oncoming traffic Traffic fines for unsafe or illegal overtaking Loss of vehicle control in narrow lanes Severe injury or fatal accidents Summary The dividing line marking in South Africa separates traffic travelling in opposite directions. Drivers must stay in their lane, avoid unsafe overtaking, and remain alert for oncoming vehicles to ensure road safety.

On any road with two-way traffic.

To warn that vehicles on the other side of the road marking are moving in the opposite direction.

Be on the look out for approaching vehicles which may move over onto your side of the road.

Overview The Warning Markings (South Africa) – Dividing Line Marking are road surface markings used on roads with two-way traffic to separate opposing traffic flows. What the Marking Means A dividing line indicates the centre of the roadway and separates traffic moving in opposite directions. It serves as a visual warning to help drivers stay within their correct lane and remain aware of oncoming traffic. The key purpose is: to separate opposing traffic streams and warn drivers of the presence of oncoming vehicles. How It Works in Practice The line runs along the centre of a two-way road. Each side of the line carries traffic in opposite directions. Drivers must remain on their side of the dividing line unless overtaking is permitted. It helps reduce head-on collision risk by clearly defining lanes. Driver Responsibilities Stay within your lane and do not cross the dividing line unnecessarily Be alert for oncoming vehicles that may drift into your lane Only overtake when it is safe and legally permitted Adjust speed when visibility is poor or roads are narrow Where You Will See This Marking Rural two-way roads Urban streets with no physical median Mountainous or winding roads Highways without central barriers Purpose of the Marking Dividing line markings improve road safety by clearly separating opposing traffic flows and reminding drivers of the risk of oncoming vehicles crossing into their lane. Common Mistakes to Avoid Drifting over the centre line while driving Unsafe overtaking in poor visibility conditions Ignoring oncoming traffic risks on narrow roads Assuming the road is wide enough without checking Safety Tips Keep well to your side of the road at all times Reduce speed on blind bends and narrow sections Be extra cautious during night or wet conditions Watch for vehicles that may cross the centre line unexpectedly Penalties for Ignoring the Marking Ignoring dividing line rules may result in: Traffic fines for improper lane use or overtaking Head-on collisions due to lane crossing Charges for reckless or dangerous driving Increased risk of serious road accidents Summary Dividing line markings in South Africa separate opposing traffic on two-way roads. Drivers must remain on their side of the road, stay alert for oncoming vehicles, and only overtake when it is safe and legal to do so.