On any road.

To indicate an increase in the number of lanes ahead

Ensure that you do not straddle any lane markings

Overview The Guidance Markings (South Africa) – Furcation Arrow Marking are road surface markings used to show that a single lane is splitting into multiple lanes ahead. What the Marking Means A furcation arrow indicates that the road ahead will divide into two or more separate lanes, increasing the number of available lanes for traffic. Drivers must position themselves correctly before the split occurs. The key purpose is: to warn drivers that a lane split is approaching and guide them to choose and stay within a lane without straddling markings. How It Works in Practice The arrow appears on the road surface before a lane division point. The single lane splits into multiple lanes further ahead. Each arrow guides drivers into a specific lane direction or continuation. Lane changes become more restricted as the split approaches. Driver Responsibilities Choose your lane early before reaching the split point Do not straddle lane markings as the road divides Follow the direction indicated by the arrow in your lane Maintain safe spacing from other vehicles during the split Where You Will See This Marking Approaches to freeway interchanges Lane splits on highways Busy urban arterial roads Roads transitioning into multi-lane sections Purpose of the Marking Furcation arrow markings improve safety and traffic flow by clearly indicating upcoming lane increases and helping drivers position themselves correctly before the roadway divides. Common Mistakes to Avoid Straddling lane markings during a lane split Waiting too long to choose a lane Changing lanes at the last moment near the split Ignoring directional guidance from arrows Safety Tips Observe lane arrows early and plan your route Stay fully within your chosen lane Reduce speed slightly when approaching a split Be aware of surrounding vehicles making similar decisions Penalties for Ignoring the Marking Ignoring furcation markings may result in: Traffic fines for improper lane usage Unsafe lane changes at split points Increased risk of collisions Charges for negligent driving behaviour Summary Furcation arrow markings in South Africa warn drivers of an upcoming lane split and guide them into the correct lane. Drivers must choose early and avoid straddling lane markings to ensure safe and orderly traffic flow.

On any road.

To indicate an increase in the number of lanes ahead

Ensure that you do not straddle any lane markings

Overview The Road Markings (South Africa) – Furcation Arrow Marking is a guidance marking used on roadways to direct vehicles into separate lanes and prevent incorrect lane positioning. What the Marking Means This marking uses arrows to show that a single traffic flow is splitting into different lanes or directions ahead. Drivers must choose a lane early and avoid straddling lane markings. How It Works in Practice Appears where one road flow divides into multiple lanes or routes. Indicates that each lane leads to a different direction or purpose. Helps organise vehicles before intersections or junctions. Reduces last-minute lane changes and confusion. Driver Responsibilities Choose your lane early based on destination Do not straddle or drive over lane markings Follow directional arrows painted on the road Check mirrors and blind spots before changing lanes Where You Will See This Marking This marking is commonly found: At major intersections and junctions On highway exits and off-ramps Where lanes split into different directions In urban multi-lane traffic areas Purpose of the Marking The purpose of the furcation arrow marking is to guide drivers into the correct lanes early and prevent unsafe lane straddling or last-minute merging, improving traffic flow and reducing collision risk. Common Mistakes to Avoid Straddling two lanes instead of choosing one Ignoring directional arrows on the road surface Changing lanes too late at splits or junctions Failing to plan lane position early Safety Tips Decide your route before reaching lane splits Follow road arrows carefully and consistently Maintain safe distance from other vehicles when merging Signal early when changing lanes Penalties and Risks for Ignoring the Marking Ignoring furcation arrow markings may result in: Unsafe lane changes and traffic fines Collisions due to sudden merging or drifting Traffic congestion at intersections or exits Increased risk of side-impact accidents Summary The furcation arrow marking in South Africa helps guide drivers into the correct lane as roads split. Drivers must avoid straddling lanes, follow arrows, and choose their lane early to ensure safe and orderly traffic flow.

On any road.

To indicate an increase in the number of lanes ahead

Ensure that you do not straddle any lane markings

Overview The Guidance Markings (South Africa) – Furcation Arrow Marking are road surface markings used to indicate that the roadway ahead will split into additional lanes. What the Marking Means A furcation arrow shows that a single lane will divide into two or more lanes further ahead, increasing the number of available traffic lanes. Drivers must prepare to position themselves correctly before the split. The key purpose is: to warn drivers of an upcoming lane increase and guide them to stay fully within their chosen lane without straddling markings. How It Works in Practice The arrow appears on the road before the lane division point. The road splits into multiple lanes ahead. Each arrow indicates the direction or continuation of a specific lane. Drivers must commit to a lane before the split becomes physically separated. Driver Responsibilities Choose your lane early before reaching the split Stay fully within lane markings at all times Avoid straddling or crossing lane lines during the split Follow the direction indicated by the arrow in your lane Where You Will See This Marking Highway and freeway interchanges Urban arterial road expansions Approaches to major intersections Roads transitioning from single to multiple lanes Purpose of the Marking Furcation arrow markings improve road safety by clearly indicating where lanes will split, helping drivers make early decisions and preventing last-minute lane changes that can cause collisions. Common Mistakes to Avoid Straddling lane lines near the split point Changing lanes too late as the road divides Ignoring directional arrows on the roadway Assuming lanes can still be freely changed after the split begins Safety Tips Watch for furcation arrows well in advance Plan your route and choose a lane early Maintain steady speed and control approaching the split Keep your vehicle fully within lane boundaries Penalties for Ignoring the Marking Ignoring furcation markings may result in: Fines for unsafe lane use Increased risk of side-swipe or merging collisions Charges for reckless or negligent driving Traffic disruption at lane split points Summary Furcation arrow markings in South Africa indicate that a lane will split into additional lanes ahead. Drivers must choose their lane early and stay fully within lane markings to ensure safe and orderly traffic flow.

On any road especially one way streets or wide intersections with a complex layout.

To indicate the direction you may drive in a lane or on a road.

The driver must be guided by the arrows and never, unless otherwise requested by a traffic officer, drive in the direction opposite to what the arrows show.

Overview The Guidance Markings (South Africa) – Information Arrow Marking is a road surface marking used to show the permitted direction of travel within a lane or roadway. What the Marking Means This marking indicates the direction in which vehicles must travel in a specific lane. Drivers must follow the arrows and may not drive against the indicated direction unless instructed by a traffic officer. How It Works in Practice Painted arrows show the correct direction of travel in a lane. Commonly used on one-way streets and complex intersections. Helps prevent wrong-way driving and confusion. Works together with road signs and lane markings. Driver Responsibilities Follow all directional arrows on the road surface Do not drive against the indicated direction Choose the correct lane before entering intersections Only follow contrary instructions if directed by a traffic officer Where You Will See This Marking This marking is commonly found: On one-way streets in urban areas At large or complex intersections On multi-lane junctions and roundabouts In city centres with structured traffic flow systems Purpose of the Marking The purpose of information arrow markings is to clearly guide drivers in the correct direction of travel, reduce confusion at complex intersections, and prevent dangerous wrong-way driving. Common Mistakes to Avoid Driving against the direction of arrows Entering one-way streets from the wrong end Ignoring lane-specific direction instructions Failing to observe arrows at intersections Safety Tips Check road arrows before entering a lane or intersection Slow down when approaching complex junctions Stay alert for one-way traffic systems Follow signage and markings together for guidance Penalties and Risks for Ignoring the Marking Ignoring information arrow markings may result in: Traffic fines for wrong-way driving Head-on collisions in one-way systems Severe accidents at intersections Disruption of traffic flow and safety hazards Summary The information arrow marking in South Africa directs drivers on the correct direction of travel. Drivers must follow the arrows at all times to ensure safe and orderly movement, especially on one-way streets and complex intersections.

On any road especially one way streets or wide intersections with a complex layout.

To indicate the direction you may drive in a lane or on a road.

The driver must be guided by the arrows and never, unless otherwise requested by a traffic officer, drive in the direction opposite to what the arrows show.

Overview The Guidance Markings (South Africa) – Information Arrow Marking are road surface markings used to show drivers the permitted direction of travel in a specific lane or roadway section. What the Marking Means An information arrow indicates the direction(s) that vehicles are allowed to travel within a lane. It provides clear guidance to ensure orderly movement, especially in complex or one-way road layouts. The key purpose is: to direct drivers into the correct permitted travel direction and prevent wrong-way driving. How It Works in Practice Arrows are painted on the road surface within lanes or at intersections. Each arrow shows the only allowed direction(s) for that lane (e.g., straight, left, right, or combinations). Drivers must follow the arrow direction strictly. Driving against the indicated direction is prohibited unless instructed by a traffic officer. Driver Responsibilities Follow all directional arrows in your lane Choose the correct lane early based on your intended direction Do not enter or travel against one-way arrow markings Obey traffic officer instructions if they override markings Where You Will See This Marking One-way streets Complex urban intersections Multi-lane junction approaches Large roundabout entries and exits Purpose of the Marking Information arrow markings improve traffic safety and flow by clearly guiding drivers through complex road layouts and preventing wrong-way movements that could lead to serious collisions. Common Mistakes to Avoid Driving in the opposite direction of the arrow Entering the wrong lane before an intersection Ignoring lane-specific directional guidance Making late lane changes across marked arrows Safety Tips Check road arrows well in advance of intersections Position your vehicle in the correct lane early Reduce speed in complex junction areas Stay alert for other drivers who may change lanes suddenly Penalties for Ignoring the Marking Ignoring information arrow markings may result in: Traffic fines for wrong-way driving High risk of head-on or side-impact collisions Charges for reckless or negligent driving Severe disruption of traffic flow in intersections Summary Information arrow markings in South Africa indicate the permitted direction of travel in a lane. Drivers must always follow these arrows unless directed otherwise by a traffic officer, ensuring safe and orderly movement through complex road layouts.

On any road especially in urban areas.

To indicate a section of the road to be used by cyclists to cross the road.

Look out for cyclists crossing or who want to cross the road.

Overview The Guidance Markings (South Africa) – Bicycle Crossing Guidelines Marking is a road surface marking used to indicate a designated area where cyclists may cross a roadway safely. What the Marking Means This marking shows a section of road reserved or intended for cyclists to cross. Drivers must be aware that cyclists may be present and must give them priority where required. How It Works in Practice Indicates a designated bicycle crossing area on the roadway. Helps guide cyclists across traffic safely and predictably. Alerts motorists to expect cyclists crossing the road. Often placed near intersections or dedicated cycle routes. Driver Responsibilities Slow down when approaching bicycle crossing areas Look out for cyclists waiting to cross or already crossing Give cyclists right of way where required Be prepared to stop if necessary for safety Where You Will See This Marking This marking is commonly found: In urban areas with cycling infrastructure Near intersections and pedestrian zones Along designated bicycle routes Close to schools, parks, and public facilities Purpose of the Marking The purpose of bicycle crossing guidelines marking is to improve cyclist safety by clearly identifying where cyclists may cross roads and alerting drivers to their presence. Common Mistakes to Avoid Failing to slow down near bicycle crossings Not yielding to cyclists crossing the road Blocking the bicycle crossing area Ignoring cyclists approaching the crossing point Safety Tips Always scan for cyclists at crossing points Reduce speed in areas with cycling activity Allow cyclists enough space and time to cross safely Be patient and avoid aggressive driving near crossings Penalties and Risks for Ignoring the Marking Ignoring bicycle crossing markings may result in: Traffic fines for failing to yield Collisions with cyclists Serious injury or fatal accidents Legal liability for unsafe driving behaviour Summary The bicycle crossing guidelines marking in South Africa identifies areas where cyclists may cross the road. Drivers must slow down, stay alert, and give priority to cyclists to ensure safe passage.

On any road. At a cycle lane, a road that leads to an airport and where a parking bay is reserved for the handicapped only.

As additional markings with standard signs and markings to inform you that an area is reserved for a specific group or that a road is leading to a specific destination.

Do not use a road or a marked portion of a road if you are not part of the group identified by the marking.

Overview The Road Markings (South Africa) – Symbol Road Marking are pavement markings used to communicate specific road uses, restrictions, or destinations through symbols rather than words. What the Marking Means These markings use clear symbols painted on the road surface to show that a lane, section of road, or parking space is reserved for a specific purpose or user group. They often work together with road signs for clarity. The key purpose is: to identify restricted or designated road space for specific users or destinations using standardised symbols. Common Uses of Symbol Road Markings Cycle lanes: indicate areas reserved for cyclists only Airport routes: guide drivers toward airport access roads Disabled parking bays: mark spaces reserved for people with disabilities Special-use lanes: indicate reserved or restricted traffic areas Driver Responsibilities Do not enter or use marked areas unless you qualify Observe all symbol markings together with road signs Respect reserved parking and dedicated lanes Be alert for pedestrians and cyclists in designated zones Where You Will See This Marking Urban cycle routes and bike lanes Parking areas in shopping centres and public facilities Roads leading to airports or transport hubs Designated accessibility parking zones Purpose of the Marking Symbol road markings improve clarity and safety by quickly communicating road use restrictions and special-purpose areas without relying only on signs. Common Mistakes to Avoid Driving in cycle lanes without permission Parking in reserved or disabled bays without authorization Ignoring destination guidance symbols Assuming markings are optional or decorative Safety Tips Always look for both symbols and accompanying road signs Be cautious in shared or high-activity zones like cycle lanes Plan your route when following destination markings Respect accessibility and priority spaces Penalties for Ignoring the Marking Misusing symbol-marked road areas may result in: Traffic fines for illegal lane or parking use Towing of unauthorized parked vehicles Obstruction of emergency or accessibility access Safety risks to cyclists and pedestrians Summary Symbol road markings in South Africa identify special-purpose road areas such as cycle lanes, airport routes, and disabled parking bays. Drivers must only use these areas if permitted, ensuring safety and proper road use for all users.

On any road. At a cycle lane, a road that leads to an airport and where a parking bay is reserved for the handicapped only.

As additional markings with standard signs and markings to inform you that an area is reserved for a specific group or that a road is leading to a specific destination.

Do not use a road or a marked portion of a road if you are not part of the group identified by the marking.

Overview The Guidance Markings (South Africa) – Symbol Road Marking is a road surface marking that uses symbols to communicate special road use, restrictions, or destinations. What the Marking Means This marking uses pictorial symbols on the road to indicate that a specific lane, section, or facility is reserved for a particular group of road users or serves a specific purpose or destination. How It Works in Practice Uses symbols (such as bicycles, airplanes, or wheelchair icons) painted on the road surface. Indicates dedicated use areas like cycle lanes or accessible parking. May also guide drivers toward specific destinations such as airports. Works together with road signs for clearer guidance. Driver Responsibilities Do not use the marked area unless you are authorised or part of the indicated group Follow the meaning of the symbol exactly as displayed Check accompanying signs for additional restrictions or guidance Respect reserved lanes and facilities at all times Where You Will See This Marking This marking is commonly found: In cycle lanes and bicycle routes Near airports and transport hubs In designated disabled parking areas On roads leading to specific facilities or destinations Purpose of the Marking The purpose of symbol road markings is to clearly communicate special road usage, reserved areas, or directional guidance using simple visual symbols that improve understanding and road safety. Common Mistakes to Avoid Using a reserved lane or area without authorisation Ignoring or misunderstanding road symbols Overlooking accompanying road signs Assuming general road rules apply to all marked areas Safety Tips Always observe and interpret road symbols carefully Check for related signage before entering marked areas Respect dedicated lanes and parking zones Stay alert in areas with multiple road markings Penalties and Risks for Ignoring the Marking Ignoring symbol road markings may result in: Traffic fines for unauthorised road use Obstruction of specialised road users (cyclists or disabled persons) Confusion at complex transport hubs like airports Increased risk of collisions or traffic violations Summary Symbol road markings in South Africa use visual icons to indicate reserved lanes, destinations, or restricted areas. Drivers must follow these symbols carefully and only use marked areas if they are authorised or intended users.

On any road. At a cycle lane, a road that leads to an airport and where a parking bay is reserved for the handicapped only.

As additional markings with standard signs and markings to inform you that an area is reserved for a specific group or that a road is leading to a specific destination.

Do not use a road or a marked portion of a road if you are not part of the group identified by the marking.

Overview The Guidance Markings (South Africa) – Symbol Road Marking are pavement markings that use symbols to guide road users and indicate special-purpose lanes, routes, or parking areas. What the Marking Means These markings communicate restrictions or guidance through clear road symbols painted on the surface. They identify areas reserved for specific users or indicate that a road leads to a particular destination. The key purpose is: to inform drivers of reserved or designated road space and ensure only authorised users enter or use these marked areas. How It Works in Practice Symbols are painted directly on the road surface. They are often supported by road signs for clarity. Each symbol indicates a specific use, restriction, or destination. Drivers must comply with the meaning of the symbol at all times. Common Uses of Symbol Road Markings Cycle lanes: reserved for cyclists only Airport routes: guide traffic toward airport access roads Disabled parking bays: reserved for people with disabilities Special-use lanes: designated for specific traffic groups or services Driver Responsibilities Do not enter or use marked areas unless you are permitted Observe both symbols and accompanying road signs Respect reserved lanes and parking spaces Be alert to vulnerable road users such as cyclists and pedestrians Where You Will See This Marking Urban cycle lanes and shared road spaces Parking areas in public facilities and shopping centres Roads leading to airports or transport hubs Accessibility or priority parking zones Purpose of the Marking Symbol road markings improve road organisation and safety by clearly identifying reserved or specialised road areas, helping prevent misuse and ensuring efficient traffic flow. Common Mistakes to Avoid Driving in cycle lanes without permission Parking in disabled bays without authorisation Ignoring destination or route guidance symbols Assuming markings are optional or advisory only Safety Tips Always check for both road symbols and traffic signs Be extra cautious in areas shared with cyclists or pedestrians Follow guidance markings when approaching transport hubs Respect all reserved-use road spaces Penalties for Ignoring the Marking Misusing symbol-marked areas may result in: Traffic fines for illegal lane or parking use Vehicle towing from restricted parking bays Obstruction of designated traffic or accessibility routes Increased risk of collisions with vulnerable road users Summary Symbol road markings in South Africa guide drivers by identifying reserved lanes, special-use areas, and destination routes. Only authorised users may enter these spaces, ensuring safe and organised road use for all.

On any road. At a cycle lane, a road that leads to an airport and where a parking bay is reserved for the handicapped only.

As additional markings with standard signs and markings to inform you that an area is reserved for a specific group or that a road is leading to a specific destination.

Do not use a road or a marked portion of a road if you are not part of the group identified by the marking.

Overview The Guidance Markings (South Africa) – Symbol Road Marking is a road surface marking that uses pictorial symbols to indicate special-use lanes, reserved areas, or specific destinations on the roadway. What the Marking Means This marking communicates, through symbols painted on the road, that a section of road or lane is reserved for a specific group of road users or leads to a specific destination. It is used together with standard road signs for clearer instruction. How It Works in Practice Uses symbols such as bicycles, airplanes, or wheelchair icons on the road surface. Indicates reserved lanes like cycle lanes or disabled parking bays. May also guide drivers toward specific destinations (e.g., airports). Reinforces or supplements road signs and other markings. Driver Responsibilities Do not enter or use marked areas unless you are part of the indicated group Follow the meaning of the symbol exactly as displayed Observe additional road signs for restrictions or directions Respect all reserved lanes and facilities Where You Will See This Marking This marking is commonly found: In cycle lanes and bicycle-friendly routes In disabled persons’ parking bays On roads leading to airports or transport hubs In areas with specialised traffic management systems Purpose of the Marking The purpose of symbol road markings is to clearly identify restricted-use areas and provide directional guidance using simple visual symbols that enhance road safety and traffic clarity. Common Mistakes to Avoid Driving or parking in reserved areas without permission Ignoring or misinterpreting road symbols Overlooking accompanying signage Assuming general road rules apply to all marked areas Safety Tips Always identify and understand road symbols before entering a lane Check for supporting road signs for confirmation Respect exclusive-use areas for vulnerable or specialised users Stay alert in complex or high-traffic zones Penalties and Risks for Ignoring the Marking Ignoring symbol road markings may result in: Traffic fines for unauthorised use of reserved lanes or bays Obstruction of cyclists, disabled persons, or authorised users Confusion in transport hubs such as airports Increased risk of accidents or traffic violations Summary Symbol road markings in South Africa use pictorial icons to indicate reserved lanes, restricted areas, or destinations. Drivers must obey these markings and only use the indicated areas if they are authorised or intended users.

On any road.

To supply you with additional information.

Read the message on the road and then concentrate on the possible danger indicated by the message.

Overview The Guidance Markings (South Africa) – Word Marking are road surface markings that use written words to provide drivers with additional information or warnings about road conditions, directions, or hazards. What the Marking Means Word markings communicate important instructions or warnings directly on the road surface. They are used to reinforce road signs or give clear, immediate guidance to drivers. The key purpose is: to provide clear written instructions or warnings on the road surface to help drivers recognise and respond to conditions ahead. How It Works in Practice Words are painted directly on the road surface. They may indicate warnings, directions, or lane instructions. They support and reinforce nearby road signs. Drivers must read and respond to the message immediately. Common Examples of Word Markings “STOP” – indicates a mandatory stop ahead or at the line “SLOW” – warns of reduced speed conditions ahead “BUS” – reserved lane for buses only “TAXI” – indicates a lane or area reserved for minibus taxis Driver Responsibilities Read and obey all word markings on the road Adjust speed or position according to the instruction Pay attention to accompanying road signs React early to avoid hazards or violations Where You Will See This Marking Urban intersections High-traffic commuter roads Approaches to hazards or controlled areas Dedicated bus, taxi, or special-use lanes Purpose of the Marking Word markings improve road safety by giving drivers clear, direct instructions on the road surface, helping them respond quickly to hazards, lane rules, or traffic controls. Common Mistakes to Avoid Ignoring road surface instructions while focusing only on signs Misreading markings due to inattention or speed Entering restricted lanes marked with words like “BUS” or “TAXI” Failing to slow down when “SLOW” is marked Safety Tips Scan the road surface regularly, not just signs above Reduce speed when approaching unfamiliar markings Follow word instructions immediately and consistently Be extra cautious in busy urban traffic areas Penalties for Ignoring the Marking Ignoring word markings may result in: Traffic fines for illegal lane use or failure to comply Obstruction of public transport lanes Increased risk of collisions in controlled areas Charges for negligent or reckless driving Summary Word markings in South Africa provide clear written instructions directly on the road surface. Drivers must read and obey these markings immediately to ensure safe, orderly, and lawful driving.

On any road.

To supply you with additional information.

Read the message on the road and then concentrate on the possible danger indicated by the message.

Overview The Guidance Markings (South Africa) – Word Marking is a road surface marking that uses written words painted on the road to provide additional information or warnings to drivers. What the Marking Means This marking communicates important instructions, warnings, or guidance directly on the road surface using words. Drivers must read and respond appropriately to the message while continuing to watch for hazards. How It Works in Practice Words are painted on the road surface (e.g., “STOP”, “SLOW”, “SCHOOL”). Provides clear, direct instructions or warnings. Often reinforces road signs or upcoming hazards. Helps drivers react quickly to changing road conditions. Driver Responsibilities Read and obey all word markings on the road Adjust speed or driving behaviour according to the message Stay alert for the hazard or condition indicated Do not ignore or overlook written road instructions Where You Will See This Marking This marking is commonly found: Near schools and pedestrian zones Approaching intersections or stop areas In construction or roadwork zones On roads with specific safety warnings or instructions Purpose of the Marking The purpose of word markings is to provide clear, direct, and easily understandable instructions or warnings to drivers, improving awareness and road safety. Common Mistakes to Avoid Not noticing or reading the road message in time Ignoring instructions such as “SLOW” or “STOP” Focusing only on other vehicles instead of road markings Failing to anticipate the hazard indicated by the message Safety Tips Scan the road surface ahead while driving Slow down when approaching word markings Prepare for possible hazards indicated by the message Always combine road markings with sign awareness Penalties and Risks for Ignoring the Marking Ignoring word markings may result in: Traffic fines for non-compliance with road instructions Increased risk of collisions or accidents Failure to respond to safety-critical warnings Endangering pedestrians and other road users Summary Word markings in South Africa provide clear written instructions or warnings directly on the road surface. Drivers must read, understand, and respond appropriately while staying alert to potential hazards.

On any road.

To indicated a kerbing on or in the roadway

Slow down and be on the lookout for a kerbing.

Overview The Guidance Markings (South Africa) – Kerbing Marking are road surface markings used to indicate the presence of a kerb or raised edge within or alongside the roadway. What the Marking Means A kerbing marking warns drivers that there is a physical raised edge, divider, or kerb ahead that may affect vehicle movement. It helps drivers avoid striking or mounting the kerb unexpectedly. The key purpose is: to alert drivers to the presence of a kerb or raised structure so they can slow down and maintain safe vehicle control. How It Works in Practice The marking highlights kerbs within or alongside the roadway. It may appear in areas with channelised traffic or road edge separation. Drivers are guided to adjust position and speed accordingly. It reduces the risk of collision with raised road edges. Driver Responsibilities Slow down when approaching kerbing markings Stay alert for raised edges or dividers in the road Avoid driving too close to kerbs Maintain full control of steering in narrow or channelised areas Where You Will See This Marking Urban intersections with channelised lanes Traffic islands and road dividers Entry and exit points of roundabouts Roads with raised median separators or safety islands Purpose of the Marking Kerbing markings improve road safety by warning drivers of physical road edges or raised structures, helping prevent vehicle damage and loss of control in confined or channelised areas. Common Mistakes to Avoid Driving too fast near kerbed areas Striking or mounting raised edges Misjudging lane width in channelised sections Ignoring kerbing in low-light conditions Safety Tips Reduce speed when approaching kerbing zones Keep your vehicle centred in the lane Be extra cautious at night or in poor visibility Watch for sudden lane narrowing or dividers Penalties / Consequences of Ignoring the Marking Ignoring kerbing warnings may result in: Vehicle damage (tyres, rims, suspension) Loss of control in narrow lanes Traffic fines for careless driving Increased risk of collisions in channelised areas Summary Kerbing markings in South Africa warn drivers of raised edges or channelised road sections. Drivers must slow down, stay alert, and maintain proper lane position to avoid collisions or vehicle damage.

On any road that carries two-way traffic (traffic from opposite directions).

To inform that it is prohibited to drive with any part of your vehicle on the righthand side of this line.

Do not cross the line, except to gain direct access to an entrance on the other side of the line, to gain direct access from such an entrance to the road or to pass a stationary obstruction. In all these cases you must ensure that it is safe to do so.

Overview The Longitudinal Regulatory Markings (South Africa) – No Overtaking Marking is a road marking used on two-way roads to control overtaking and improve safety where visibility or conditions make passing risky. What the Marking Means This marking indicates that drivers are not allowed to drive with any part of their vehicle to the right of the solid line. It effectively prohibits overtaking in unsafe sections of the road. How It Works in Practice Appears as a solid line along the centre or lane edge of the road. Prevents overtaking in areas with limited visibility or hazards. Applies to two-way traffic roads only. Helps reduce head-on collision risk. Exceptions Drivers may cross the line only in specific situations, provided it is safe to do so: To turn into a driveway or entrance on the opposite side To exit a driveway onto the road To pass a stationary obstruction in the roadway Driver Responsibilities Do not overtake where the marking is present Stay within your lane at all times Only cross the line when it is safe and legally permitted Watch for oncoming traffic on two-way roads Where You Will See This Marking This marking is commonly found: On rural two-way roads In areas with poor visibility such as bends or hills Near intersections or hazardous sections of road Where overtaking would be dangerous Purpose of the Marking The purpose of the no overtaking marking is to improve road safety by preventing dangerous passing manoeuvres in high-risk areas and ensuring vehicles remain in their correct lanes. Common Mistakes to Avoid Overtaking over a solid no-overtaking line Crossing the line unnecessarily Attempting to pass slow traffic in unsafe zones Ignoring visibility conditions before overtaking Safety Tips Wait for a legal and safe overtaking zone Maintain a safe following distance Be patient on narrow or winding roads Only cross the line when absolutely necessary and safe Penalties for Ignoring the Marking Ignoring no overtaking markings may result in: Traffic fines for illegal overtaking Increased risk of head-on collisions Serious accidents or fatalities Legal consequences for reckless driving Summary The no overtaking marking in South Africa prohibits crossing into oncoming traffic lanes in unsafe areas. Drivers must stay in their lane and only cross the line when it is legally allowed and safe to do so.

On any road with two-way traffic.

To inform you that you may not cross this line.

You may under no circumstances drive on the right hand side or cross these lines with any part of your vehicle, except to drive around a stationary vehicle or stationary obstruction in the road.

Overview The Longitudinal Regulatory Markings (South Africa) – No Crossing Marking are continuous road markings used on two-way roads to separate opposing traffic flows and control unsafe overtaking or lane crossing. What the Marking Means This marking consists of a continuous solid line (or lines) on the road that must not be crossed by drivers. It indicates that crossing into the opposite lane is prohibited. The key purpose is: to prevent vehicles from crossing into oncoming traffic lanes except in very limited emergency situations. How It Works in Practice Vehicles must remain on their side of the solid line. No overtaking or lane crossing is allowed where the line is continuous. The marking separates opposing traffic on two-way roads. It improves safety on roads with limited visibility or high risk. Driver Responsibilities Stay on your designated lane at all times Do not overtake across the solid line Only cross if it is unavoidable due to a stationary obstruction or vehicle Stay alert for changes in road markings ahead Where You Will See This Marking Two-way rural and urban roads Curves with limited visibility Bridges and narrow road sections High-risk accident zones Purpose of the Marking No crossing markings are used to reduce head-on collisions and improve lane discipline by clearly separating opposing traffic flows and restricting unsafe overtaking. Common Mistakes to Avoid Crossing the solid line to overtake Drifting over into oncoming traffic lanes Ignoring visibility risks on curves or hills Assuming brief crossings are always safe Safety Tips Plan overtaking only where it is legally allowed Maintain a safe following distance instead of overtaking Reduce speed on narrow or blind sections of road Stay fully within your lane at all times Penalties for Ignoring the Marking Crossing a no-crossing line may result in: Traffic fines for illegal overtaking or lane violations Severe head-on collision risk Charges for reckless or dangerous driving Liability for serious road accidents Summary The no crossing longitudinal marking in South Africa separates traffic directions and prohibits crossing the line. Drivers must stay in their lane at all times unless an unavoidable obstruction requires temporary deviation.

On carriageways and at intersections where traffic moves in the same direction.

To prohibit you from crossing the line.

Drive in such a way that no part of your vehicle crosses the line.

Overview The Longitudinal Regulatory Markings (South Africa) – Channelizing Line Marking is a road marking used on carriageways and at intersections to guide and separate traffic moving in the same direction. What the Marking Means This marking indicates that drivers are prohibited from crossing the line. It is used to channel vehicles into specific lanes or paths and to maintain orderly traffic movement. How It Works in Practice Separates traffic lanes travelling in the same direction. Controls vehicle positioning at intersections and merges. Prevents unsafe lane crossing or weaving. Guides drivers through complex traffic layouts. Driver Responsibilities Remain within your designated lane Do not drive over or across the channelizing line Follow directional arrows and lane guidance markings Plan lane changes before reaching the marked area Where You Will See This Marking This marking is commonly found: At intersections and junctions On multi-lane roads and highways Near merging or diverging traffic lanes In areas requiring controlled traffic flow Purpose of the Marking The purpose of the channelizing line marking is to organize traffic movement, reduce lane conflicts, and improve safety by keeping vehicles within designated travel paths. Common Mistakes to Avoid Crossing the line to change lanes suddenly Ignoring lane guidance near intersections Driving partially over the marking Weaving between lanes in restricted areas Safety Tips Select the correct lane early Follow all road markings carefully Avoid sudden lane changes in channelized areas Maintain safe spacing from surrounding vehicles Penalties for Ignoring the Marking Ignoring channelizing line markings may result in: Traffic fines for improper lane usage Increased risk of side-swipe collisions Traffic congestion and unsafe manoeuvres Legal consequences for reckless driving behaviour Summary The channelizing line marking in South Africa separates and guides traffic moving in the same direction. Drivers must remain within their lanes and avoid crossing the marking to ensure safe and orderly traffic flow.

On the left and right-hand edge of the road.

To indicate where the left or right-edge of the road is.

Avoid driving to the left of the left-edge line. You may, however drive here only: whilst being overtaken by another vehicle, if you can so without endangering yourself, other traffic, pedestrians or property, during daytime and if persons and vehicles on the road are clearly discernible at a distance of at least 150 metres. It is not compulsory to drive to the left of the line when you are being overtaken, keep in mind that you have very little space when doing so. If your vehicle breaks down, stop as far left from the line as possible and switch on your emergency lights. The right-edge line is usually found on one-way roads such as dual carriageways or freeways and may not be crossed.

Overview The Longitudinal Regulatory Markings (South Africa) – Left Edge Line Marking are continuous lines painted along the edges of the roadway to indicate the boundary of the carriageway and improve lane guidance and road safety. What the Marking Means The left-edge line marks the left boundary of the road, while the right-edge line marks the right boundary on certain roads such as one-way roads, dual carriageways, or freeways. The key purpose is: to show the edges of the roadway and guide drivers in maintaining proper road position. How It Works in Practice The left-edge line separates the roadway from the shoulder or verge. Drivers should normally remain to the right of the left-edge line. The right-edge line on one-way roads or freeways may not be crossed. Edge lines improve visibility and lane discipline, especially at night or in poor weather. Driver Responsibilities Remain within the marked roadway boundaries Avoid driving to the left of the left-edge line unless legally permitted Only move left of the line when being overtaken and when it is completely safe If stopping due to a breakdown, pull as far left as possible and switch on emergency lights When You May Drive Left of the Left-Edge Line You may move to the left of the left-edge line only under limited conditions: While being overtaken by another vehicle Only during daylight hours When visibility is at least 150 metres When it can be done safely without endangering people, vehicles, or property It is important to note that moving left of the line is not compulsory when being overtaken. Where You Will See This Marking On rural and urban roads Along highways and freeways On dual carriageways and one-way roads On roads with paved shoulders Purpose of the Marking Edge line markings improve road safety by helping drivers judge roadway boundaries, maintain lane position, and avoid leaving the carriageway unintentionally. Common Mistakes to Avoid Driving continuously on the shoulder beyond the edge line Crossing the right-edge line on freeways or one-way roads Moving left when visibility is poor Stopping too close to the traffic lane after a breakdown Safety Tips Use edge lines as guidance in poor visibility Only move left of the line when absolutely safe Keep sufficient space from the road edge Activate hazard lights if forced to stop on the roadside Penalties for Ignoring the Marking Ignoring edge line rules may result in: Traffic fines for unsafe lane usage Collisions with roadside obstacles or vehicles Loss of vehicle control on road shoulders Liability for accidents caused by improper road positioning Summary The left-edge line marking in South Africa indicates the boundary of the roadway. Drivers should remain within the lane markings, use the shoulder only under limited safe conditions, and never cross right-edge lines on one-way roads or freeways.

On the left and right-hand edge of the road.

To indicate where the left or right-edge of the road is.

Avoid driving to the left of the left-edge line. You may, however drive here only: whilst being overtaken by another vehicle, if you can so without endangering yourself, other traffic, pedestrians or property, during daytime and if persons and vehicles on the road are clearly discernible at a distance of at least 150 metres. It is not compulsory to drive to the left of the line when you are being overtaken, keep in mind that you have very little space when doing so. If your vehicle breaks down, stop as far left from the line as possible and switch on your emergency lights. The right-edge line is usually found on one-way roads such as dual carriageways or freeways and may not be crossed.

Overview The Longitudinal Regulatory Markings (South Africa) – Right Edge Line Marking is a road marking used to indicate the outer edge of the roadway. It helps drivers identify the safe limits of the carriageway on both the left and right-hand sides. What the Marking Means The edge line marks the boundary of the usable road surface. The left-edge line may be crossed only in limited situations, while the right-edge line on one-way roads or freeways may not be crossed. How It Works in Practice The left-edge line separates the roadway from the shoulder. The right-edge line is commonly used on freeways and one-way roads. It helps drivers maintain proper lane positioning. It improves visibility and road guidance, especially at night. When You May Drive to the Left of the Left-Edge Line You may drive to the left of the left-edge line only when: You are being overtaken by another vehicle It can be done safely without endangering others It is during daytime Persons and vehicles are clearly visible for at least 150 metres Important Rules It is not compulsory to move left over the line when being overtaken Very little space may be available beyond the line If your vehicle breaks down, stop as far left of the line as possible Switch on emergency lights when stopped on the roadside The right-edge line on freeways or one-way roads may not be crossed Driver Responsibilities Keep your vehicle within the marked roadway boundaries Avoid unnecessary driving beyond the edge line Use caution when allowing another vehicle to overtake Remain alert for pedestrians, cyclists, or roadside hazards Where You Will See This Marking This marking is commonly found: On rural and urban roads On freeways and dual carriageways Along narrow roads with shoulders On one-way traffic routes Purpose of the Marking The purpose of the edge line marking is to define the limits of the roadway, guide drivers safely, improve lane discipline, and reduce the risk of vehicles leaving the road surface. Common Mistakes to Avoid Driving unnecessarily beyond the left-edge line Crossing the right-edge line on freeways Stopping too close to the roadway during breakdowns Failing to check for hazards before moving left Safety Tips Stay within the roadway markings whenever possible Use the shoulder only when legally and safely permitted Reduce speed if visibility or road width is limited Switch on hazard lights if stopped near the edge of the road Penalties for Ignoring the Marking Ignoring edge line markings may result in: Traffic fines for improper road usage Loss of vehicle control on road shoulders Collisions with roadside obstacles or pedestrians Dangerous driving situations on freeways or one-way roads Summary The right and left edge line markings in South Africa define the boundaries of the roadway. Drivers must remain within these limits, use the shoulder only when legally permitted, and never cross the right-edge line on one-way roads or freeways.

On any road

To prohibit drivers from driving in this area.

Drive in such a way that you do not stop, park or drive over the island, unless on the orders of a traffic or police officer, to avoid a collision or in an emergency.

Overview The Longitudinal Regulatory Markings (South Africa) – Painted Island Marking are marked areas on the roadway designed to separate traffic flows, guide vehicles safely, or protect certain parts of the road from vehicle use. What the Marking Means A painted island is a road marking area bordered by solid lines and filled with diagonal stripes or other markings. Drivers are prohibited from driving, stopping, or parking within this marked area. The key purpose is: to keep vehicles out of restricted roadway areas used for traffic separation, safety, or channelisation. How It Works in Practice The painted island separates lanes or traffic directions. It may protect turning areas, intersections, or merging lanes. Vehicles must stay outside the marked island area. The marking helps improve traffic flow and reduce collisions. Driver Responsibilities Do not drive over the painted island Do not stop or park within the marked area Remain within the designated traffic lanes Only enter the island area in an emergency or on instructions from a traffic or police officer Where You Will See This Marking At intersections and junctions Near freeway off-ramps and merging lanes At traffic channelisation points On roads with lane separation or turning controls Purpose of the Marking Painted island markings improve road safety by separating traffic movements, guiding vehicles correctly, and preventing unsafe manoeuvres in restricted areas. Common Mistakes to Avoid Driving across the painted island to overtake or turn Stopping or parking within the marked area Using the island as an extra lane during congestion Ignoring lane guidance near intersections Safety Tips Stay fully within your designated lane Observe road markings well ahead of intersections Plan lane changes early and legally Only enter the painted island area during emergencies if unavoidable Penalties for Ignoring the Marking Ignoring painted island markings may result in: Traffic fines for illegal lane usage Collisions caused by improper lane movement Charges for reckless or negligent driving Obstruction of safe traffic flow Summary The painted island marking in South Africa indicates an area where vehicles may not drive, stop, or park. Drivers must remain outside the marked area unless instructed otherwise by authorities or in a genuine emergency.

On any road

To prohibit drivers from driving in this area.

Drive in such a way that you do not stop, park or drive over the island, unless on the orders of a traffic or police officer, to avoid a collision or in an emergency.

Overview The Longitudinal Regulatory Markings (South Africa) – Painted Island Marking is a marked area on the roadway used to separate traffic flows, guide vehicles, or protect certain sections of the road. Drivers are prohibited from driving, parking, or stopping within this marked area. What the Marking Means A painted island is a restricted area marked on the road surface that vehicles may not enter under normal circumstances. It is used to channel traffic safely and improve traffic control. How It Works in Practice The area is painted with diagonal lines or solid markings. It separates lanes or opposing traffic flows. It creates safe zones near intersections, merges, or hazards. Vehicles must travel around the painted island, not across it. Exceptions You may only enter or cross a painted island: On the instruction of a traffic officer or police officer To avoid a collision During a genuine emergency situation Driver Responsibilities Do not drive over the painted island Do not stop or park within the marked area Follow lane guidance around the island Remain alert near intersections and traffic splits Where You Will See This Marking This marking is commonly found: At intersections and junctions Near freeway off-ramps and merges At traffic channelisation points In areas requiring traffic separation or hazard protection Purpose of the Marking The purpose of the painted island marking is to regulate vehicle movement, separate traffic streams, and create safer road layouts by keeping vehicles out of restricted roadway areas. Common Mistakes to Avoid Driving across the painted island to save time Stopping or parking within the marked area Ignoring lane guidance around intersections Using the painted island as an overtaking space Safety Tips Stay within your designated lane at all times Observe road markings carefully near intersections Plan lane changes early before reaching the island Only enter the area during emergencies or official instruction Penalties for Ignoring the Marking Ignoring painted island markings may result in: Traffic fines for improper road usage Increased risk of collisions Disruption of traffic flow Legal consequences for reckless or negligent driving Summary The painted island marking in South Africa indicates a restricted roadway area where vehicles may not drive, stop, or park. Drivers must stay clear of the marked zone except in emergencies or when directed by authorities.

On any road

To prohibit drivers from driving in this area.

Drive in such a way that you do not stop, park or drive over the island, unless on the orders of a traffic or police officer, to avoid a collision or in an emergency.

Overview The Longitudinal Regulatory Markings (South Africa) – Painted Island Marking are specially marked sections of the roadway used to separate traffic, channel vehicle movement, and create protected areas where vehicles are not allowed to drive. What the Marking Means A painted island is an area outlined and filled with road markings, often diagonal stripes, that vehicles may not enter, stop on, or park in. The key purpose is: to prohibit vehicles from using a restricted section of the roadway reserved for traffic control and safety purposes. How It Works in Practice The painted island separates traffic lanes or directions. It may guide vehicles safely through intersections or merging areas. Drivers must keep their vehicles outside the marked area. The marking creates a buffer zone to reduce conflicts between vehicles. Driver Responsibilities Do not drive over the painted island Do not stop or park within the marked area Stay within the designated traffic lanes Only enter the painted island area if instructed by a traffic officer, to avoid a collision, or during an emergency Where You Will See This Marking At intersections and junctions Near freeway exits and merging lanes At lane-dividing or traffic-channelisation areas On roads requiring controlled traffic movement Purpose of the Marking Painted island markings improve safety by controlling vehicle positioning, separating traffic streams, and preventing unsafe driving movements in restricted areas. Common Mistakes to Avoid Driving across the island to shorten a turn Stopping or parking on the marked area Using the island as an extra lane during congestion Ignoring lane guidance approaching intersections Safety Tips Observe road markings carefully ahead of intersections Plan lane changes early and safely Remain fully within your marked lane Only cross into the island area in a genuine emergency Penalties for Ignoring the Marking Ignoring painted island markings may result in: Traffic fines for illegal lane usage Collisions caused by unsafe manoeuvres Charges for reckless or negligent driving Disruption of safe traffic flow Summary The painted island marking in South Africa indicates a restricted roadway area where vehicles may not drive, stop, or park. Drivers must stay outside the marked section except in emergencies or when directed by authorities.

On any road especially in urban areas.

To indicate where you may park.

Make sure that your vehicle is parked completely inside the lines that mark the parking bay. In the case of angle parking you must park as far as possible from the road, with the front of your vehicle not further than 150mm from the kerb but no part of the vehicle may be on or over the sidewalk.

Overview The Longitudinal Regulatory Markings (South Africa) – Parking Bay Marking is used on roads and in parking areas to indicate the exact spaces where vehicles are permitted to park. What the Marking Means Parking bay markings define designated parking spaces and show drivers where their vehicles must be positioned when parked. Vehicles must remain fully within the marked lines of the parking bay. How It Works in Practice Marked lines outline the permitted parking space. Vehicles must fit completely inside the bay. Angle parking bays require the vehicle to face toward the kerb. No part of the vehicle may obstruct the roadway or sidewalk. Rules for Angle Parking Park as far from the roadway as possible The front of the vehicle must be no further than 150 mm from the kerb No part of the vehicle may be on or over the sidewalk Driver Responsibilities Park fully within the marked parking bay lines Ensure your vehicle does not obstruct traffic or pedestrians Follow the direction and angle of the parking space Check for additional parking restrictions or signs Where You Will See This Marking This marking is commonly found: On urban streets In parking lots and shopping centres Near business districts and public facilities In residential and commercial parking zones Purpose of the Marking The purpose of parking bay markings is to organise parked vehicles safely and efficiently, maximise parking space usage, and keep roads and sidewalks clear for traffic and pedestrians. Common Mistakes to Avoid Parking over the bay lines Allowing part of the vehicle onto the sidewalk Parking too far from the kerb in angle parking areas Blocking adjacent parking bays or traffic lanes Safety Tips Check mirrors and surroundings before parking Align the vehicle carefully within the bay Leave enough space for other vehicles to manoeuvre Ensure pedestrians can use the sidewalk safely Penalties for Ignoring the Marking Ignoring parking bay markings may result in: Parking fines or penalties Vehicle towing in restricted areas Obstruction of pedestrians or traffic Damage to nearby vehicles Summary Parking bay markings in South Africa indicate where vehicles may legally park. Drivers must park completely within the marked lines and ensure that no part of the vehicle obstructs the roadway or sidewalk.

On any road before an intersection

To show that you may only proceed in the direction indicated by the arrow in your lane.

Choose the correct lane in time to travel in the direction you want to go. Make sure that other traffic is obeying the mandatory direction arrows in their lanes. Check your blind spot before turning right to see that a vehicle in the lane next to you who is suppose to turn right (because of the mandatory right-turn arrow in his lane) is not carrying straight on.

Overview The Longitudinal Regulatory Markings (South Africa) – Mandatory Direction Arrow Marking are road surface arrows painted in lanes before intersections. They indicate the only permitted direction of travel from that lane. What the Marking Means A mandatory direction arrow tells drivers that they must follow the direction shown in their lane. Options such as going straight, turning left, or turning right are controlled by lane assignment. The key purpose is: to ensure vehicles only proceed in the direction indicated by their lane and to organise safe lane-based movement at intersections. How It Works in Practice Each lane is assigned a specific direction (left, right, or straight). Drivers must follow the arrow shown in their lane. Lane choice must be made well in advance of the intersection. The markings help prevent confusion and unsafe lane changes. Driver Responsibilities Select the correct lane early according to your intended direction Do not turn or go straight if your lane prohibits it Check surrounding traffic for compliance with their arrows Use mirrors and blind spot checks before turning or changing lanes Important Safety Consideration Even if another driver is in a designated turn lane, always verify that they are actually turning before making your own manoeuvre, especially when turning right across adjacent lanes. Where You Will See This Marking Approaches to intersections and junctions Multi-lane urban roads Freeway off-ramps and urban interchanges High-traffic signalised intersections Purpose of the Marking Mandatory direction arrows improve traffic flow and safety by organising vehicles into correct turning or through lanes, reducing conflicts and intersection accidents. Common Mistakes to Avoid Changing lanes too late before an intersection Going straight from a turn-only lane Turning from a straight-only lane Assuming other drivers will follow their lane markings correctly Safety Tips Read lane markings early when approaching intersections Plan your route before entering busy junction areas Maintain awareness of adjacent lane movements Always check blind spots before turning Penalties for Ignoring the Marking Ignoring mandatory direction arrows may result in: Traffic fines for illegal lane use Dangerous intersection conflicts or collisions Charges for reckless or negligent driving Obstruction of traffic flow Summary Mandatory direction arrow markings in South Africa control lane-based movement at intersections. Drivers must follow the arrow in their lane and plan lane changes early to ensure safe and correct turning or straight-through travel.

On the left or right-hand side of a road in an urban area.

To identify that part of the carriageway which is reserved for buses only during the periods indicated on the sign.

If you are not driving a bus do not drive in the lane indicated by the sign during the times on the sign.

Overview The Longitudinal Regulatory Markings (South Africa) – Exclusive Lane Line Marking is used on urban roads to indicate a lane reserved for buses during specific times shown on accompanying road signs. What the Marking Means This marking shows that a portion of the roadway is designated as a bus-only lane. Only buses are allowed to use this lane during the restricted times indicated on the signs. How It Works in Practice The lane is clearly marked along the left or right side of the road. It is reserved for public transport buses during certain hours or periods. Outside restricted times, normal traffic rules may apply (depending on signage). It helps improve public transport efficiency and reduce congestion. Driver Responsibilities Do not drive in the bus-only lane during restricted times Always check time-based signage accompanying the lane marking Use only general traffic lanes if you are not operating a bus Be alert for buses entering or exiting the lane Where You Will See This Marking This marking is commonly found: In busy urban areas and city centres Along major commuter routes Near bus stops and transport corridors On roads prioritising public transport efficiency Purpose of the Marking The purpose of the exclusive bus lane marking is to prioritise public transport, improve travel times for buses, and reduce traffic congestion by separating buses from general traffic during peak or specified periods. Common Mistakes to Avoid Driving in the bus lane during restricted hours Ignoring time-based restrictions on signage Using the lane for overtaking Assuming the lane is always open to all vehicles Safety Tips Check both road markings and time signs carefully Plan lane changes early to avoid entering restricted lanes Watch for buses entering or exiting dedicated lanes Stay in general traffic lanes if unsure of restrictions Penalties for Ignoring the Marking Ignoring exclusive bus lane markings may result in: Traffic fines for unauthorised lane use Increased congestion and traffic disruption Dangerous interactions with public transport vehicles Legal consequences for repeated violations Summary The exclusive lane line marking in South Africa reserves certain road lanes for buses during specified times. Drivers of non-bus vehicles must avoid these lanes during restricted periods to support efficient public transport and safe traffic flow.