On any road before a intersection with traffic light.

To warn that there are isolated and particularly new traffic lights or traffic lights near an isolated traffic light at a pedestrian crossing ahead.

Slow down immediately and be ready to stop if the light changes from green to amber. Make sure there are no pedestrians or cross-traffic who might not obey the signals.

Overview The Temporary Symbolic Signs (South Africa) – Traffic Signal Ahead Sign is a warning sign used on public roads to alert drivers that a traffic light-controlled intersection or pedestrian crossing is approaching. It is especially used where traffic signals may be new, isolated, or unexpected. What the Sign Means This sign warns that there are traffic lights ahead, either at an intersection or near a pedestrian crossing. Drivers must prepare to stop because the signal may change quickly, and traffic control is in effect. How It Works in Practice A traffic light-controlled intersection or crossing is ahead. The traffic signals may be newly installed or located in isolated areas. Signal changes can happen unexpectedly for approaching drivers. Pedestrians or cross-traffic may also be present. Driver Responsibilities Slow down immediately when approaching the sign Be ready to stop if the light changes to amber or red Observe all traffic signals carefully Watch for pedestrians and cross-traffic that may not obey signals Where You Will See This Sign This sign is commonly found: Before intersections with traffic lights At newly installed traffic signal locations Near isolated pedestrian crossings with signal control Purpose of the Sign The purpose of the traffic signal ahead sign is to warn drivers of upcoming traffic lights so they can reduce speed in advance, prepare to stop, and safely respond to signal changes and surrounding road users. Common Mistakes to Avoid Approaching traffic lights at high speed Failing to anticipate sudden signal changes Not checking for pedestrians at crossings Ignoring newly installed or unexpected traffic signals Safety Tips Reduce speed well before reaching the intersection Prepare to stop when approaching amber or red signals Scan the area for pedestrians and vehicles Maintain safe following distances Penalties for Ignoring the Sign Ignoring this warning may result in: Traffic fines for speeding or signal violations Collisions at intersections or crossings Legal consequences in the event of an accident Risk of injury to pedestrians and other road users Summary The traffic signal ahead sign in South Africa warns drivers of upcoming traffic lights or controlled pedestrian crossings. Drivers must slow down, stay alert, and be prepared to stop for signal changes and vulnerable road users.

On any road before a intersection with a stop sign.

To warn that there is a stop sign ahead, which cannot be seen in time.

Slow down in good time and be ready to stop

Overview The Temporary Symbolic Signs (South Africa) – Traffic Control “Stop” Ahead Sign is a warning sign used on public roads to alert drivers that a stop sign is approaching and may not yet be visible in time to react safely. What the Sign Means This sign warns that a mandatory stop-controlled intersection is ahead. Drivers may not be able to see the actual stop sign until they are close, so early preparation is required. How It Works in Practice A stop sign is located at an upcoming intersection. The stop sign may be hidden or not visible from a distance. Drivers must prepare to come to a complete stop. Cross-traffic may have right of way at the intersection. Driver Responsibilities Slow down well in advance of the intersection Be prepared to come to a complete stop Look carefully for the actual stop sign and intersection markings Yield to all cross-traffic where required Where You Will See This Sign This sign is commonly found: Before rural or suburban intersections In areas with limited visibility due to bends, hills, or obstructions Where stop-controlled junctions are not immediately visible Purpose of the Sign The purpose of the stop ahead sign is to give drivers early warning of an upcoming mandatory stop, allowing enough time to reduce speed safely and avoid sudden or dangerous braking at the intersection. Common Mistakes to Avoid Approaching the intersection at high speed Failing to notice the actual stop sign in time Rolling through the stop without coming to a full halt Ignoring cross-traffic at the intersection Safety Tips Begin slowing down as soon as you see the warning sign Scan the road ahead for the actual stop sign Come to a full stop before entering the intersection Check carefully for vehicles and pedestrians before proceeding Penalties for Ignoring the Sign Ignoring this warning may result in: Traffic fines for failing to stop Collisions at intersections Legal liability in the event of an accident Increased risk of serious injury or damage Summary The stop ahead sign in South Africa warns drivers that a stop-controlled intersection is approaching. Drivers must slow down early, stay alert, and be prepared to come to a complete stop to ensure safe crossing of the intersection.

On any road

To warn that there is a yield sign ahead, which you may not be able to see in time without a warning.

Slow down and be ready to stop if necessary.

Overview The Temporary Symbolic Signs (South Africa) – Traffic Control “Yield” Ahead Sign is a warning sign used on public roads to alert drivers that a yield-controlled intersection is approaching and may not be immediately visible. What the Sign Means This sign warns that there is a yield (give way) sign ahead. Drivers may need to slow down significantly and be prepared to stop if other traffic has priority at the intersection. How It Works in Practice A yield-controlled intersection is ahead. The actual yield sign may not be visible from a distance. Cross-traffic may have right of way. Drivers must be ready to stop if necessary. Driver Responsibilities Slow down well before reaching the intersection Be prepared to stop if required Check carefully for oncoming and crossing traffic Yield to vehicles that already have right of way Where You Will See This Sign This sign is commonly found: Before rural or suburban intersections At junctions with limited visibility Where yield signs are positioned late or are not easily visible Purpose of the Sign The purpose of the yield ahead sign is to give drivers early warning of an upcoming yield-controlled intersection, allowing them to reduce speed and prepare to give way safely to other traffic. Common Mistakes to Avoid Approaching the intersection at high speed Failing to notice cross-traffic Not yielding when required Assuming you have automatic right of way Safety Tips Slow down early when you see the warning sign Scan both directions for approaching vehicles Be ready to stop completely if needed Only proceed when it is safe to do so Penalties for Ignoring the Sign Ignoring yield warnings may result in: Traffic fines for failure to yield Collisions at intersections Legal liability in accidents Serious risk to all road users Summary The yield ahead sign in South Africa warns drivers of an upcoming yield-controlled intersection that may not be clearly visible. Drivers must slow down, stay alert, and be prepared to give way or stop if necessary.

On any road especially in rural areas.

To warn that there is a demarcated pedestrian crossing ahead.

Slow down and stop if a pedestrian is waiting at the crossing. Do not overtake other vehicles that have stopped at the pedestrian crossing.

Overview The Temporary Symbolic Signs (South Africa) – Pedestrian Crossing Sign are used on public roads, especially in temporary traffic management areas, to warn drivers that a marked pedestrian crossing is ahead. These signs are commonly used near roadworks, temporary walkways, or areas with increased pedestrian activity. What the Sign Means This sign indicates that a temporary or demarcated pedestrian crossing is approaching where pedestrians may cross the roadway. Drivers must slow down and be prepared to stop for pedestrians waiting or already crossing. The key purpose is: to warn of a pedestrian crossing ahead and require drivers to reduce speed and yield to pedestrians when necessary. How It Works in Practice A marked pedestrian crossing is located ahead. Pedestrians may be waiting to cross or already crossing the road. Vehicles must give pedestrians the right of way. Drivers must approach cautiously and remain alert. Driver Responsibilities Slow down when approaching the crossing Stop if pedestrians are waiting or crossing Yield to pedestrians at all times Do not overtake vehicles stopped at the crossing Where You Will See This Sign Near temporary roadworks and construction zones At temporary pedestrian crossings In rural or low-visibility areas Near schools, events, or temporary walkways Purpose of the Sign The purpose of the temporary pedestrian crossing sign is to alert drivers to pedestrian activity ahead so they can reduce speed, stop when required, and ensure the safety of pedestrians crossing the road. Common Mistakes to Avoid Failing to slow down near the crossing Ignoring pedestrians waiting to cross Overtaking vehicles stopped at the crossing Driving too fast through temporary traffic areas Safety Tips Reduce speed well before reaching the crossing Watch carefully for pedestrians from both sides Maintain a safe following distance Exercise extra caution in temporary traffic zones Penalties for Ignoring the Sign Ignoring pedestrian crossing warnings may result in: Fines for failure to yield to pedestrians Serious pedestrian injuries or collisions Traffic violations for unsafe overtaking Legal liability in the event of an accident Summary The temporary pedestrian crossing sign in South Africa warns drivers of a marked crossing ahead, often in temporary traffic situations. Drivers must slow down, remain alert, and always give pedestrians the right of way to ensure safe road use.

On roads where there are more pedestrians than normally can be expected.

To warn that pedestrians may be crossing the road for the next 2 km.

Slow down and look out for pedestrians who may be crossing the road.

Overview The Temporary Symbolic Signs (South Africa) – Pedestrian Sign are used on roads where unusually high pedestrian activity can be expected. These signs warn drivers that pedestrians may be crossing the road frequently over an extended distance ahead. What the Sign Means This sign indicates that pedestrians may be present on or near the roadway for the next 2 km. Drivers should expect increased pedestrian movement and possible road crossings. The key purpose is: to warn drivers of increased pedestrian activity ahead and require them to slow down and remain alert. How It Works in Practice Pedestrians may cross the road unexpectedly within the warning area. Higher-than-normal pedestrian activity is expected. Drivers must reduce speed and increase awareness. Extra caution is required in areas with poor visibility or heavy foot traffic. Driver Responsibilities Slow down when entering the pedestrian warning zone Look out continuously for pedestrians crossing the road Be prepared to stop if necessary Drive cautiously for the entire indicated distance Where You Will See This Sign Near schools or community areas In temporary work or event zones Along roads near settlements or informal crossings Where pedestrian activity is unusually high Purpose of the Sign The purpose of the pedestrian sign is to alert drivers to increased pedestrian activity ahead so they can reduce speed, remain vigilant, and safely respond to pedestrians crossing the road. Common Mistakes to Avoid Driving too fast through pedestrian zones Failing to watch for pedestrians crossing unexpectedly Ignoring warning signs in temporary traffic areas Not reducing speed in crowded areas Safety Tips Reduce speed immediately when entering the warning zone Watch both sides of the road carefully Be especially cautious at night or in poor weather Stay prepared to stop at any time Penalties for Ignoring the Sign Ignoring pedestrian warnings may result in: Collisions involving pedestrians Traffic fines for negligent or reckless driving Serious injuries or fatalities Legal liability for accidents caused Summary The temporary pedestrian sign in South Africa warns drivers that increased pedestrian activity may occur over the next 2 km. Drivers must slow down, remain alert, and watch carefully for pedestrians crossing the roadway.

On any road

To warn the driver that there can be cyclists ahead.

Slow down and be on the look out for cyclists using or crossing the road for the next 2 km.

Overview The Temporary Symbolic Signs (South Africa) – Cyclists Sign is a warning sign used on public roads to alert drivers that cyclists may be present ahead. It indicates that bicycles may be using or crossing the road over the next 2 km. What the Sign Means This sign warns drivers that cyclists may be travelling along or crossing the roadway ahead. Drivers should expect slower-moving bicycles and exercise extra caution in the area. How It Works in Practice Cyclists may ride on or alongside the road ahead. Bicycles may cross the roadway unexpectedly. Drivers must reduce speed and remain alert. Extra care is needed when overtaking cyclists. Driver Responsibilities Slow down when entering the cyclist zone Watch carefully for cyclists using or crossing the road Leave safe passing distance when overtaking bicycles Be prepared to stop or adjust speed if necessary Where You Will See This Sign This sign is commonly found: On roads frequently used by cyclists Near cycling routes or recreational areas Close to schools, parks, or residential areas Along rural or scenic roads popular with cyclists Purpose of the Sign The purpose of the cyclists sign is to warn drivers of possible bicycle traffic ahead so they can reduce speed, remain alert, and safely share the road with cyclists. Common Mistakes to Avoid Passing cyclists too closely Driving too fast in cyclist areas Failing to check for cyclists before turning Underestimating cyclists’ presence or speed Safety Tips Slow down and maintain a safe following distance Check mirrors and blind spots regularly Give cyclists enough room when overtaking Stay alert for cyclists crossing at intersections Penalties for Ignoring the Sign Ignoring cyclist warnings may result in: Traffic fines for unsafe driving Collisions involving cyclists Legal consequences in the event of injury Serious risk to vulnerable road users Summary The cyclists sign in South Africa warns drivers that cyclists may be using or crossing the road ahead for the next 2 km. Drivers must slow down, remain alert, and share the road safely with cyclists.

On any road

To warn that there may be free ranging animals such as cattle, horses or sheep on the road.

Slow down and be on the look out for the next 2 km for animals.

Overview The Temporary Symbolic Signs (South Africa) – Farm Animals Sign is a warning sign used on public roads to alert drivers that free-ranging farm animals may be present ahead. It indicates that animals such as cattle, horses, or sheep may be on or near the roadway for the next 2 km. What the Sign Means This sign warns drivers that farm animals may cross, stand on, or move along the road ahead. Animals can behave unpredictably and may enter the roadway suddenly, creating a hazard for motorists. How It Works in Practice Farm animals may be present on or near the roadway. Animals may cross unexpectedly, especially in rural areas. Drivers must reduce speed and stay alert. Animals may move slowly or unpredictably in traffic. Driver Responsibilities Slow down when entering the animal warning zone Watch carefully for animals on or near the road Be prepared to stop if animals enter the roadway Avoid sounding the horn excessively, as it may startle animals Where You Will See This Sign This sign is commonly found: On rural and farming roads Near grazing lands or livestock areas In regions where animals move freely across roads Close to farms and agricultural communities Purpose of the Sign The purpose of the farm animals sign is to warn drivers of possible animal activity ahead so they can reduce speed, remain cautious, and avoid collisions with livestock. Common Mistakes to Avoid Driving too fast through animal-warning areas Assuming animals will move away from traffic Swerving suddenly to avoid animals Failing to watch roadside areas carefully Safety Tips Reduce speed well before reaching the area Scan both sides of the road for animal movement Brake smoothly if animals are near the roadway Proceed carefully until clear of the warning zone Penalties for Ignoring the Sign Ignoring farm animal warnings may result in: Collisions with livestock Vehicle damage and injury Traffic fines for negligent driving Legal liability for accidents involving animals Summary The farm animals sign in South Africa warns drivers that free-ranging animals may be on or near the road for the next 2 km. Drivers must slow down, stay alert, and proceed carefully to avoid collisions with livestock.

On any road

To warn that there may be free ranging animals such as cattle, horses or sheep on the road.

Slow down and be on the look out for the next 2 km for animals.

Overview The Temporary Symbolic Signs (South Africa) – Farm Animals Sign is a warning sign placed on public roads to alert drivers that free-ranging farm animals may be present ahead. It warns motorists to expect animals such as cattle, horses, or sheep on or near the roadway over the next 2 km. What the Sign Means This sign indicates that animals may cross, stand on, or move along the road ahead. Because animals can act unpredictably, drivers must be extra cautious when travelling through the area. How It Works in Practice Farm animals may enter or cross the roadway unexpectedly. Animals may move slowly or remain standing on the road. Drivers need to reduce speed and stay alert. Extra caution is required, especially at night or in poor visibility. Driver Responsibilities Slow down immediately when entering the warning area Watch carefully for animals on or near the road Be prepared to stop if animals block the roadway Drive carefully to avoid startling animals Where You Will See This Sign This sign is commonly found: On rural and agricultural roads Near grazing fields and livestock farms In farming communities where animals roam freely Along roads crossing open farmland Purpose of the Sign The purpose of the farm animals sign is to warn drivers of possible livestock activity ahead, helping them reduce speed and avoid dangerous collisions with animals on the roadway. Common Mistakes to Avoid Driving too fast through animal-warning zones Assuming animals will move out of the way Swerving suddenly to avoid animals Ignoring roadside movement or warning signs Safety Tips Reduce speed well before reaching the area Use headlights properly during low-light conditions Brake gently and maintain vehicle control if animals appear Proceed carefully until you have passed the warning zone Penalties for Ignoring the Sign Ignoring animal-warning signs may result in: Collisions with livestock Serious injury or vehicle damage Traffic fines for negligent driving Legal liability for accidents involving animals Summary The farm animals sign in South Africa warns drivers that free-ranging livestock may be on or near the road ahead for the next 2 km. Drivers must slow down, remain alert, and drive carefully to avoid collisions with animals.

On any road

To warn that there may be free ranging animals such as cattle, horses or sheep on the road.

Slow down and be on the look out for the next 2 km for animals.

Overview The Temporary Symbolic Signs (South Africa) – Farm Animals Sign is a warning sign used on public roads to alert drivers that free-ranging livestock may be present ahead. It indicates that animals such as cattle, horses, or sheep may be on or near the roadway for up to 2 km. What the Sign Means This sign warns that farm animals may enter, cross, or remain on the road ahead. Because livestock can behave unpredictably, drivers must expect sudden animal movement in the roadway. How It Works in Practice Animals may be standing on or crossing the road. Livestock may move slowly or block the roadway. Drivers must reduce speed and stay alert. Extra caution is required in rural and farming areas. Driver Responsibilities Slow down immediately when entering the warning zone Watch carefully for animals on or near the road Be prepared to stop if animals obstruct the roadway Drive cautiously to avoid startling livestock Where You Will See This Sign This sign is commonly found: On rural and farming roads Near grazing fields and livestock enclosures In agricultural communities Along roads crossing open farmland Purpose of the Sign The purpose of the farm animals sign is to warn drivers of possible livestock activity ahead so they can reduce speed, stay alert, and avoid collisions with animals on the roadway. Common Mistakes to Avoid Driving too fast in animal-warning areas Assuming animals will move away from traffic Swerving suddenly to avoid livestock Ignoring roadside movement or warning signs Safety Tips Reduce speed well before entering the area Scan both sides of the road continuously Brake smoothly if animals appear ahead Proceed carefully until fully clear of the zone Penalties for Ignoring the Sign Ignoring this warning may result in: Collisions with livestock Vehicle damage or serious injury Traffic fines for negligent driving Legal liability in accidents involving animals Summary The farm animals sign in South Africa warns drivers that free-ranging livestock may be present on or near the road for the next 2 km. Drivers must slow down, stay alert, and drive carefully to prevent collisions with animals.

On any road

To warn that there is a railway crossing ahead.

Slow down and look to the right and left for oncoming trains. If a train is approaching stop in time, but not within the railway crossing reserve.

Overview The Temporary Symbolic Signs (South Africa) – Railway Crossing Sign are used on public roads to warn drivers that a railway level crossing is ahead. These temporary signs are often placed where visibility is reduced, during roadworks, or where additional warning is needed before reaching the crossing. What the Sign Means This sign indicates that a railway crossing is approaching and trains may cross the road. Drivers must slow down, check for trains from both directions, and be prepared to stop if necessary. The key purpose is: to warn of an upcoming railway crossing and require drivers to slow down and prepare to stop for trains. How It Works in Practice A railway line crosses the road ahead. Trains may approach from either direction. Drivers must assess the tracks before crossing. Stopping may be required depending on train movement. Driver Responsibilities Slow down well in advance of the crossing Look both left and right for approaching trains Be prepared to stop if a train is approaching Do not enter the crossing unless it is completely clear Important Safety Rule If a train is approaching, you must stop before the railway crossing and never stop on the railway tracks or within the crossing reserve area. Where You Will See This Sign Before railway level crossings In rural or low-visibility areas Near construction or temporary traffic zones Where additional warning is required before tracks Purpose of the Sign The purpose of the railway crossing warning sign is to alert drivers early so they can reduce speed, check for trains, and safely stop before entering a railway crossing if necessary. Common Mistakes to Avoid Failing to slow down before the crossing Not checking both directions for trains Stopping on or too close to the tracks Attempting to cross when a train is approaching Safety Tips Always approach railway crossings with caution Look and listen for trains before crossing Cross only when the tracks are completely clear Never rush across a railway crossing Summary The temporary railway crossing sign in South Africa warns drivers of an approaching level crossing. Drivers must slow down, check both directions for trains, and only proceed when it is safe and the crossing is clear.

On any road

To warn that there is a structure ahead of which the height is indicated on the road traffic sign.

If your vehicle is higher than the bridge or structure as indicated by this sign, find an alternative route.

Overview The Temporary Symbolic Signs (South Africa) – Height Restriction Sign is a warning sign used on public roads to alert drivers that a low-clearance structure is ahead. It indicates the maximum height allowed for vehicles passing beneath a bridge or overhead structure. What the Sign Means This sign warns that there is a bridge, tunnel, or overhead structure ahead with a specific height limit. Vehicles taller than the indicated clearance cannot pass safely and must use an alternative route. How It Works in Practice An overhead structure with limited clearance is ahead. The maximum height allowed is clearly indicated on the sign. Vehicles exceeding the height limit risk serious damage or blockage. Alternative routes may be required for tall vehicles. Driver Responsibilities Check your vehicle height before approaching the structure Slow down and read the height restriction carefully Do not attempt to pass if your vehicle exceeds the limit Find and use an alternative route if necessary Where You Will See This Sign This sign is commonly found: Before bridges with low clearance At tunnels or underpasses Near railway bridges or overhead structures In urban and rural areas with height-limited infrastructure Purpose of the Sign The purpose of the height restriction sign is to prevent collisions between tall vehicles and overhead structures by clearly warning drivers of clearance limits in advance. Common Mistakes to Avoid Ignoring height warnings and attempting to pass anyway Misjudging vehicle height (especially loaded trucks) Failing to plan alternative routes Not accounting for roof loads or cargo height Safety Tips Always know the exact height of your vehicle Check warning signs well in advance Use navigation tools for alternative routes if needed Never attempt to squeeze through a low-clearance structure Penalties for Ignoring the Sign Ignoring height restrictions may result in: Severe vehicle and infrastructure damage Traffic fines and liability for repairs Road blockages and traffic disruption Risk of serious accidents Summary The height restriction sign in South Africa warns drivers of a low-clearance structure ahead. Drivers must check their vehicle height, slow down, and use an alternative route if their vehicle exceeds the indicated limit.

On any road but especially in mountainous areas.

To warn that curves in the road or other structures on the side of the road make it impossible for vehicles longer than the length indicated on this road sign.

Find an alternative route if your vehicle is longer that the length indicated in metres on this sign.

Overview The Temporary Symbolic Signs (South Africa) – Length Restriction Sign is a warning sign used on public roads, especially in mountainous or constrained areas, to indicate that long vehicles may not be able to pass safely. It specifies the maximum vehicle length allowed on a section of road. What the Sign Means This sign warns that road conditions such as sharp curves, narrow passages, or roadside structures make it unsafe for vehicles longer than the indicated length to proceed. Vehicles exceeding the limit must use an alternative route. How It Works in Practice The road ahead has physical limitations affecting long vehicles. Sharp bends or tight turns may prevent longer vehicles from navigating safely. Roadside obstacles may reduce available turning space. Length limits are clearly indicated on the sign. Driver Responsibilities Check your vehicle length before proceeding Slow down and read the restriction carefully Do not attempt to enter if your vehicle exceeds the limit Use an alternative route if necessary Where You Will See This Sign This sign is commonly found: On mountainous roads with sharp curves In narrow rural or urban streets Near bridges or constrained road sections Where turning space is limited by terrain or structures Purpose of the Sign The purpose of the length restriction sign is to prevent long vehicles from entering road sections where they cannot safely manoeuvre, reducing the risk of blockages, accidents, and damage to infrastructure. Common Mistakes to Avoid Entering restricted roads with oversized vehicles Misjudging vehicle length, especially with trailers Ignoring alternative route instructions Attempting to reverse or turn in confined spaces Safety Tips Know the total length of your vehicle combination Plan your route in advance if driving a long vehicle Obey all restriction signage immediately Use designated routes for heavy or long transport Penalties for Ignoring the Sign Ignoring length restrictions may result in: Vehicle entrapment on narrow roads Traffic fines and liability for obstruction Damage to infrastructure or property Serious traffic delays or accidents Summary The length restriction sign in South Africa warns drivers that vehicles longer than the specified measurement cannot safely proceed. Drivers must check their vehicle length and use an alternative route if necessary to avoid obstruction or accidents.

On any road but especially in mountainous areas.

To warn that the road will descend steeply.

Be aware of slow-moving traffic, particularly in mountainous areas with sharp curves. Allow for a longer stopping distance on a descent and especially when your vehicle is heavily laden.

Overview The Temporary Symbolic Signs (South Africa) – Steep Descent Sign are used to warn drivers of a temporary or increased hazard where the road ahead descends sharply. These are often placed in roadworks, detours, or areas where normal road conditions are temporarily changed. What the Sign Means This sign indicates that a steep downhill section is approaching, where vehicles may gain speed quickly and require more braking distance. It also warns of possible slow-moving vehicles, especially in mountainous or temporary traffic conditions. The key purpose is: to warn of a steep descent ahead and require drivers to slow down, maintain control, and increase stopping distance. How It Works in Practice The road drops sharply in elevation over a short distance. Vehicles may accelerate more quickly than expected. Heavy vehicles may struggle to maintain speed control. Sharp curves or temporary road layouts may increase risk. Driver Responsibilities Slow down before entering the descent Use a lower gear for better engine control Increase following distance from other vehicles Brake carefully and avoid continuous braking Where You Will See This Sign In mountainous or hilly areas Near roadworks or temporary detours On rural roads with steep gradients In areas with altered or unstable road conditions Purpose of the Sign The purpose of the temporary steep descent sign is to alert drivers to hazardous downhill conditions so they can reduce speed, maintain control, and safely manage braking and vehicle stability. Common Mistakes to Avoid Driving downhill too fast Using brakes continuously and causing overheating Following other vehicles too closely Ignoring temporary road condition warnings Safety Tips Slow down before reaching the descent Select a lower gear for better control Keep a safe distance from other vehicles Be extra cautious in wet or temporary road conditions Penalties for Ignoring the Sign Ignoring steep descent warnings may result in: Loss of vehicle control on slopes Brake failure due to overheating Serious accidents in temporary road zones Traffic fines for negligent driving Summary The temporary steep descent sign in South Africa warns drivers of a dangerous downhill section, often in altered or temporary road conditions. Drivers must slow down, use proper gear control, and maintain a safe following distance to ensure safe travel.

On any road but especially in mountainous areas.

To warn that the road will climb steeply.

Be aware of slow-moving traffic, particularly in mountainous areas with sharp curves. Allow for a longer stopping distance on a descent and especially when your vehicle is heavily laden.

Overview The Temporary Symbolic Signs (South Africa) – Steep Ascend Sign are used to warn drivers that a steep uphill section is ahead, often in temporary traffic situations such as roadworks, detours, or altered road conditions. These signs are especially important in mountainous or hilly areas. What the Sign Means This sign indicates that the road ahead will climb steeply, requiring more engine power and careful speed control. Vehicles may move slowly, especially heavy vehicles or those carrying loads. The key purpose is: to warn of a steep uphill section ahead and require drivers to adjust speed and gear for safe climbing. How It Works in Practice The road gradient increases significantly uphill. Vehicles may slow down due to gravity and load weight. Heavy vehicles may move at reduced speeds. Sharp curves or temporary layouts may make climbing more difficult. Driver Responsibilities Maintain a steady, reduced speed before the incline Select a lower gear to prevent engine strain Avoid stopping on steep sections if possible Keep a safe distance from slower vehicles Where You Will See This Sign In mountainous or hilly terrain Near roadworks or temporary detours On rural roads with steep inclines In areas with altered or uneven road conditions Purpose of the Sign The purpose of the temporary steep ascend sign is to warn drivers of a steep uphill section so they can adjust speed, gear selection, and driving behaviour to safely manage the incline. Common Mistakes to Avoid Approaching the incline at high speed Using the wrong gear and stalling the vehicle Following slower vehicles too closely Attempting unsafe overtaking on steep climbs Safety Tips Reduce speed before starting the climb Select a lower gear for better power control Keep a safe following distance from heavy vehicles Be patient on steep or winding roads Penalties for Ignoring the Sign Ignoring steep ascent warnings may result in: Engine strain or vehicle stalling Loss of control on uphill curves Traffic congestion or collisions in slow zones Fines for unsafe or reckless driving Summary The temporary steep ascend sign in South Africa warns drivers of a steep uphill section ahead, often in temporary road conditions. Drivers must reduce speed, select appropriate gears, and drive carefully to safely manage the climb.

Especially in mountainous areas.

To warn that heavy vehicles travel slowly down a descent.

Slow down and, particularly in mountainous areas with sharp curves, be able to stop within the distance you can see. Remember to allow for a longer stopping distance on a descent especially when your vehicle is heavily laden.

Overview The Temporary Symbolic Signs (South Africa) – Slow Moving Heavy Vehicles Sign are used on public roads, especially in mountainous or temporary traffic areas, to warn drivers that heavy vehicles ahead may be moving slowly. These conditions are common on steep descents where large vehicles require extra control and braking distance. What the Sign Means This sign indicates that slow-moving heavy vehicles, such as trucks or buses, are likely to be travelling ahead—often downhill on steep roads. Drivers should expect reduced speeds and possible queues behind these vehicles. The key purpose is: to warn of slow-moving heavy vehicles ahead and require drivers to reduce speed and increase stopping distance. How It Works in Practice Heavy vehicles descend steep roads at reduced speeds for safety. Brake use and engine braking cause slower movement. Sharp curves may further reduce vehicle speed. Other vehicles must adjust to match road conditions safely. Driver Responsibilities Slow down when approaching the warning area Maintain a safe following distance behind heavy vehicles Be prepared to stop within visible distance Exercise extra caution on downhill curves Where You Will See This Sign In mountainous or hilly regions On steep descending roads Near roadworks or temporary traffic diversions On routes frequently used by freight vehicles Purpose of the Sign The purpose of this sign is to alert drivers that heavy vehicles may be moving slowly ahead, especially on steep descents, so they can adjust speed and maintain a safe stopping distance. Common Mistakes to Avoid Driving too closely behind heavy vehicles Attempting unsafe overtaking on steep downhill roads Ignoring reduced visibility on curves Failing to adjust speed for gradient conditions Safety Tips Keep a larger following distance than normal Reduce speed early when entering descent areas Be patient behind slow-moving trucks or buses Use gears and braking carefully on slopes Penalties for Ignoring the Sign Ignoring warnings about slow-moving heavy vehicles may result in: Rear-end collisions on steep descents Loss of control on winding roads Traffic fines for following too closely or reckless driving Serious injury in downhill accidents Summary The slow-moving heavy vehicles sign in South Africa warns drivers that large vehicles may be travelling slowly ahead, especially on steep descents. Drivers must reduce speed, increase following distance, and remain alert to safely share the road in these conditions.

On any tarred road, especially in the vicinity of farms.

To warn that the tarred road you are driving on will end soon and will have a gravel surface ahead.

Slow down and look out for a ditches or potholes at the joint between the gravel and the tarred surface. Steering will be lighter on the gravel, vehicles will tend to skid easier and will need a longer stopping distance.

Overview The Temporary Symbolic Signs (South Africa) – Gravel Road Begins Sign are used on tarred roads, especially near rural or farming areas, to warn drivers that the paved surface is about to end and a gravel road begins ahead. This change in road surface can significantly affect vehicle handling and safety. What the Sign Means This sign indicates that the tarred (asphalt) road will end shortly and transition into a gravel surface. Drivers must prepare for different driving conditions, including reduced traction and increased stopping distance. The key purpose is: to warn of a change from tarred to gravel road ahead and require drivers to slow down and adjust driving accordingly. How It Works in Practice The smooth tar surface transitions to loose gravel. Vehicle traction becomes reduced, especially during braking and cornering. Steering may feel lighter and less stable. Dust and loose stones may reduce visibility and grip. Driver Responsibilities Slow down before reaching the gravel section Maintain a firm but controlled grip on the steering wheel Increase following distance from other vehicles Drive cautiously over the transition area Where You Will See This Sign Near farms and rural access roads At the end of tarred municipal roads In agricultural or remote areas Where paved roads transition to unsealed surfaces Purpose of the Sign The purpose of the gravel road begins sign is to warn drivers of an upcoming change in road surface so they can reduce speed, maintain control, and safely adjust to reduced traction conditions. Common Mistakes to Avoid Entering gravel roads at high speed Braking suddenly on loose gravel Oversteering due to reduced traction Failing to adjust following distance Safety Tips Slow down before the surface change Steer gently and avoid sudden movements Increase braking distance significantly Watch for potholes, ditches, or loose stones Penalties for Ignoring the Sign Ignoring gravel road warnings may result in: Loss of vehicle control or skidding Vehicle damage from loose stones or potholes Traffic fines for negligent driving Increased risk of accidents on unsealed roads Summary The gravel road begins sign in South Africa warns drivers that a tarred road is ending and a gravel surface is ahead. Drivers must slow down, adjust steering and braking, and drive carefully due to reduced traction and changed road conditions.

On any road

To warn that the road narrows when crossing a bridge.

Slow down and, if there is oncoming traffic, try not to cross the bridge at the same time as an approaching vehicle.

Overview The Temporary Symbolic Signs (South Africa) – Narrow Bridge Sign are used on public roads to warn drivers that the road ahead will narrow when crossing a bridge. This is especially important in temporary traffic situations, such as roadworks or diverted traffic routes. What the Sign Means This sign indicates that a bridge ahead has limited width, and vehicles may need to take turns crossing if the bridge cannot safely accommodate traffic in both directions at the same time. The key purpose is: to warn of a narrow bridge ahead and require drivers to slow down and coordinate safe crossing with oncoming traffic. How It Works in Practice The roadway reduces in width at the bridge. Only limited space may be available for passing vehicles. Oncoming vehicles may need to yield before crossing. Visibility and space constraints increase risk. Driver Responsibilities Slow down well before reaching the bridge Check carefully for oncoming vehicles Do not enter the bridge if another vehicle is already crossing Proceed only when the bridge is clear or it is your turn to cross safely Where You Will See This Sign On rural or secondary roads At bridges under repair or temporary use In roadwork diversion routes On older or single-lane bridges Purpose of the Sign The purpose of the narrow bridge sign is to alert drivers to reduced road width ahead so they can reduce speed, assess oncoming traffic, and safely coordinate passage over the bridge. Common Mistakes to Avoid Entering the bridge at high speed Assuming two vehicles can pass simultaneously Failing to check for oncoming traffic Blocking the bridge while waiting Safety Tips Approach the bridge slowly and cautiously Yield to oncoming vehicles already on the bridge Keep a safe distance before entering Proceed only when the bridge is fully clear Penalties for Ignoring the Sign Ignoring narrow bridge warnings may result in: Collisions with oncoming vehicles Traffic obstruction on the bridge Vehicle damage or injury Fines for negligent or unsafe driving Summary The narrow bridge sign in South Africa warns drivers that the road ahead reduces in width at a bridge. Drivers must slow down, check for oncoming traffic, and cross only when it is safe to do so.

On any road

To warn that the carriageway ahead narrows to a width that will make it possible for only one vehicle at a time to pass.

Slow down if there is oncoming traffic, stop at least 6m from the structure and yield to the other vehicle.

Overview The Temporary Symbolic Signs (South Africa) – One Vehicle Width Structure Sign are used on public roads to warn drivers that the road ahead narrows so much that only one vehicle can pass at a time. This typically occurs at temporary structures, roadworks, or narrow bridges. What the Sign Means This sign indicates that the carriageway ahead is restricted to a single-vehicle width, meaning two vehicles cannot safely pass each other at the same time. Drivers must coordinate movement with oncoming traffic. The key purpose is: to warn of an extremely narrow section ahead and require drivers to yield and proceed one vehicle at a time. How It Works in Practice The road narrows to a single lane width at a structure or obstruction. Only one vehicle can safely pass through at a time. Oncoming traffic must take turns crossing. Stopping points are used to control flow safely. Driver Responsibilities Slow down when approaching the narrowing Be prepared to stop at least 6 metres before the structure Yield to oncoming vehicles already in or approaching the narrow section Proceed only when the path is completely clear Where You Will See This Sign At temporary roadworks or construction zones On narrow rural bridges or culverts In mountainous or constrained road sections Where road width is temporarily reduced Purpose of the Sign The purpose of the one-vehicle-width structure sign is to prevent collisions and congestion by warning drivers in advance that only one vehicle can safely pass at a time, requiring strict yielding behaviour. Common Mistakes to Avoid Entering the narrow section without checking for oncoming traffic Failing to stop when another vehicle is already inside the section Trying to pass simultaneously with another vehicle Not maintaining a safe stopping distance before the structure Safety Tips Approach slowly and prepare to stop early Always yield to vehicles already in the narrow section Maintain clear communication through vehicle positioning Proceed only when you are certain the way is clear Penalties for Ignoring the Sign Ignoring this warning may result in: Head-on collisions in narrow sections Severe traffic blockages Vehicle damage and injury Fines for reckless or negligent driving Summary The one-vehicle-width structure sign in South Africa warns drivers that only a single vehicle can pass through the road ahead at a time. Drivers must slow down, stop if necessary, and yield properly to ensure safe passage through the narrow section.

On any road

To warn that the road ahead narrows from both sides.

Slow down and adjust your position on the carriageway since oncoming vehicles will pass close to you.

Overview The Temporary Symbolic Signs (South Africa) – Road Narrows from Both Sides Sign are used on public roads to warn drivers that the available road width ahead will reduce from both sides. This is common in temporary traffic zones, roadworks, or constrained sections of roadway. What the Sign Means This sign indicates that the carriageway ahead will become narrower on both sides, reducing the space available for vehicles travelling in both directions. Drivers will need to share limited road space more carefully with oncoming traffic. The key purpose is: to warn of a narrowing road ahead and require drivers to slow down and position their vehicles safely within reduced space. How It Works in Practice The road width decreases gradually or suddenly from both sides. Traffic lanes become tighter, leaving less clearance between vehicles. Oncoming vehicles will pass closer than normal. Roadworks or barriers may reduce usable space. Driver Responsibilities Slow down before entering the narrowed section Adjust your position to stay within the safe driving area Maintain a safe but reduced lateral distance from other vehicles Be prepared for closer oncoming traffic Where You Will See This Sign At roadworks and construction zones On bridges or culverts under repair In narrow rural or mountainous roads Where temporary barriers reduce lane width Purpose of the Sign The purpose of the road narrows from both sides sign is to warn drivers in advance that reduced road width will require careful positioning, slower speeds, and increased awareness of oncoming traffic. Common Mistakes to Avoid Driving at normal speed into a narrowed section Drifting too close to oncoming traffic Ignoring reduced shoulder or lane space Overtaking in restricted width areas Safety Tips Reduce speed early when approaching the sign Keep your vehicle centred in your lane Be alert for wide vehicles or roadwork equipment Allow extra space for oncoming vehicles passing close by Penalties for Ignoring the Sign Ignoring narrowing road warnings may result in: Side-swipe collisions with oncoming vehicles Damage from road barriers or construction equipment Traffic fines for unsafe driving Increased risk of multi-vehicle accidents Summary The road narrows from both sides sign in South Africa warns drivers that the roadway ahead will become tighter, reducing clearance for all vehicles. Drivers must slow down, stay centered in their lane, and prepare for close passing with oncoming traffic.

On any road

To warn that the road ahead narrows from the left or from the right-hand side.

Slow down and adjust your position on the roadway.

Overview The Temporary Symbolic Signs (South Africa) – Road Narrows from One Side Only Sign are used on public roads to warn drivers that the road ahead will reduce in width from either the left or the right-hand side. These signs are commonly used in roadworks or areas with temporary obstructions. What the Sign Means This sign indicates that one side of the roadway will narrow ahead, reducing available space for vehicles. Depending on the direction indicated, either the left or right side of the road will be affected. The key purpose is: to warn of a one-sided road narrowing ahead and require drivers to adjust position and reduce speed. How It Works in Practice One edge of the road becomes restricted due to construction or obstacles. Lane width is reduced on either the left or right side. Vehicles must shift slightly away from the narrowing side. Oncoming traffic may pass closer than usual on affected sections. Driver Responsibilities Slow down before reaching the narrowed section Adjust your position away from the narrowing side Maintain control and avoid sudden steering movements Stay alert for vehicles merging or road workers nearby Where You Will See This Sign At roadworks and maintenance zones Near bridges or roadside repairs On rural or urban roads with temporary obstructions Where one side of the road is closed or damaged Purpose of the Sign The purpose of the road narrows from one side sign is to alert drivers in advance that part of the roadway will be unavailable, allowing them to adjust speed and position safely to avoid collisions or lane conflicts. Common Mistakes to Avoid Failing to move away from the narrowing side Driving at normal speed into a reduced-width area Overtaking near roadwork or narrowed sections Ignoring workers or barriers on the affected side Safety Tips Reduce speed early when approaching the sign Shift gently toward the safer side of the lane Watch for construction workers and equipment Maintain a steady, controlled driving path Penalties for Ignoring the Sign Ignoring this warning may result in: Side collisions with barriers or other vehicles Damage to vehicles or roadside infrastructure Fines for unsafe or negligent driving Increased risk of accidents in work zones Summary The road narrows from one side sign in South Africa warns drivers that either the left or right side of the road will be reduced ahead. Drivers must slow down, adjust their position, and proceed carefully through the narrowed section.

On any road

To warn that the road ahead narrows from the left or from the right-hand side.

Slow down and adjust your position on the roadway.

Overview The Temporary Symbolic Signs (South Africa) – Road Narrows from One Side Only Sign are used on public roads to warn drivers that the roadway ahead will become narrower on either the left or right-hand side. These signs are typically placed in temporary situations such as roadworks or where part of the road is obstructed. What the Sign Means This sign indicates that only one side of the road will be affected, causing the usable driving space to shift or reduce from either the left or right. Drivers must adjust their position to stay within the safe part of the carriageway. The key purpose is: to warn of a one-sided road narrowing ahead and require drivers to slow down and reposition safely. How It Works in Practice One edge of the road becomes restricted or closed. The usable lane shifts away from the affected side. Space between vehicles and roadside hazards becomes reduced. Traffic flow continues but within a narrower path. Driver Responsibilities Slow down before reaching the narrowing Adjust your vehicle position away from the closed side Maintain steady steering without sudden movements Watch for road workers, barriers, or obstacles Where You Will See This Sign At roadworks and maintenance zones Near damaged road edges or shoulder repairs In urban or rural temporary traffic diversions Where one lane edge is closed for safety reasons Purpose of the Sign The purpose of this sign is to alert drivers early that part of the road will be unavailable on one side, allowing them to reduce speed and safely adjust their driving position. Common Mistakes to Avoid Failing to shift away from the narrowing side Driving too fast into a restricted lane area Ignoring roadwork barriers or cones Overtaking in a narrowed section Safety Tips Reduce speed as soon as you see the sign Move gently toward the open side of the road Stay alert for construction workers and equipment Keep a safe and steady driving line Penalties for Ignoring the Sign Ignoring this warning may result in: Collisions with barriers or roadwork equipment Side-swiping other vehicles Traffic fines for unsafe driving in work zones Increased risk of accidents due to reduced space Summary The road narrows from one side sign in South Africa warns drivers that either the left or right side of the road will be reduced ahead. Drivers must slow down, adjust their position, and proceed carefully through the narrowed section.

On any road

To warn that there is a depression or a ridge in the road, or that the road in general is uneven and potholed.

Slow down to avoid potholes without endangering other traffic.

Overview The Temporary Symbolic Signs (South Africa) – Uneven Roadway Begins Sign are used to warn drivers that the road surface ahead becomes uneven, rough, or damaged. This is common in roadworks, rural areas, or sections where maintenance is underway. What the Sign Means This sign indicates that the road ahead may contain depressions, ridges, potholes, or general surface irregularities that can affect vehicle control and comfort. The key purpose is: to warn of an uneven road surface ahead and require drivers to slow down and drive carefully to avoid damage or loss of control. How It Works in Practice The road surface may be rough, broken, or poorly maintained. Potholes or dips may occur without warning. Vehicle suspension and tyres are placed under increased strain. Sudden steering or braking can be dangerous on uneven surfaces. Driver Responsibilities Reduce speed before entering the uneven section Keep a firm but controlled grip on the steering wheel Avoid sudden braking or sharp steering movements Watch carefully for potholes and surface changes Where You Will See This Sign On rural or poorly maintained roads In roadworks and construction zones Near recently damaged or repaired road sections On gravel or semi-constructed roads Purpose of the Sign The purpose of the uneven roadway begins sign is to warn drivers of unsafe road surface conditions so they can slow down, maintain control, and avoid damage or accidents caused by potholes or irregular road surfaces. Common Mistakes to Avoid Driving at normal speed on rough roads Sudden braking over potholes or ridges Swerving sharply to avoid defects without checking traffic Ignoring repeated surface warnings in the area Safety Tips Slow down early when you see the sign Maintain steady steering to absorb bumps safely Increase following distance from other vehicles Scan the road ahead for potholes and uneven patches Penalties for Ignoring the Sign Ignoring uneven roadway warnings may result in: Tyre or suspension damage Loss of vehicle control Collisions caused by sudden swerving Fines for negligent driving in hazardous conditions Summary The uneven roadway begins sign in South Africa warns drivers that the road ahead is rough, uneven, or potholed. Drivers must slow down, stay alert, and drive carefully to maintain control and avoid vehicle damage.

On any road

To warn that there are speed humps on the carriageway ahead which require a reduction of speed.

Slow down so that you can drive over the speed humps without damaging your vehicle or losing control.

Overview The Temporary Symbolic Signs (South Africa) – Speed Humps Sign are used on public roads to warn drivers that speed humps are present ahead. These are often installed temporarily in roadworks, residential areas, or traffic-calming zones. What the Sign Means This sign indicates that raised sections (speed humps) are located on the road ahead and will require drivers to reduce speed significantly to pass safely. The key purpose is: to warn of speed humps ahead and require drivers to slow down to avoid vehicle damage or loss of control. How It Works in Practice Raised humps are placed across or along the roadway. Vehicles must slow down before crossing them. Driving too fast over humps can damage suspension or tyres. Humps are used to control traffic speed in specific areas. Driver Responsibilities Reduce speed well in advance of the humps Approach humps straight to maintain vehicle stability Cross slowly to avoid vehicle damage Maintain safe following distance from other vehicles Where You Will See This Sign In residential and urban areas Near schools or pedestrian-heavy zones In temporary roadwork or traffic calming areas On rural roads where speed control is required Purpose of the Sign The purpose of the speed humps sign is to alert drivers in advance so they can slow down and safely pass over raised road surfaces without damaging their vehicles or losing control. Common Mistakes to Avoid Approaching speed humps at high speed Braking suddenly while on the hump Swerving around humps into traffic lanes Following other vehicles too closely over humps Safety Tips Slow down before reaching the speed humps Cross the humps gently and steadily Keep both hands firmly on the steering wheel Watch for pedestrians in speed-controlled zones Penalties for Ignoring the Sign Ignoring speed hump warnings may result in: Vehicle suspension or tyre damage Loss of control over bumps Traffic fines for reckless driving Increased risk of pedestrian or vehicle collisions Summary The speed humps sign in South Africa warns drivers of raised road surfaces ahead. Drivers must slow down and cross carefully to avoid damage to their vehicle and ensure safe passage.

On any road

To warn about unusually slippery conditions on the road ahead.

Slow down since any sudden braking or harsh steering could cause your vehicle to start skidding sooner than usual for the next 2 km.

Overview The Temporary Symbolic Signs (South Africa) – Slippery Road Sign are used on public roads to warn drivers that the surface ahead is unusually slippery. This may be due to weather conditions, roadworks, dust, oil, gravel, or other temporary hazards. What the Sign Means This sign indicates that reduced road grip can be expected for the next section of road (typically up to 2 km). Vehicles may skid more easily than normal, especially when braking, accelerating, or turning. The key purpose is: to warn of slippery road conditions ahead and require drivers to reduce speed and drive with extreme caution. How It Works in Practice Road surface traction is reduced. Skidding risk increases during braking and cornering. Weather (rain, ice, or mist) or road materials may reduce grip. Vehicle control becomes more sensitive to sudden movements. Driver Responsibilities Slow down immediately when approaching the sign Avoid harsh braking or sudden acceleration Steer smoothly and gently Increase following distance significantly Where You Will See This Sign On wet or recently rained-on roads In roadworks with loose materials On gravel or dusty temporary surfaces In shaded areas where moisture may persist Purpose of the Sign The purpose of the slippery road sign is to alert drivers that road grip is reduced so they can adjust their speed and driving behaviour to prevent skidding and loss of control. Common Mistakes to Avoid Braking suddenly on slippery surfaces Making sharp steering movements Driving at normal speed despite reduced traction Following other vehicles too closely Safety Tips Reduce speed as soon as you see the sign Drive smoothly without sudden inputs Keep extra distance from vehicles ahead Be especially cautious in wet or muddy conditions Penalties for Ignoring the Sign Ignoring slippery road warnings may result in: Vehicle skidding or spinning Loss of control on bends or during braking Collisions with other vehicles or roadside objects Fines for negligent or dangerous driving Summary The slippery road sign in South Africa warns drivers that road conditions ahead reduce tyre grip for up to 2 km. Drivers must slow down, avoid sudden movements, and drive carefully to maintain control and prevent skidding.