On any public road.

To cancel a restriction.

From here you do not have to comply with the restriction sign with a symbol similar to this sign but without the red cross.

Overview The End of Single-Carriageway Freeway Sign (Temporary De-Restriction Sign) in South Africa is used to indicate that a single-carriageway freeway section has ended. It removes all freeway-specific restrictions that applied from the point where the freeway began. What the Sign Means When this sign appears, it informs drivers that they are leaving a controlled-access single-carriageway freeway and entering a normal public road environment. The key rule is: freeway rules no longer apply beyond this point. How It Works in Practice The single-carriageway freeway section ends Restrictions such as limited stopping, controlled access, and freeway-only rules are cancelled Drivers may encounter intersections, property access points, or pedestrian activity again Normal road regulations resume immediately after the sign Driver Responsibilities Reduce speed appropriately when exiting freeway conditions Be alert for changing traffic patterns and possible intersections Watch for pedestrians, cyclists, and turning vehicles Adjust driving to suit non-freeway road conditions Where You Will See This Sign This sign is commonly used: At the end of single-carriageway expressways Where controlled-access roads transition into urban or rural roads Near exits from limited-access highway sections Purpose of the Sign The purpose of the End of Single-Carriageway Freeway Sign is to clearly mark the end of freeway conditions, ensuring drivers are aware that normal road rules and traffic interactions resume beyond this point. Common Mistakes to Avoid Continuing to drive at freeway speeds after the sign Failing to anticipate intersections or turning traffic Not adjusting to increased pedestrian or local traffic activity Safety Tips Gradually reduce speed when leaving freeway conditions Stay alert for traffic signals and junctions ahead Expect more frequent stops and slower traffic flow Summary The End of Single-Carriageway Freeway Sign in South Africa indicates the termination of freeway regulations and restores normal road conditions. It ensures drivers adjust safely from controlled-access roads to standard public roads.

Below a regulatory sign on any public road

To indicate that the regulatory sign applies only for the period(s) or during conditions indicated on this sign.

Obey the times on this sign.

Overview The One Period Time Limit Sign (Temporary Exclusive Secondary Message Sign) in South Africa is a regulatory supplementary sign placed beneath a main traffic sign. It is used to indicate that the main regulatory instruction applies only during a specific time period or under specific conditions. What the Sign Means When this sign is displayed under a regulatory sign, it means the restriction or instruction shown above it is not always active. Instead, it only applies during the time periods, days, or conditions indicated on the supplementary plate. The key rule is: the main sign is time-limited or condition-limited, not permanent. Driver Responsibilities Check the time periods or conditions shown on the sign carefully Only comply with the main restriction when it is active Understand that rules may change depending on time of day or conditions Pay attention to school hours, peak times, or special restrictions if indicated Always observe both the main sign and the supplementary message together Where You Will See This Sign Urban roads with peak-hour traffic restrictions School zones with time-based safety controls Loading zones with delivery time windows Areas with seasonal or temporary traffic management rules Purpose of the Sign The purpose of the One Period Time Limit Sign is to provide flexibility in traffic regulation by allowing certain rules to apply only at specific times or under certain conditions, improving traffic flow and reducing unnecessary restrictions. Common Mistakes to Avoid Assuming the main sign always applies Ignoring time restrictions shown on the plate Misreading operational hours or conditions Entering restricted areas during active time limits Safety Tips Always read both the main sign and the time plate together Be aware of peak-hour traffic rules in urban areas Check for updated or seasonal restrictions Plan stops or parking based on time-based rules Penalties for Ignoring the Sign Ignoring a time-limited regulatory instruction may result in: Fines for violating active restrictions Enforcement action during restricted periods Towing or penalties in restricted parking or loading zones Increased traffic safety risks in controlled areas Summary The One Period Time Limit Sign in South Africa indicates that a traffic rule is only active during specified times or conditions. Drivers must interpret it together with the main sign to understand when restrictions apply.

Below a regulatory sign on any public road

To indicate that the regulatory sign applies only for the period(s) or during conditions indicated on this sign.

Obey the times on this sign.

Overview The Two Periods Time Limit Sign (Temporary Exclusive Secondary Message Sign) in South Africa is a regulatory supplementary sign placed beneath a main traffic sign. It indicates that the main regulation applies only during two separate time periods or under specific conditions shown on the sign. What the Sign Means When this sign appears under a regulatory sign, it means the restriction above is not permanently active. Instead, it applies only during the two distinct time periods or conditions indicated on the supplementary plate. The key rule is: the main traffic rule applies only during the two specified periods or conditions. Driver Responsibilities Carefully check both time periods shown on the sign Understand when the restriction is active and when it is not Only comply with the main sign during the specified times or conditions Be aware that rules may differ between morning and afternoon or peak periods Always interpret the main sign together with the time plate Where You Will See This Sign Urban roads with morning and evening peak-hour controls School zones with multiple restricted periods Loading and delivery zones with split-time access rules City centres managing congestion at different times of day Purpose of the Sign The purpose of the Two Periods Time Limit Sign is to allow traffic rules to operate flexibly at different times of the day, improving traffic flow and ensuring restrictions only apply when necessary. Common Mistakes to Avoid Assuming the restriction is always active Misreading one of the time periods Entering restricted areas during active periods Ignoring differences between morning and evening rules Safety Tips Always read both time periods carefully before acting Check whether current time falls within a restricted period Be especially cautious in peak traffic zones Plan parking or travel based on both time windows Penalties for Ignoring the Sign Ignoring a Two Periods Time Limit Sign may result in: Fines for violating active restrictions Enforcement action during restricted time periods Towing in restricted parking or loading areas Increased congestion and safety risks in managed zones Summary The Two Periods Time Limit Sign in South Africa indicates that a traffic rule applies only during two separate time periods or conditions. Drivers must carefully interpret both time windows together with the main sign to ensure compliance.

Below a regulatory sign on any public road

To indicate that the regulatory sign applies only for the period(s) or during conditions indicated on this sign.

Obey the times on this sign.

Overview The Three Periods or Days Time Limit Sign (Temporary Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the main restriction applies only during three specific time periods or on three specific days (or under three sets of conditions) shown on the sign. What the Sign Means When this temporary sign is used, it modifies the main regulatory instruction by limiting its application to three separate periods, days, or conditions. Outside of those indicated times or days, the restriction does not apply. The key rule is: the restriction is only active during the three indicated periods or days shown on the sign. How It Works in Practice The main sign (such as no parking, loading restriction, or stopping control) is only valid during the three specified time windows or days Each period or day is clearly indicated on the secondary message panel Outside those times or days, normal road rules apply Driver Responsibilities Always read both the main regulatory sign and the secondary message together Check all three time periods or days carefully before acting Do not assume the restriction is continuous throughout the day or week Plan parking, stopping, or loading outside restricted windows Where You Will See This Sign This sign is commonly used: In busy urban areas with complex traffic management schedules Near commercial zones with different weekday operations At schools, hospitals, or institutions with varied daily schedules In loading or parking zones with multiple peak demand periods Purpose of the Sign The purpose of the Three Periods or Days Time Limit Sign is to allow flexible traffic regulation by applying restrictions only when necessary across three distinct periods or days, improving road efficiency while reducing unnecessary limitations at other times. Common Mistakes to Avoid Assuming the restriction applies all day or every day Ignoring one of the three indicated periods or days Misreading the schedule on the secondary panel Parking or stopping during any of the restricted windows Safety Tips Carefully check all three listed periods or days before acting Re-check signage if returning at different times or days Be aware enforcement only applies during active restriction periods Plan alternative parking or stopping options in advance Penalties for Ignoring the Sign Ignoring a Three Periods or Days Time Limit Sign may result in: Fines or traffic enforcement penalties Parking violations or towing (where applicable) Obstruction of traffic or loading operations during active periods Summary The Three Periods or Days Time Limit Sign in South Africa indicates that a restriction applies only during three specified time periods or days. It provides flexible traffic control while ensuring roads remain usable outside those defined conditions.

Below a regulatory sign on any public road

To limit the times and periods of stopping.

Do not stop or park for longer than the times indicated.

Overview The Maximum Stay During Two Periods or Days Time Limit Sign (Temporary Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory parking or stopping sign. It indicates that the allowed maximum parking or stopping duration only applies during two specific time periods or on two specific days shown on the sign. What the Sign Means When this sign is used, it limits how long a vehicle may stop or park under the main sign—but only during the two indicated time periods or days. Outside of those periods or days, the restriction does not apply or may change depending on other signage. The key rule is: maximum stopping or parking time is only enforced during the two specified periods or days. How It Works in Practice The main sign defines the type of restriction (e.g., limited parking or stopping zone) The secondary panel sets a maximum stay duration (e.g., 30 minutes, 2 hours) This limit applies only during the two indicated time periods or days Outside those times/days, different rules may apply or restrictions may be lifted Driver Responsibilities Always read both the main sign and the secondary message together Check both time periods or days before parking or stopping Do not exceed the allowed maximum stay during restricted times Be aware that enforcement may only apply during active restriction periods Where You Will See This Sign This sign is commonly used: In busy commercial areas with time-controlled parking bays Near shopping centres or business districts with peak-hour limits In loading zones with scheduled delivery restrictions In areas with different weekday or weekend parking rules Purpose of the Sign The purpose of the Maximum Stay During Two Periods or Days Time Limit Sign is to manage parking demand efficiently by limiting how long vehicles may stay during two specific peak periods or days, while allowing more flexible use of space outside those times. Common Mistakes to Avoid Ignoring the time/day conditions and overstaying during restricted periods Assuming the maximum stay applies all day or every day Misreading the allowed duration on the panel Returning and re-parking without checking time restrictions Safety Tips Always check both periods/days before parking Set a reminder to avoid overstaying during enforcement hours Look for additional signage that may change rules outside restricted times Re-check signs when returning later in the day or week Penalties for Ignoring the Sign Ignoring a Maximum Stay During Two Periods or Days Time Limit Sign may result in: Parking fines or penalties Towing or wheel clamping (where applicable) Overstay violations during controlled periods Summary The Maximum Stay During Two Periods or Days Time Limit Sign in South Africa controls parking duration only during two specified time periods or days. It ensures efficient use of limited parking space while allowing flexibility outside peak or regulated times.

Below a regulatory sign on any public road

To limit the times and periods of stopping.

Do not stop or park for longer than the times indicated.

Overview The Maximum Stay During One Period Time Limit Sign (Temporary Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory parking or stopping sign. It indicates that the maximum allowed time a vehicle may stop or park only applies during one specific time period or condition shown on the sign. What the Sign Means When this sign is used, it limits the duration of stopping or parking under the main sign—but only during one specified time period or set of conditions. Outside that period, the restriction may not apply or may be different depending on other signage. The key rule is: maximum stay applies only during the single indicated time period or condition. How It Works in Practice The main sign defines the parking or stopping restriction (e.g., limited parking zone) The secondary panel sets the maximum stay duration (e.g., 15 minutes, 1 hour, etc.) This limit is enforced only during the specified time period Outside that period, different rules or no restriction may apply Driver Responsibilities Always read both the main sign and the time limit panel together Check the specific time period before parking or stopping Do not exceed the allowed maximum stay during the restricted period Be aware that enforcement applies only during active restriction times Where You Will See This Sign This sign is commonly used: In shopping areas with short-term parking bays Near busy business districts with turnover parking At loading zones with controlled delivery times In areas where parking demand changes during the day Purpose of the Sign The purpose of the Maximum Stay During One Period Time Limit Sign is to manage parking turnover efficiently by restricting how long vehicles may stay during a specific time period, ensuring fair access to limited parking spaces. Common Mistakes to Avoid Assuming the maximum stay applies all day Ignoring the specified time period on the panel Overstaying during active enforcement hours Misreading the allowed parking duration Safety Tips Always check both the main sign and the time restriction carefully Set a reminder to avoid overstaying during enforcement periods Look for additional signs that may change rules outside the time period Re-check signage when returning later in the day Penalties for Ignoring the Sign Ignoring a Maximum Stay During One Period Time Limit Sign may result in: Parking fines or penalties Towing or clamping (where applicable) Overstay violations during controlled periods Summary The Maximum Stay During One Period Time Limit Sign in South Africa limits parking or stopping duration only during a single specified time period. It ensures efficient use of parking space while allowing flexibility outside the restricted time.

On any public road.

To inform you that the regulatory sign applies during daytime.

Obey the regulatory sign during daytime.

Overview The Day Condition Sign (Temporary Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the restriction shown by the main sign applies only during daytime conditions. What the Sign Means When this sign is used, it modifies the main regulatory instruction by limiting its effect to daylight hours only. Outside of daytime (typically at night), the restriction does not apply unless otherwise indicated by additional signage. The key rule is: the main restriction is only active during daytime. How It Works in Practice The main sign sets the restriction (e.g., no parking, loading control, or lane use rule) The day condition panel limits enforcement to daytime hours only At night, the restriction is generally lifted unless another sign states otherwise Driver Responsibilities Always read both the main sign and the day condition panel together Follow the restriction only during daylight hours Check for additional time-based signage that may override this condition Do not assume rules apply at night unless clearly stated Where You Will See This Sign This sign is commonly used: In urban parking zones with daytime restrictions Near schools, markets, or busy pedestrian areas In loading zones that operate mainly during business hours On roads with high daytime traffic congestion Purpose of the Sign The purpose of the Day Condition Sign is to apply traffic restrictions only during daytime when traffic activity is highest, improving road management efficiency while allowing more flexible use of space at night. Common Mistakes to Avoid Assuming the restriction applies 24 hours a day Ignoring daytime-only enforcement limits Misinterpreting night-time parking as illegal when it is allowed Overlooking additional time-based signage Safety Tips Always confirm whether it is day or night before acting on restrictions Check for additional panels that may define exact hours Re-check signage if returning at different times of day Be aware that enforcement typically focuses on peak daytime traffic periods Penalties for Ignoring the Sign Ignoring a Day Condition Sign may result in: Fines for violating daytime restrictions Parking penalties or towing (where applicable) Obstruction of traffic or loading operations during peak hours Summary The Day Condition Sign in South Africa indicates that a traffic restriction applies only during daytime hours. It ensures effective traffic management when demand is highest while allowing more flexible road use at night.

On any public road.

To inform you that the regulatory sign only applies during night time.

Obey the regulatory sign during night time.

Overview The Night Condition Sign (Temporary Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the restriction shown on the main sign applies only during night-time hours. What the Sign Means When this sign is used, it modifies the main regulatory instruction by limiting its effect to night-time conditions only. During daytime, the restriction generally does not apply unless another sign states otherwise. The key rule is: the main restriction is only active during night-time. How It Works in Practice The main sign indicates the type of restriction (e.g., no parking, loading control, or lane restriction) The night condition panel limits enforcement to night-time hours only During the day, normal road rules apply unless otherwise indicated Driver Responsibilities Always read both the main sign and the night condition panel together Follow the restriction only during night-time hours Check for additional signage that may define exact time ranges Do not assume restrictions apply during the day Where You Will See This Sign This sign is commonly used: In urban parking areas with night-time control measures Near entertainment districts or late-night activity zones In loading zones with overnight delivery restrictions On roads where traffic conditions change significantly at night Purpose of the Sign The purpose of the Night Condition Sign is to apply traffic restrictions only during night-time when different traffic patterns, safety risks, or operational needs exist, allowing more flexible use of roads during the day. Common Mistakes to Avoid Assuming the restriction applies 24 hours a day Ignoring night-time enforcement conditions Parking during restricted night hours thinking it is allowed Overlooking additional time-specific signage Safety Tips Always check whether it is currently night-time before relying on exemptions Look for additional panels defining exact hours (e.g., 18:00–06:00) Re-check signage if parking overnight Be aware that enforcement is typically stricter in night-time zones Penalties for Ignoring the Sign Ignoring a Night Condition Sign may result in: Fines for violating night-time restrictions Parking penalties or towing where applicable Obstruction of night-time traffic or operations Summary The Night Condition Sign in South Africa indicates that a traffic restriction applies only during night-time hours. It helps manage roads differently at night while keeping daytime use more flexible.

Below a regulatory sign.

To indicate that the restriction indicated on the regulatory sign applies in the direction of the arrow.

Obey the primary sign according to the direction indicated.

Overview The Reserved Movement to Left & Right by Vehicle Class Sign (Temporary Exclusive Secondary Message Sign) in South Africa is a regulatory supplementary sign placed beneath a main traffic sign. It indicates that the restriction or instruction shown on the main sign applies according to the direction(s) indicated by arrows—both left and right. What the Sign Means When this sign is displayed, it means that certain vehicle classes are subject to movement restrictions that require them to follow the indicated directions (left or right), depending on the layout shown. The restriction is not general; it is directional and applies only where the arrows point. The key rule is: the main restriction applies in the direction of the left and/or right arrows shown. Driver Responsibilities Follow the directional arrows exactly as displayed Check whether your vehicle class is affected by the restriction Do not proceed straight if only left/right movements are permitted Position your vehicle in the correct lane early Comply with all lane markings and traffic control devices Where You Will See This Sign Busy urban intersections with lane separation Traffic diversion points during construction or congestion management Interchanges with controlled vehicle movement patterns Areas separating different vehicle classes into different routes Purpose of the Sign The purpose of this sign is to guide specific vehicle classes into designated left or right movements, improving traffic organisation, reducing congestion, and ensuring safer intersection flow. Common Mistakes to Avoid Ignoring directional arrows and continuing straight Late lane changes at intersections Misunderstanding which vehicle classes are affected Using incorrect turning lanes under restriction Safety Tips Observe signage early and plan lane position in advance Follow arrows strictly for your vehicle class Be cautious of merging vehicles from adjacent lanes Reduce speed when approaching controlled intersections Penalties for Ignoring the Sign Ignoring a Reserved Movement to Left & Right by Vehicle Class Sign may result in: Traffic fines for incorrect lane or direction usage Non-compliance with vehicle class movement restrictions Increased risk of intersection collisions Enforcement action for disobeying directional controls Summary The Reserved Movement to Left & Right by Vehicle Class Sign in South Africa directs specific vehicle classes to move in designated left or right directions according to the arrows shown. It ensures safe and orderly traffic flow at controlled intersections and diversion points.

Below an appropriate regulatory sign.

To indicate that the sign applies to drivers of vehicles operated by the company, owner or organisation indicated by the logo or words.

If your vehicle belongs to the company or organisation indicated by this sign, obey the regulatory sign.

Overview The Operator Identity (Logo) Sign (Temporary Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the restriction or instruction on the main sign applies only to vehicles operated by a specific company, organisation, or fleet identified by a logo or name. What the Sign Means When this sign is used, it restricts or directs compliance based on vehicle operator identity. Only vehicles belonging to the company, owner, or organisation shown on the logo panel must follow the instruction on the main sign. The key rule is: the main sign applies only to vehicles operated by the identified organisation. How It Works in Practice The main regulatory sign defines the rule (e.g., parking restriction, lane use, stopping control) The operator identity panel identifies which vehicles must comply Only vehicles with the matching logo or operator branding are affected Other road users follow general road rules unless otherwise signed Driver Responsibilities Check whether your vehicle belongs to the identified operator or company Comply with the main sign only if the operator identity applies to you Do not assume restrictions apply to all vehicles Be aware that fleet or company vehicles may have special rules Where You Will See This Sign This sign is commonly used: In commercial depots and logistics centres At company parking facilities or private loading zones In fleet vehicle operations (delivery services, utilities, etc.) Within restricted-access industrial or corporate areas Purpose of the Sign The purpose of the Operator Identity (Logo) Sign is to apply traffic rules selectively to vehicles belonging to a specific organisation, improving operational efficiency in private or controlled transport environments. Common Mistakes to Avoid Assuming the restriction applies to all vehicles Ignoring operator-specific signage when driving a company vehicle Entering restricted areas without matching identification Misinterpreting logo-based restrictions as general rules Safety Tips Always check if your vehicle is part of the identified operator fleet Follow company or organisational driving rules carefully Be alert to private-property traffic regulations Confirm access permissions before entering controlled zones Penalties for Ignoring the Sign Ignoring an Operator Identity Sign may result in: Removal from restricted company areas Disciplinary action (for employees or fleet drivers) Fines or trespassing penalties (in private areas) Denial of access to operational facilities Summary The Operator Identity (Logo) Sign in South Africa limits the application of a traffic regulation to vehicles operated by a specific company or organisation. It is mainly used in private, commercial, or fleet-controlled environments to manage authorised vehicle movements.

Below an appropriate regulatory sign.

To indicate that the sign applies to drivers of vehicles with the displayed mass.

If your vehicle has the mass limit displayed, you have to comply with the primary sign.

Overview The Mass Limit Sign (Text) – Temporary Exclusive Secondary Message Sign in South Africa is a regulatory supplementary sign placed beneath a main traffic sign. It is used to indicate that the restriction applies specifically to vehicles based on their mass, as written on the sign. What the Sign Means When this sign is displayed, it means the main traffic regulation (such as entry, movement, stopping, or parking restrictions) applies only to vehicles that match the displayed mass limit or category. Vehicles above or below the specified mass may be treated differently depending on the instruction. The key rule is: the restriction applies to vehicles of the stated mass class or limit. Driver Responsibilities Check your vehicle’s Gross Vehicle Mass (GVM) or loaded mass Confirm whether your vehicle falls within the displayed mass category Only proceed if your vehicle complies with the stated limit Follow all additional instructions on the main regulatory sign Be aware that enforcement may include weighing or inspection Where You Will See This Sign Bridge or road sections with structural load limits Narrow or sensitive roads with weight restrictions Construction zones and temporary diversions Industrial or access-controlled areas Purpose of the Sign The purpose of the Mass Limit Sign (Text) is to protect road infrastructure and ensure safety by restricting or allowing access based on vehicle weight classifications. Common Mistakes to Avoid Ignoring vehicle weight when entering restricted roads Confusing tare mass with gross vehicle mass (GVM) Entering restricted areas without checking load weight Assuming light vehicles are always exempt Safety Tips Know your vehicle’s official mass rating before travel Check signage carefully before entering restricted routes Be cautious when carrying heavy loads or towing Follow diversion signs if your vehicle exceeds the limit Penalties for Ignoring the Sign Ignoring a Mass Limit Sign (Text) may result in: Fines for exceeding road weight restrictions Vehicle removal or forced rerouting Damage liability for infrastructure Safety risks on structurally limited roads Summary The Mass Limit Sign (Text) in South Africa restricts or permits vehicle access based on the stated mass limit. It ensures that only appropriately weighted vehicles use certain roads or sections to protect infrastructure and improve safety.

Below an appropriate regulatory sign.

To indicate that Local access is also allowed.

Overview The Motor Cycle Engine Size Limit Sign (Text) (Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates that the restriction shown on the main sign applies only to motorcyclists whose motorcycles have a specific engine size as displayed on the panel. What the Sign Means When this sign is used, it limits the applicability of the main traffic regulation to motorcycles based on engine capacity (usually measured in cubic centimetres, e.g., 125cc, 250cc, etc.). Only riders whose motorcycles match the specified engine size condition must comply with the restriction. The key rule is: the main sign applies only to motorcycles with the indicated engine size. How It Works in Practice The main regulatory sign sets the rule (e.g., access restriction, lane use, or parking control) The secondary panel specifies the engine size category affected Only motorcycles matching that engine size must follow the restriction Other motorcycles outside the specified engine size are not affected unless otherwise indicated Driver Responsibilities Check your motorcycle’s engine capacity before entering restricted areas Follow the restriction only if your engine size matches the sign Do not assume all motorcycles are treated the same Pay attention to whether the restriction specifies minimum, maximum, or exact engine size Where You Will See This Sign This sign is commonly used: In urban traffic zones with restrictions on smaller or larger motorcycles On highways or expressways with minimum engine capacity requirements In controlled-access areas prioritising high-performance motorcycles Near event zones or restricted urban corridors Purpose of the Sign The purpose of the Motor Cycle Engine Size Limit Sign is to regulate motorcycle access or movement based on engine capacity, helping improve safety, traffic flow, and suitability of vehicles for specific road environments. Common Mistakes to Avoid Entering restricted roads without checking engine size requirements Confusing minimum and maximum engine capacity limits Assuming all motorcycles have the same access rights Ignoring signage at highway or controlled-access entry points Safety Tips Know your motorcycle’s exact engine size (cc rating) Check signage carefully before entering restricted zones Avoid using unsuitable roads for your motorcycle class Follow alternative routes if your vehicle does not comply Penalties for Ignoring the Sign Ignoring a Motor Cycle Engine Size Limit Sign may result in: Fines or traffic enforcement penalties Being denied access to restricted road sections Increased safety risk on high-speed or unsuitable roads Possible removal from controlled-access areas Summary The Motor Cycle Engine Size Limit Sign in South Africa restricts certain traffic rules to motorcycles with a specific engine size. It helps ensure that only suitable motorcycles use certain roads or lanes for safety and traffic efficiency.

Below an appropriate regulatory sign.

To indicate for which distance ahead the sign applies to.

You need to comply with the primary sign for distance ahead as displayed.

Overview The Distance “For” Limit Sign (Text) (Temporary Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory traffic sign. It indicates the length of road ahead over which the main sign’s restriction or instruction applies. What the Sign Means When this sign is displayed, it tells drivers that the rule shown on the main sign is valid for a specified distance ahead (e.g., “FOR 2 km”). After that distance ends, the restriction no longer applies unless repeated or extended by another sign. The key rule is: the restriction applies continuously for the distance stated on the panel. How It Works in Practice The main regulatory sign sets the rule (e.g., no overtaking, speed limit, no stopping) The “FOR” panel specifies how far the rule applies (e.g., 500 m, 2 km) The restriction begins at the sign and continues for the stated distance After that distance, normal road rules resume unless otherwise indicated Driver Responsibilities Read both the main sign and the distance panel together Comply with the restriction for the full stated distance Do not assume the rule ends early unless a cancellation sign appears Stay alert for changes in road conditions within the specified distance Where You Will See This Sign This sign is commonly used: In roadworks or temporary traffic control zones On highways with extended restrictions (e.g., no overtaking zones) Near hazardous road sections such as curves, bridges, or steep descents In areas requiring controlled traffic flow over a defined distance Purpose of the Sign The purpose of the Distance “For” Limit Sign is to clearly define how long a restriction applies, helping drivers understand the extent of controlled zones and maintain safe, consistent behaviour over that distance. Common Mistakes to Avoid Ignoring the distance and ending compliance too early Assuming the restriction applies indefinitely Failing to monitor distance travelled after passing the sign Missing follow-up signs that extend or cancel the restriction Safety Tips Estimate or track the distance after passing the sign Stay consistent with the restriction until the distance ends Watch for end-of-restriction or new regulatory signs Be extra cautious in temporary or hazardous zones Penalties for Ignoring the Sign Ignoring a Distance “For” Limit Sign may result in: Fines or enforcement penalties Violations of speed, overtaking, or stopping rules Increased risk of accidents in controlled zones Summary The Distance “For” Limit Sign (Text) in South Africa indicates the length of road ahead over which a restriction applies. It ensures drivers maintain compliance for the full specified distance, improving safety and traffic control.

Below the appropriate regulatory sign.

To indicate to the driver that the reservation indicated on the regulatory sign is further restricted by a maximum number of vehicles as indicated on this sign.

Do not enter an area if that would mean there would be more than the number of vehicles indicated.

Overview The Maximum Number of Vehicles Sign (Temporary Exclusive Secondary Message Sign) in South Africa is a supplementary panel placed beneath a main regulatory sign. It indicates that the reservation or permission shown on the main sign is limited to a specific maximum number of vehicles at any given time. What the Sign Means When this sign is used, it restricts access, parking, or use of a reserved area by limiting how many vehicles may occupy or use that space simultaneously. The key rule is: only the specified number of vehicles may use the reserved space or facility at one time. How It Works in Practice The main regulatory sign defines the type of reservation (e.g., parking, loading zone, vehicle class use) The secondary panel specifies the maximum number of vehicles allowed (e.g., “MAX 3 VEHICLES”) Once the limit is reached, additional vehicles are not permitted to enter or use the space Drivers must wait or find alternative areas if the limit is exceeded Driver Responsibilities Check whether the maximum number of vehicles has already been reached Do not enter or use the reserved space if it exceeds the stated limit Follow any additional instructions from traffic officials or attendants Use alternative parking or access points if necessary Where You Will See This Sign This sign is commonly used: In loading bays with limited capacity At taxi ranks, bus stops, or transport facilities In construction or work zones with controlled vehicle access At event venues or temporary traffic management areas Purpose of the Sign The purpose of the Maximum Number of Vehicles Sign is to prevent overcrowding and ensure safe, orderly use of limited space by restricting the number of vehicles allowed at any one time. Common Mistakes to Avoid Ignoring the vehicle limit and entering an already full area Assuming the limit is flexible or not enforced Blocking access while waiting for space Failing to observe occupancy before entering Safety Tips Check the area before entering to ensure space is available Be patient and wait for a vehicle to leave if necessary Avoid obstructing traffic while waiting Follow instructions from traffic officials or signage Penalties for Ignoring the Sign Ignoring a Maximum Number of Vehicles Sign may result in: Fines or enforcement penalties Removal from the restricted area Obstruction or congestion violations Increased risk of accidents in overcrowded spaces Summary The Maximum Number of Vehicles Sign in South Africa limits how many vehicles may use a reserved space at the same time. It helps maintain safe, efficient, and orderly traffic flow in restricted or high-demand areas.

On any public road.

Inform you of the speed limit applicable on this road. The restriction applies from the sign.

Do not exceed the speed indicated by this sign.

Overview The Speed Limit Sign in South Africa is a regulatory prohibition sign used on all public roads to indicate the maximum legal speed allowed for vehicles. It is one of the most important road signs for controlling traffic safety and managing road conditions. What the Sign Means When a driver sees this sign, it indicates the highest speed at which they are legally allowed to travel on that section of road. The restriction applies immediately from the point where the sign is placed and continues until a new speed limit sign or end-of-restriction sign appears. The key rule is: do not exceed the posted speed limit at any time. Driver Responsibilities Adjust your speed immediately to match the posted limit Maintain safe speed according to road and weather conditions Be alert for changing speed zones (e.g., schools or urban areas) Reduce speed in poor visibility, rain, or heavy traffic Observe all additional temporary speed restrictions in roadworks Where You Will See This Sign This sign is commonly found: On all public roads and highways At entry points to towns and cities Near schools, residential areas, and pedestrian zones In roadworks and temporary traffic control zones Purpose of the Sign The purpose of the Speed Limit Sign is to regulate traffic speed to improve safety for all road users. It helps reduce accidents, improve traffic flow, and ensure safe driving conditions based on road design and environment. Common Mistakes to Avoid Continuing at high speed after entering a lower speed zone Ignoring temporary speed limits in construction areas Assuming speed limits remain the same throughout a journey Driving too fast for road or weather conditions Safety Tips Always scan for new speed limit signs when driving Reduce speed gradually when entering urban or built-up areas Drive below the limit when conditions are unsafe Be extra cautious in unfamiliar areas Penalties for Ignoring the Sign Exceeding the posted speed limit is a traffic offence and may result in: Fines based on speed over the limit Demerit points (where applicable) Licence suspension for repeated violations Increased risk of serious accidents Summary The Speed Limit Sign in South Africa sets the maximum legal driving speed on a road. It applies immediately upon passing the sign and remains in force until changed by another sign or restriction.

On any public road.

To prevent certain heavy vehicles from using a road or part of a road.

If the GVM or GCM of your vehicle exceeds the mass indicated in tons, use another road or part of the road, which is not indicated by this sign. If your vehicle’s GVM or GCM is less than the indicated mass in tons, you may use this road.

Overview The Mass Limit Sign in South Africa is a temporary prohibition sign used on public roads to restrict access for vehicles exceeding a specified weight. It is commonly used to protect road surfaces, bridges, and infrastructure from damage caused by heavy vehicles. What the Sign Means When a driver encounters this sign, it means that vehicles above the indicated mass limit are not allowed to use the road or section ahead. The restriction applies immediately and remains in force until another sign indicates otherwise. The key rule is: do not enter if your vehicle exceeds the stated mass limit. Driver Responsibilities Check your vehicle’s gross vehicle mass (GVM) before entering Do not proceed if your vehicle exceeds the indicated limit Use alternative routes for heavy vehicles where available Follow all additional temporary restriction signs in the area Be aware that enforcement may be stricter in roadwork zones Where You Will See This Sign This sign is commonly found: On bridges and weight-restricted structures In roadworks or maintenance zones On rural or narrow roads with limited load capacity In temporary detours or diversion routes Purpose of the Sign The purpose of the Mass Limit Sign is to protect road infrastructure by limiting access to vehicles that exceed safe weight thresholds. It helps prevent structural damage, improve safety, and ensure roads remain usable for all permitted traffic. Common Mistakes to Avoid Entering without checking your vehicle’s weight rating Assuming light loads make heavy vehicles exempt Ignoring temporary restrictions during construction Using restricted roads as shortcuts for heavy transport Safety Tips Always know your vehicle’s legal mass limits Plan alternative routes for heavy loads in advance Slow down and read all temporary signage carefully Avoid reversing or turning around in restricted zones Penalties for Ignoring the Sign Ignoring a Mass Limit Sign is a traffic offence and may result in: Fines Demerit points (where applicable) Vehicle removal or forced rerouting Liability for damage to road infrastructure Summary The Mass Limit Sign in South Africa restricts heavy vehicles from using certain roads or sections to protect infrastructure and ensure safety. It is especially important in temporary or vulnerable road conditions such as construction or bridge crossings.

On any public road.

To prohibit certain heavy vehicles from using the road.

If the axle mass of any of your vehicle’s axles exceeds the indicated mass in tons, use another road or part of the road not indicated by this sign.

Overview The Axle Massload Limit Sign in South Africa is a temporary prohibition sign used on public roads to control the maximum load carried on a single axle of a vehicle. It is mainly applied to protect road surfaces, bridges, and other infrastructure from excessive concentrated weight. What the Sign Means When a driver encounters this sign, it means that vehicles with an axle load exceeding the stated limit are not allowed to use the road or section ahead. Even if the total vehicle mass is within limits, exceeding the axle load restriction is prohibited. The key rule is: do not proceed if any axle exceeds the indicated weight limit. Driver Responsibilities Check your vehicle’s axle load before entering the road Ensure loads are properly distributed across axles Do not enter if any axle exceeds the posted limit Use designated alternative routes for heavy vehicles Comply with all temporary traffic restriction signage Where You Will See This Sign This sign is commonly found: On bridges and structurally sensitive roads In roadworks and maintenance zones On rural or narrow roads with limited load capacity Along temporary detour or diversion routes Purpose of the Sign The purpose of the Axle Massload Limit Sign is to prevent concentrated heavy loads from damaging road surfaces and infrastructure. It helps ensure safety and prolongs the lifespan of roads by controlling how weight is distributed across vehicles. Common Mistakes to Avoid Confusing total vehicle mass with axle load limits Overloading a single axle while staying within total weight limits Ignoring temporary restrictions in construction zones Assuming all heavy vehicles are automatically allowed Safety Tips Distribute cargo evenly across all axles Know your vehicle’s axle load specifications Plan routes suitable for heavy freight transport Slow down and check signage carefully in restricted zones Penalties for Ignoring the Sign Ignoring an Axle Massload Limit Sign is a traffic offence and may result in: Fines Demerit points (where applicable) Vehicle removal or forced diversion Liability for damage to road infrastructure or bridges Summary The Axle Massload Limit Sign in South Africa restricts vehicles with excessive axle loads from using certain roads. It is essential for protecting infrastructure and ensuring safe distribution of heavy vehicle weight.

On any public road.

To warn you against a height restriction ahead.

If your vehicle (or load) is higher than the indicated height in metres, another road not indicated by this sign, must be used.

Overview The Height Limit Sign in South Africa is a temporary prohibition sign used on public roads to warn drivers of a maximum height restriction ahead. It is typically placed before low bridges, tunnels, overhead structures, or temporary road obstructions. What the Sign Means When a driver encounters this sign, it indicates that vehicles exceeding the stated height are not allowed to proceed beyond the restriction point. The height limit applies immediately and is intended to prevent collisions with overhead structures. The key rule is: do not proceed if your vehicle exceeds the indicated height limit. Driver Responsibilities Know your vehicle’s total height, including load Do not enter if your vehicle exceeds the posted height limit Choose alternative routes for high vehicles Be extra cautious in unfamiliar areas or construction zones Check signage early to avoid last-minute stops or reversals Where You Will See This Sign This sign is commonly found: Before tunnels and low bridges Under pedestrian walkways or overhead structures In roadworks with temporary height restrictions In industrial or urban areas with overhead cables or barriers Purpose of the Sign The purpose of the Height Limit Sign is to prevent vehicles from striking overhead structures, which can cause serious accidents, vehicle damage, and infrastructure damage. It ensures safe clearance for all permitted traffic. Common Mistakes to Avoid Forgetting to include cargo height when measuring clearance Attempting to pass under low structures without checking limits Ignoring temporary height restrictions in roadworks Assuming all routes are suitable for tall vehicles Safety Tips Always know your full vehicle height including load Plan routes suitable for high vehicles in advance Slow down and observe all warning signs early Never attempt to pass under a structure if unsure of clearance Penalties for Ignoring the Sign Ignoring a Height Limit Sign is a traffic offence and may result in: Fines Demerit points (where applicable) Serious vehicle and infrastructure damage liability Road obstruction penalties due to accidents or stuck vehicles Summary The Height Limit Sign in South Africa warns drivers of overhead clearance restrictions on roads. It is essential for preventing collisions with bridges, tunnels, and other structures by ensuring only appropriately sized vehicles proceed.

On any public road, especially in mountainous areas.

To prohibit long vehicles from using a road where such a vehicle will not be able to negotiate a curve or will turn in such a manner that it will disrupt or endanger other traffic.

If applicable, take an alternative route.

Overview The Length Limit Sign in South Africa is a temporary prohibition sign used on public roads to restrict vehicles that exceed a specified length. It is especially important in areas with sharp bends, narrow lanes, or mountainous terrain where long vehicles may struggle to manoeuvre safely. What the Sign Means When a driver encounters this sign, it means that vehicles longer than the indicated limit are not permitted to proceed beyond that point. The restriction is in place to prevent long vehicles from becoming stuck, blocking the road, or creating dangerous turning situations. The key rule is: do not enter if your vehicle exceeds the stated length limit. Driver Responsibilities Know the total length of your vehicle, including trailers Do not proceed if your vehicle exceeds the limit shown Use approved alternative routes for long vehicles Be cautious when planning routes through mountainous areas Avoid reversing or attempting tight turns in restricted zones Where You Will See This Sign This sign is commonly found: In mountainous or winding road areas On narrow rural or gravel roads Near sharp bends or tight junctions In temporary detours or construction zones Purpose of the Sign The purpose of the Length Limit Sign is to prevent traffic obstruction and improve safety by restricting long vehicles from roads they cannot safely navigate. It reduces the risk of accidents, road blockages, and dangerous turning manoeuvres in confined spaces. Common Mistakes to Avoid Ignoring trailer length when measuring vehicle size Entering winding roads without checking restrictions Assuming all trucks or buses can pass safely Attempting tight turns in restricted areas Safety Tips Always know the full length of your vehicle combination Plan routes suitable for long vehicles in advance Slow down in mountainous or narrow road areas Follow diversion signs for heavy or long transport Penalties for Ignoring the Sign Ignoring a Length Limit Sign is a traffic offence and may result in: Fines Demerit points (where applicable) Vehicle obstruction or recovery costs Liability for damage or traffic disruption Summary The Length Limit Sign in South Africa restricts long vehicles from using roads where manoeuvring space is limited. It ensures safe traffic flow and prevents dangerous situations in narrow or winding road environments.

On any public road usually near hospitals, churches and homes for the aged.

To prohibit noise.

If the noise level of your vehicle is high, you may not proceed past the sign, and for 100 metres after passing the sign, the vehicle’s hooter may not be used.

Overview The Excessive Noise Prohibition Sign in South Africa is a temporary prohibition sign used to control noise levels on certain public roads. It is typically placed in sensitive areas where noise disturbance must be minimised, such as near hospitals, churches, and homes for the aged. What the Sign Means When a driver encounters this sign, it means that excessive noise is not allowed in the area beyond the sign. This includes loud hooting, engine revving, or unnecessary vehicle noise that could disturb the surrounding environment. The key rule is: keep noise levels to a minimum—no unnecessary loud sounds allowed. Driver Responsibilities Avoid hooting unless it is an emergency Do not rev engines unnecessarily Maintain low engine noise and smooth driving Respect silence zones such as hospitals and care facilities Where You Will See This Sign This sign is commonly found: Near hospitals and medical facilities Around churches and places of worship Near homes for the aged and care centres In residential areas requiring noise control Purpose of the Sign The purpose of the Excessive Noise Prohibition Sign is to protect vulnerable individuals and maintain a quiet, peaceful environment in sensitive areas. It helps reduce stress, improve safety, and ensure respect for community spaces. Common Mistakes to Avoid Hooting unnecessarily in quiet zones Playing loud music while driving through restricted areas Revving engines or accelerating aggressively Ignoring local noise-sensitive signage Safety Tips Drive slowly and smoothly in noise-restricted areas Keep vehicle windows and sound systems at low levels Be especially cautious near hospitals and schools Respect posted signage even if no enforcement is visible Penalties for Ignoring the Sign Ignoring an Excessive Noise Prohibition Sign is a traffic offence and may result in: Fines Demerit points (where applicable) Noise violation penalties under local by-laws Complaints or legal action in sensitive zones Summary The Excessive Noise Prohibition Sign in South Africa restricts unnecessary loud noise in sensitive public areas. It helps maintain peace and protect vulnerable communities such as patients, worshippers, and the elderly.

On any public road.

To prohibit pedestrians and stationary vehicles.

No pedestrian may attempt to be picked up by a passing vehicle. A driver of a vehicle may not pick up passengers for the next 500m.

Overview The Hitch-Hiking Prohibited Sign in South Africa is a temporary prohibition sign used on public roads to prevent hitch-hiking and unsafe roadside stopping. It is applied in areas where stopping on the roadside or soliciting lifts could create safety hazards or disrupt traffic flow. What the Sign Means When this sign is present, it means pedestrians are not allowed to stand on the road or shoulder to request lifts, and vehicles are not permitted to stop for hitch-hikers in the restricted area. The key rule is: no hitch-hiking and no stopping for pedestrians in the restricted zone. Driver Responsibilities Do not stop for hitch-hikers where the sign is displayed Avoid picking up pedestrians from the roadside in restricted areas Continue driving safely without unnecessary stopping Remain alert for pedestrians near the roadside Where You Will See This Sign This sign is commonly found: On highways and high-speed roads Near busy intersections and interchanges In urban or industrial areas with safety risks In zones where roadside stopping is dangerous or illegal Purpose of the Sign The purpose of the Hitch-Hiking Prohibited Sign is to improve road safety by preventing pedestrians from standing in dangerous areas and stopping vehicles from making unsafe stops. It helps reduce accidents, traffic disruptions, and security risks. Common Mistakes to Avoid Stopping on highways to pick up passengers Allowing pedestrians to stand in unsafe roadside areas Ignoring prohibition signs in high-speed zones Confusing safe rest areas with restricted hitch-hiking zones Safety Tips Only pick up passengers at designated stops or safe areas Avoid slowing down unnecessarily on high-speed roads Be alert for pedestrians near road edges Use formal transport or stop areas instead of roadside pickups Penalties for Ignoring the Sign Ignoring a Hitch-Hiking Prohibited Sign is a traffic offence and may result in: Fines Demerit points (where applicable) Increased safety and security risks Possible enforcement action for unsafe stopping Summary The Hitch-Hiking Prohibited Sign in South Africa prevents pedestrians from soliciting lifts and restricts vehicles from stopping in unsafe roadside areas. It is designed to improve safety on high-risk and high-speed roads.

On any public road where it is necessary to close the road for general traffic.

To prohibit drivers without special authorisation from entering a certain road or section of a road.

Do not proceed past the sign or enter the road without special permission.

Overview The Unauthorized Vehicles Prohibited Sign in South Africa is a temporary prohibition sign used to restrict access to a specific road or section of road. It is typically used when a road must be closed to general traffic and reserved only for authorised vehicles. What the Sign Means When a driver encounters this sign, it means that only vehicles with special permission are allowed to enter the road or area beyond the sign. All other vehicles must not proceed. The key rule is: entry is restricted unless you have official authorisation. Driver Responsibilities Do not enter the restricted road without permission Follow detour routes provided for general traffic Comply with instructions from traffic officers or road marshals Respect temporary closures even if the road appears accessible Where You Will See This Sign This sign is commonly found: At roadworks and construction zones During special events or public gatherings In emergency or disaster response areas On temporarily closed roads for maintenance or safety reasons Purpose of the Sign The purpose of the Unauthorized Vehicles Prohibited Sign is to control access to roads that are temporarily closed or restricted. It ensures safety for workers, emergency services, and authorised personnel while preventing unauthorised entry. Common Mistakes to Avoid Entering closed roads without checking for restrictions Ignoring temporary construction or event signage Following other vehicles into restricted areas Assuming road closures do not apply outside working hours Safety Tips Always look for diversion and closure signs in advance Follow alternative routes provided by traffic authorities Be alert for changing road conditions in work zones Respect barriers, cones, and flag personnel instructions Penalties for Ignoring the Sign Ignoring an Unauthorized Vehicles Prohibited Sign is a serious traffic offence and may result in: Fines Demerit points (where applicable) Towing or removal of vehicles Legal liability for entering restricted or hazardous areas Summary The Unauthorized Vehicles Prohibited Sign in South Africa restricts access to roads that are temporarily closed to general traffic. It ensures safety and controlled access for authorised vehicles only during special conditions such as construction or events.

On any public road before a junction.

To prohibit vehicles from turning at an intersection.

Do not turn left ahead at the next junction.

Overview The Left Turn Ahead Prohibited Sign in South Africa is a temporary prohibition sign used on public roads before intersections. It indicates that vehicles are not allowed to make a left turn at the upcoming junction. What the Sign Means When a driver encounters this sign, it means that turning left at the next intersection is prohibited. Drivers must continue straight or choose another permitted direction as indicated by other road signs or detours. The key rule is: no left turn allowed at the upcoming junction. Driver Responsibilities Do not attempt to turn left at the restricted intersection Follow alternative routes or detour instructions Observe additional signage controlling turning movements Plan your route in advance when restrictions are present Where You Will See This Sign This sign is commonly found: Near roadworks or temporary traffic control zones At busy intersections during peak traffic management In areas with construction or lane closures Where turning movements are temporarily restricted for safety Purpose of the Sign The purpose of the Left Turn Ahead Prohibited Sign is to manage traffic flow and improve safety at intersections where turning movements may be dangerous or obstructive. It helps reduce congestion and prevents conflicts between vehicles and roadworks or other traffic. Common Mistakes to Avoid Attempting to turn left despite the prohibition Missing temporary detour signage Following incorrect lane positioning before intersections Ignoring roadworker or traffic officer instructions Safety Tips Always check advance warning signs before intersections Reduce speed when approaching controlled junctions Follow marked detour routes carefully Be alert for sudden changes in traffic flow during roadworks Penalties for Ignoring the Sign Ignoring a Left Turn Ahead Prohibited Sign is a traffic offence and may result in: Fines Demerit points (where applicable) Increased risk of collisions at intersections Traffic obstruction penalties in controlled zones Summary The Left Turn Ahead Prohibited Sign in South Africa restricts drivers from turning left at the upcoming intersection. It is used to improve safety and traffic flow, especially in temporary or high-traffic management areas.

On any public road before a junction.

To prohibit vehicles from turning at an intersection.

Do not turn right ahead at the next junction.

Overview The Right Turn Ahead Prohibited Sign in South Africa is a temporary prohibition sign used on public roads before intersections. It indicates that vehicles are not allowed to make a right turn at the upcoming junction. What the Sign Means When a driver encounters this sign, it means that turning right at the next intersection is prohibited. Drivers must continue straight or follow any alternative permitted routes indicated by other signs or detours. The key rule is: no right turn allowed at the upcoming junction. Driver Responsibilities Do not attempt to turn right at the restricted intersection Follow detour or alternative route instructions Observe temporary traffic control signage and markings Plan your route in advance when restrictions are in place Where You Will See This Sign This sign is commonly found: At roadworks and temporary traffic diversion zones At busy intersections under traffic control In construction areas where lanes are restricted During events or situations requiring traffic rerouting Purpose of the Sign The purpose of the Right Turn Ahead Prohibited Sign is to improve safety and traffic flow at intersections where right-turn movements may cause congestion or conflict with other vehicles or roadwork activity. Common Mistakes to Avoid Attempting to turn right despite the restriction Missing temporary detour signage Positioning in the wrong lane before the intersection Ignoring instructions from traffic officers or signage Safety Tips Always check for advance warning signs before intersections Slow down when approaching controlled junctions Follow marked detour routes carefully Stay alert for changing traffic patterns in roadwork areas Penalties for Ignoring the Sign Ignoring a Right Turn Ahead Prohibited Sign is a traffic offence and may result in: Fines Demerit points (where applicable) Increased risk of intersection collisions Traffic obstruction penalties in controlled zones Summary The Right Turn Ahead Prohibited Sign in South Africa restricts vehicles from turning right at the next intersection. It helps maintain safe and efficient traffic flow, especially in temporary or high-risk traffic control areas.